How to Connect Xiaomi Smart Air Fryer to Network and App: Full Guide

Xiaomi Smart Air Fryer is not just a kitchen appliance, but a fully-fledged smart device that can integrate into the Mi Home ecosystem and be controlled from a smartphone. However, many users face difficulties when connecting for the first time: the router does not see the device, the application gives a synchronization error, the voice assistant refuses to recognize the command. In this article, we will analyze all possible connection scenarios, from basic settings via Wi-Fi to integration with Apple HomeKit or Google Assistant, and consider typical errors and how to fix them.

The peculiarity of Xiaomi smart aerogrills is their dual nature: on the one hand, they work as autonomous devices with mechanical control, on the other hand, they require a connection to the network to activate advanced functions (remote start, recipes, temperature monitoring). This means that even if you don’t plan to use smart chips, the initial setup through the app is still necessary to unlock the full functionality. Next, you will find step-by-step instructions for all current models (Smart Air Fryer 3.5L, 4.0L Pro, Compact Edition) taking into account the latest firmware updates in 2026.

1.Preparation for connection: what to check before starting

Before you start setting up, make sure that all components of the system meet the minimum requirements, which will save you 90% of potential problems during the connection phase.

First, check your router’s compatibility. Xiaomi Smart Air Fryer devices only work with 2.4 GHz networks (does not support 5 GHz!) and require Wi-Fi 4 (802.11n) or higher. If your router is broadcasting simultaneously on two frequencies under the same name (SSID), you will have to temporarily disable 5 GHz or create a separate network for 2.4 GHz. Nor will the device connect to guest networks or client-isolated networks (option AP Isolation in the router settings).

• 📶 Wi-Fi frequency: 2.4GHz only (turn off 5GHz at setup time)
• 🔒 Type of encryption: WPA2-PSK (not supported by WPA3, WEP or open networks)
• 📱 Application version: Mi Home at least 6.5.400 (update to App Store/Google Play)
• 🔋 Charge: the aerogrill must be connected to the 220V network (power indicator is lit green)

Second, prepare a Xiaomi account. If you don't have one, sign up in advance at account.xiaomi.com. Device-to-account binding is mandatory for data synchronization and remote management. Please note that if you've previously used Mi devices in another region (e.g., bought AliExpress gadgets with firmware for China), you may need to change your account region in the Mi Home app settings.

⚠️ Warning: If your router uses a dynamic DNS (e.g., ddns.net) or VPN- server, temporarily disable these features. Xiaomi devices may block connection to networks with non-standard DNS- servers due to security policies.

2. Installation and configuration of the Mi Home app

The official Mi Home app (renamed Xiaomi Home in some regions) is the central management hub for all smart devices in the ecosystem, and installing it and setting it up correctly is key to connecting the aerogrill to a successful location.

Download the application from official sources:

• 📱 Android: Google Play (version no lower than 6.5.400)
• 🍎 iOS: App Store (requires iOS 12.0 or later)

After installation, follow the following steps:

1. Open the app and sign in to your Xiaomi account (or create a new one).
2. Select the region "Russia" (or your country) in the profile settings. This is important for the correct operation of synchronization servers.
3. Go to the Devices tab → click Add Device (the + icon in the upper right corner).
4. In the search box, type “Smart Air Fryer” and select your model from the list.

If your model doesn’t appear on the list, update the app or check if the phone’s settings have power saving mode for Mi Home (this may block access to Xiaomi servers).

• 📶 Wi-Fi (even if the connection is via mobile data)
• 📍 Geolocation (required to determine server region)
• 🔄 Autosynchronization of date/time (incorrect time can cause authentication error)

3. Step-by-step connection of aerogrill to Wi-Fi

Now, the most important step is to pair your device with your network, and the process may vary slightly depending on the model, but the overall pattern is the same.

Step 1: Activation of the pairing mode

Connect the aerogrill to the socket and make sure the power indicator is green (if flashing red, the device is discharged or malfunctioning). Press and hold the Wi-Fi button (usually located on the back or under the lid) for 5 seconds until the indicator flashes quickly blue, which means that the device is ready to connect.

Step 2: Selecting a network in an application

In the Mi Home app, when you add your device, select your 2.4GHz Wi-Fi network from the list and enter your password. If the network is not listed, update the list or check if the SSID is hidden in the router settings. Make sure the network name does not have Cyrillic characters or spaces - this can cause an error.

