Modern peripherals from Xiaomi, such as compact wireless mice, have gained popularity due to their minimalist design and affordable price. However, the process of their initial activation on Windows 10 computers often raises questions among users accustomed to standard wired solutions. Wireless technologies require proper initialization and accurate adherence to the sequence of actions for stable operation.
The main difficulty is that many models, such as the Mi Portable Mouse or Mi Silent Edition, do not have the usual on button in the classical sense. Instead, it uses a combination of actions with the switching buttons or prolonged key retention. Bluetooth protocol provides wireless communication, but the operating system must correctly recognize the device in the list of available gadgets.
In this guide, we will take a detailed look at all the steps of connection, from removing the protective film to fine-tuning the sensor sensitivity. You will learn how to avoid typical pairing errors and what to do if the laptop can not see the mouse.
⚠️ Warning: Before starting the procedure, make sure that the protective insulation tape is removed from the battery compartment.While the plastic blocks the contact, the mouse will not turn on and go into pairing mode, which often confuses users.
Preparation of equipment and compatibility check
The first step is to physically get the device ready to go, and most Xiaomi models are powered by standard AA or AAA batteries, or have a built-in battery, and you have to open the power compartment on the bottom panel, and make sure that the batteries are properly installed according to the polarity scheme.
Next, check for a built-in Bluetooth module in your laptop. While Windows 10 has excellent wireless interface support, on some older or budget PC models, this module may be missing or disabled in the BIOS. For a quick check, press the Win + I key combination to open system settings.
Make sure the Bluetooth adapter drivers are updated.This is a critical point, as legacy software may not support the modern encryption protocols used in new Xiaomi gadgets.
- 🔋 Remove plastic safety tape from the battery compartment or charge the device via the Micro-USB/Type-C port.
- 💻 Check for an active Bluetooth adapter in Windows 10 Device Manager.
- 📡 Make sure you're within range. 1-2 Meters no powerful sources of interference (Wi-Fi routers, microwave ovens).
- 🔄 Update Bluetooth drivers to the latest version from the laptop manufacturer’s website.
Activation of the pairing mode on the mouse Xiaomi
The most important step is to put the device in visibility mode. Unlike many other brands, Xiaomi often uses combined activation methods. On the bottom of the device there are usually two main buttons: the mode switch (Bluetooth / 2.4G) and the pairing button (Pairing).
To go into search mode, you need to switch the slider to the Bluetooth position (usually indicated by the B symbol or logo). After that, if the indicator does not catch fire, you need to press the connection button. In some models, such as the Mi Silent Edition, you need to simultaneously press the left, right and center buttons for 3-5 seconds.
A status indicator located next to the scroll wheel or on the end should start flashing blue or white. The blinking frequency indicates readiness for connection. If the indicator is constantly on, then the mouse is trying to connect to the previously stored device and the search mode is not active.
Specificity of different Xiaomi models
⚠️ Note: The conjugation mode is active for a limited time (usually) 2-3 If you have a Windows connection during this period 10 If it doesn't, it'll reset, and the light will stop blinking.
Bluetooth settings in the Windows 10 operating system
Now, to the software part of the setup, Windows 10 has a unified wireless connection management center. Open the Start menu and select the gear icon to go to Settings. We're interested in Devices, where you manage the peripherals.
In the window that opens, make sure that the Bluetooth slider is moved to the On position. If the switch is missing or inactive (grey), this indicates a driver problem or a physical shutdown of the module.
To add a new gadget, click "Add Bluetooth or other device." In the window that appears, select the first item "Bluetooth." The computer will start the ether scan. The list should appear devices with names containing Xiaomi, Mi Mouse or Mi Silent.
The way to settings: Start → Settings → Devices → Bluetooth and other devicesThe process of installing drivers in Windows 10 usually goes automatically. HID-Human Interface Device for cursor and buttons to work correctly, and Connected status will appear next to the device name after successful synchronization.
- 🔍 Click “Add Bluetooth or other device” in Windows settings.
- 📡 Select the “Bluetooth” device type to run the scan.
- ✅ Wait for the name of your Xiaomi mouse to appear in the list of found.
☑️ Checking before connection
Connection process and driver installation
Once you select a device in the Windows 10 list, you will start the handshake procedure. A request for code confirmation may appear on the screen, although this is rare for mice. Usually the process takes 5 to 15 seconds, during which time the indicator on the mouse can flash faster or change color.
If the system requests additional software, follow the on-screen instructions. However, in 95% of cases, standard Windows drivers are enough to fully work all the buttons and scroll wheels. Xiaomi's specific software for PC is rare and often only necessary for flashing.
If you have a “failed to add this device” error, try removing the device from the list (if it appears with an error) and try again. Sometimes it helps to reboot the Bluetooth service. To do this, click Win + R, enter services.msc, and find the Bluetooth Support service.
| Status of indicator | Significance of state | User action |
|---|---|---|
| It's not burning. | Battery off or off | Check the power, set the mode |
| Blinks slowly | The pairing mode is active. | Search for a device in Windows |
| It's burning all the time. | Connected to the device | We can work. |
| Blinks fast. | Connection error / Low charge | Recharge or replace the battery |
💡
If the mouse is connected, but the cursor moves in jerks, try turning off the energy saving for the first time. USB-root in Device Manager, as this can affect Bluetooth modules.
Solving common problems and errors
Even if you follow all the instructions, you can have technical difficulties, and one of the common problems is that you can see the mouse on the list, but you can't connect, and this can be caused by a driver conflict or a Bluetooth cache overflow, and you can remove all the old devices and reboot the module.
Another common situation is spontaneous shutdown or “falling asleep” of the device. Windows Power Saving Mode can aggressively turn off power. USB-The hub to which the Bluetooth adapter is attached, and the system must be prevented from turning off the device to save energy.
It’s also worth checking the power settings of the laptop itself. In high performance mode, wireless modules are more stable. If you have a laptop with two graphics adapters, make sure that Bluetooth doesn’t work through the disabled graphics card (relevant for some rare configurations).
⚠️ Note: If the Xiaomi mouse stopped responding after the Windows update, try rolling back the Bluetooth driver to the previous version.New OS updates sometimes contain bugs that disrupt the work HID-device.
Sensitivity setting and additional functions
Many Xiaomi models, such as the Mi Portable Mouse, feature a DPI switch button, usually located on the bottom panel or combined with one of the side buttons. Switching the DPI allows you to adapt the cursor speed for different tasks: high for large monitors, low for accurate graphics.
For more advanced customization, you can use third-party utilities if standard Windows tools are not enough. However, it is worth noting that there is no official software for setting the Xiaomi mouse buttons on Windows, all functions are usually hardware and switched by combinations of buttons.
If you're not actively using your mouse, put it into sleep mode (if you have one), or just turn it off with a switch, which is especially true for models without automatic falling asleep.
💡
Hardware switching DPI and the absence of the need for heavy software make Xiaomi mice ideal for use in conjunction with laptops, where speed and minimal resource consumption are important.