Connecting Xiaomi Smart Teapot to Yandex Stations: Full Instruction with Solutions to Typical Problems

Why link Xiaomi kettle to Yandex Station?

Xiaomi’s smart gadgets are no longer just “toys” — they save time and make life more comfortable. Synchronizing the Mi Smart Kettle kettle (or Viomi, which is also made under the Xiaomi brand) with Yandex Station allows you to control the boiling voice, set a schedule through the app and even receive notifications about the readiness of water. For example, you can say, “Alice, boil the kettle in 10 minutes,” and by your return home the water will be hot.

But it’s not that simple: many users are faced with connection errors, firmware incompatibility or unobvious settings in Mi Home and Yandex Smart Home.This article presents a 2026 connection scheme, taking into account the latest platform updates, as well as analyzing typical “pitfalls” that are not written in the official instructions.

If you have a kettle older than 2021 (e.g. Viomi Smart Kettle V-KETTLE2), check support in Yandex Ecosystem – some models require firmware updates via Mi Home before synchronization.

What Xiaomi kettles are supported?

Not all Xiaomi smart kettles can be connected to Yandex Stations, here is the current list of compatible devices (as of June 2026):

If your model is not in the table, check it on the official website of Yandex Smart Home. Alternative way – try to add a kettle manually through Yandex Smart Home → Add a device → Another and enter it MAC- address (you will find on the sticker under the bottom).

⚠️ Warning: Xiaomi teapots purchased outside Russia may not support Yandex Station due to regional firmware restrictions, in which case you will need to change the region in Mi Home to Russia (instructions in the section on setting up).

Preparing for the connection: what to do in advance

Before synchronizing the kettle with Yandex Station, follow the mandatory steps:

• 🔌 Connect the kettle to the socket and make sure it's switched on with a button on the case. If the indicator isn't on, check the power or reset the settings (press the switch on button for 10 seconds).
• 📱 Install applications: Mi Home (for initial kettle setting) Yandex Smart Home (for sync with Station)
• 🌐 Connect both applications to the same Wi-Fi network. The kettle and Yandex Station should be on the same LAN (e.g., 2.4 GHz, as many smart devices don't run at 5 GHz).
• 🔄 Update the kettle firmware via Mi Home (if an update is available).Outdated versions of the software often cause synchronization errors.

If the kettle has already been connected to another Mi Home account (such as a seller), reset to factory settings:

1. Turn the kettle off the power.
2. Press the switch on button for 15 seconds (before the indicator flashes).
3. Connect to the socket - the kettle will emit an audible signal.

Make sure the kettle is plugged in.

Install Mi Home and Yandex Smart Home

Connect both applications to the same Wi-Fi network

Update the kettle firmware (if there are updates)

Reset the kettle to factory settings (if necessary)-->

Step-by-step: how to connect the kettle with Yandex Station

The connection process consists of three steps: setup in Mi Home, adding an Ecosystem to Yandex, and binding to the Station. Follow the instructions in strict order - skipping steps will lead to errors.

Stage 1: Set up the kettle in Mi Home

1. Open Mi Home and log in (use an account linked to the "Russia" region).
2. Click Add Device (+) → Select Kitchen → Teapot Category.
3. Follow the instructions on the screen: turn the kettle into the socket, wait for the indicator to blink and confirm the connection in the application.
4. After successful addition, go to the kettle settings (Device → Settings (⚙️) and check: Firmware Version (update if available). Region - should be "Russia" (if not, change in your account profile).

Stage 2: Adding a kettle to Yandex Smart Home

1. Open the Yandex Smart Home application.
2. Go to the Devices section → click Add.
3. Select Xiaomi → enter the username and password from your Mi Home account (this is secure – data is not stored on Yandex servers).
4. In the list of devices, find your kettle and confirm the addition.

If the kettle doesn’t appear on the list, try:

• 🔄 Reset the kettle (remove the plug for 30 seconds).
• 📡 Reconnect Wi-Fi to Mi Home (go to kettle settings → Network).
• 🔧 Manually add the device to MAC- address (see on the sticker under the kettle).