Step 3: Synchronize the device

Once you enter the password, the application will start the synchronization process.

• 🔄 Do not close the app or lock the phone screen.
• 📶 Do not switch to other Wi-Fi networks or mobile data.
• ⏳ The process can take up to 2-3 minutes (on older routers, it takes longer).

If the sync is delayed or has been delayed, try:

Reboot the router (turn off for 30 seconds)

Make sure your phone is connected to the same 2.4GHz network

Repeat the process of pairing with the Wi-Fi button retention for 7-10 seconds

Reset the aerogrill to factory settings (reset button at the bottom of the device)-->

Critical information: If after 3 attempts, the device gives an error "Cannot connect to network", check the settings of the router firewall. Some models (for example, TP-Link Archer C6) block Xiaomi traffic by default. Add MAC- air grill address to the list of exceptions or temporarily disable the firewall.

4.Integration with a smart home: Google Assistant, Apple HomeKit, Alice

Once you successfully connect to Mi Home, you can extend the aerogrill experience by integrating it with other ecosystems, allowing you to control your device via voice or third-party apps.

Connection to Google Assistant:

1. Open the Google Home app on your phone.
2. Click Add → Device → Set up the device.
3. Select Xiaomi from the list of compatible brands and sign in to your Mi Account.
4. Allow access to devices and select Smart Air Fryer from the list.

Connection to Apple HomeKit:

Officially, Xiaomi Smart Air Fryer does not support HomeKit, but there is a workaround through the Home Assistant app (requires a separate server, for example, on the Raspberry Pi).

Connection to Yandex Alice:

For this:

1. Open the Yandex application → Devices → Add the device.
2. Choose Xiaomi and log in.
3. In the list of devices, find the aerogrill and confirm synchronization.

⚠️ Warning: When integrating with Google Assistant or Alice, some users are faced with the problem of "device duplication." This happens if the aerogrill was previously linked to another account. To fix, remove the device from all ecosystems, reset it through the Reset button and reset it from scratch.

5. Set up notifications and automation

One of the key features of a smart aerogril is the ability to create automatic scripts and receive notifications about the status of cooking, for example, you can set an alert on your phone when the dish is ready, or run an aerogril on a timer.

How to set up notifications:

1. In the Mi Home app, select your aerogrill.
2. Go to the device settings → Notifications.
3. Enable the options: 🔔 "Preparedness of the dish" (audible signal + push) ⚠️ "Overheating Warning" ⏳ "Prewarming Reminder"

Creating automation:

For example, to turn on the aerogrill every day at 18:00:

1. In Mi Home, go to the Automation tab → Add.
2. Select the time trigger and set 18:00.
3. Add action: select aerogrill → Enable → Specify mode (for example, "Chicken wings").
4. Save the script.

💡

If you have multiple Xiaomi smart devices (like an aerogrill and a robot vacuum cleaner), create a Clean + Dinner scenario: the vacuum cleaner starts at 17:00 and the aerogrill starts at 17:45, eliminating the need to manually control the process.

You can also configure conditional scenarios, such as launching an aerogrill when you return home (by geolocation of the phone) or when the temperature changes in the room (if you have a Xiaomi Temperature & Humidity Sensor sensor).

Typical errors and their solutions

Even with the right instructions, there can be failures, and we've collected some of the most common errors and ways to fix them.

If none of the methods helped, try resetting the device to factory settings:

1. Disconnect the air grill from the network.
2. Press and hold the Reset button (usually located at the bottom of the device next to the network cord).
3. Without releasing the button, connect the device to the network and hold for another 10 seconds until the indicator flashes yellow.
4. Release the button and repeat the connection process from scratch.

7. firmware update and new features

The manufacturer regularly releases firmware updates for the Smart Air Fryer, adding new cooking modes, improving connection stability and fixing bugs.

1. Open the Mi Home app and select your aerogrill.
2. Go to the device settings → Update the firmware.
3. If a new version is available, click Update and wait for the process to complete (don’t disconnect your device from the network!).

💡

To extend the life of the heating element, run the "Self-cleaning" mode every 3 months (if you have one in your model) or warm up the device at a maximum temperature of 10 minutes without food.

FAQ: Frequent questions about Xiaomi Smart Air Fryer