How to Clean Xiaomi Wireless Vacuum Cleaner: The Complete Guide

Regular maintenance of Xiaomi vacuum cleaner is not just a matter of hygiene, but also a critical procedure for maintaining high suction power. Many owners of wireless models such as the Mi Vacuum Cleaner G10 or Roborock H7 face reduced cleaning efficiency after a few months of operation, unaware that the problem lies in clogged filters.

The brand’s current devices are built on cyclone technology, which requires free passage of air currents. If you ignore the need to clean, the engine can overheat and battery life will be significantly reduced due to increased air resistance.

In this article, we will discuss a detailed algorithm of actions that will help restore the factory traction of your device, you will learn which nodes require weekly attention, and which are enough to maintain every six months, so that the equipment lasts for years without losing performance.

Preparation for maintenance and security measures

Before any manipulations are initiated, make sure that the device is completely disconnected from the charging station. Although most modern Xiaomi models have short-circuit protection, removing the battery or disassembling the electrical circuits under voltage can lead to irreversible consequences.

It is recommended to clean in a well-ventilated room, preferably above the sink or pelvis, as when removing the container often raises a cloud of fine dust.

⚠️ Warning: Never try to wash the vacuum cleaner itself or the engine block with water. The moisture protection only applies to certain nodes, and getting liquid on the engine will cause breakage.

It is important to prepare a dry towel or wipes to wipe the interior surfaces. Make sure you have access to running water if you plan to wet the filter elements. Safety in the maintenance process comes first.

Dismantling and cleaning of the dust collector

The first step is to extract the main garbage container, and depending on the model, whether it's a Jimmy JV51 or a flagship Dreame V12, the locking mechanism may be different, but the principle is the same: press the unlock button and smoothly pull the flask.

Empty the contents in the bin. If animal hair or hair is stuck inside, it should be removed mechanically. Many users make the mistake of simply shaking the dust out, but static electricity often keeps fine debris on the walls of the plastic.

Wash the plastic container with warm water. You can use a mild detergent, but it is important to thoroughly wash away its residues. Clean plastic prevents the spread of unpleasant odor that can occur when the engine is heated while operating.

💡

Wipe the inside walls of the container with a dry cloth after washing to remove the static charge that will attract dust again.

Pay special attention to the inlet through which air enters the engine, which often accumulates a dense layer of dust that covers the channel, use a dry brush or cotton swab to remove contaminants from hard-to-reach areas.

Washing and drying HEPA-filter

The most important element of the filtering system is HEPA-It traps microscopic particles, allergens and bacteria, keeping the air blown clean. In Xiaomi wireless vacuum cleaners, it is usually located at the top of the container or in a separate compartment next to the engine.

Carefully remove the filter from the case. Visually assess its condition: if the gray paper is blackened or gray, cleaning is mandatory. Wash the filter under a stream of cold water until the draining liquid becomes clear.

⚠️ Attention: It is strictly forbidden to use hot water, brushes or detergents for washing HEPA-It'll destroy the microscopic fibers, and the filter will lose its properties.

After washing, the filter must be thoroughly dried, a process that takes 12 to 24 hours depending on the humidity of the air, and installing a wet filter inside the device will cause moisture to enter the motor and mold to appear.

💡

Change or wash HEPA-filter is required for every 3-6 months, otherwise the load on the engine will increase significantly.

While the main filter is drying, you can wipe the installation compartment with a wet wipe, make sure there are no debris left that could have slipped past the cyclone, and replacing or cleaning this element regularly is the key to the long life of your Smart Vacuum.

Maintenance of cyclone filter and separator

Inside the dust collector, there's a cone-shaped element called a cyclone filter, which is designed to twist the airflow to separate the large dust by centrifugal force, and the ribs of this element often form dense layers.

To clean, use a soft brush or a dry toothbrush. Walk carefully through all the faces, removing plaque. If the contamination is severe, the element can be washed with water, but before assembly it must be completely dry.

Notice the grid, which is often above the cyclone, which protects the engine from large objects, and clean the grid cells of hair and thread using tweezers or needles if necessary.

Check the sealing gums at the joints of the container. If they are contaminated, the system leaks, and some of the dust can seep back into the air or into the engine.

Brushing the main brush and hair removal

An electric brush (turbobrush) is a working organ that comes into direct contact with the floor, and the hair, wool and threads are wound on the shaft, which creates resistance and can cause the belt to break or the brush engine to break.

Remove the cover of the brush compartment, which is usually fixed by latches or screws (in some Xiaomi models, the screws are hidden under rubber plugs). Remove the shaft with the pile out.

Use scissors or a special blade (often included) to cut a dense layer of coiled hair along the shaft. After that, remove the winding with your hands. Clean the remains of the pile with a brush.

• 🧹 Check the bearings on the ends of the shaft for the absence of wound hair.
• 🔧 Lubricate bearings with silicone lubrication once every six months for silent operation.
• 👀 Check the brush pile: if it has worn or become too soft, it is better to replace it.

Remember to clean the shaft compartment, which can also accumulate debris that interferes with free rotation, and wipe the insides with dry cloth.

Diagnostics of air ducts and engine

After cleaning the main parts, you should check the air ducts, take a flashlight and look into the channel connecting the container to the engine. There should be no obstruction.

Pay special attention to the engine compartment's air entry area, if a large fraction of debris gets there, it can damage the turbine impeller, visually inspect the blades through the safety net.

If you hear a whistle or a change in the tone of the engine, it's a sure sign of a disruption in the aerodynamics inside the body, most often due to a loosely closed filter or debris in the channel.

Regular inspection of these components avoids costly repairs. The engine in Xiaomi vacuum cleaners is highly revved and sensitive to overheating, which is often caused by pollution of the ventilation system.

Assembly and testing of the device

Once all the components are completely dry and cleaned, you can start the assembly. Insert filters and containers until the characteristic click. A loose landing can cause air whistles and loss of power.

Turn on the device and listen to the engine. The sound should be smooth, without any foreign vibrations. Check the traction with your hand against the inlet.

If the vacuum cleaner is paired with the Mi Home app, check the status of filters in the device menu. Some models allow you to reset the filter resource meter after it is replaced or cleaned through the Settings → Device Care menu.

⚠️ Warning: If the vacuum cleaner makes a loud whistle after assembly, turn it off immediately, which means that one of the filters is installed incorrectly or the seal is damaged.

Xiaomi’s properly assembled and maintained wireless vacuum cleaner works like new, regularity of procedures is more important than complexity: it’s better to spend 5 minutes each week than an hour resuscitating equipment once a year.