Stage 3: Voice control through Yandex Station

After successful synchronization:

1. Tell Yandex Stations, "Alice, find new devices."
2. Wait for confirmation of the kettle's discovery.
3. Check the work of the teams: "Alice, turn on the kettle" "Alice, boil the water in 5 minutes" "Alice, what is the temperature of the water in the kettle?"

💡

If Alice doesn’t recognize the teapot’s name, rename it to Mi Home by a simple word (e.g., “Teapot” instead of “Mi Smart Kettle Pro”), which will make voice commands easier.

Common Mistakes and How to Fix Them

Even with the correct following of the instructions, problems can arise, and here are the most common mistakes and their solutions:

1.The teapot is not in Yandex Smart House

Causes and solutions:

• 🔴 Outdated firmware: Update the kettle software via Mi Home (Device About → Update).
• 🔴 Region Disparity: In Mi Home, go to profile → select Russia region.
• 🔴 Firewall Block: Disable VPN or antivirus on your smartphone while you set up.

2.Yandex Station does not operate the kettle

What to do:

• 🔄 Reboot Yandex Station (pull the cord for 10 seconds).
• 📛 Check that the kettle and the Station are linked to the same Yandex account.
• 🗣 Retrain voice commands: Say "Alice, retrain" and repeat the queries.

3.The kettle is off Wi-Fi

Decisions:

• 📶 Reconnect the kettle to the 2.4 GHz network (many models don't work with 5 GHz).
• 🔌 Check the distance to the router — if the signal is weak, use a repeater.
• ⚡ In the router settings, turn off the Customer Isolation function (it blocks device interaction on the same network).

⚠️ Warning: If the kettle has stopped responding to commands after the firmware update, reset to factory settings (see Preparation) and reconnect from scratch.

Hidden functions: what does a kettle with Yandex Station

Many users use the kettle only for basic boiling, but with Yandex Station, additional features open up:

• ⏰ Boiling Schedule: Set up automatic on weekdays (e.g., 10 minutes before you wake up). To do this, select a kettle at Yandex Smart Home → Schedule → Add.
• 🌡 Temperature control: Not everyone knows that the Mi Smart Kettle Pro supports heating to a predetermined temperature (e.g. 80°C for green tea).
• 🔄 Integration with other devices: Create a scenario where the kettle is switched on simultaneously with the Xiaomi smart lamp on the command "Alice, start the morning."
• 📊 Usage statistics: In Mi Home, you can see how many times a day you boiled water and how much you used (useful for controlling your electricity consumption).

The Viomi V-KETTLE2 offers an "Eco Mode" feature, which keeps the kettle at 80°C for an hour after boiling, and is activated by a voice command: "Alice, turn on the eco mode in the kettle."

💡

Voice control works only with commands in Russian. English queries (for example, "Boil the kettle") are not supported, even if the station's settings are English.

Safety: What you need to know

Smart kettles, like any IoT device, require attention to security.

• 🔒 Account Protection: Use a complex password for Mi Home and Yandex, and enable two-factor authentication. Otherwise, attackers can access the kettle management.
• 📡 Guest Network: Don’t connect the kettle to a guest Wi-Fi network — it can block device interaction.
• 🔌 Network overload: If a kettle socket uses an extension cord with other powerful appliances (e.g., a microwave), this can cause malfunctions in the smart module.

Pay special attention to child safety:

• In the Mi Home settings, you can enable Blocking buttons - this will prevent the child from accidentally turning on the kettle.
• Voice commands can also be limited: in Yandex Smart Home go to Settings → Voice Assistant → Restrictions and add a kettle to the list of protected devices.

⚠️ Warning: If the kettle starts to turn on spontaneously, immediately disconnect it from the network and check: Are there any extraneous devices on your Wi-Fi network (check through the router). Are there unknown scenarios installed in Yandex Smart Home. Update the kettle firmware - old versions had vulnerabilities that allowed remote control.

FAQ: Answers to Frequent Questions