How to correctly transfer the robot vacuum cleaner Xiaomi to sleep mode: all ways

Why Xiaomi robot vacuum cleaner is not sleeping: the main reasons

Xiaomi’s robot vacuum cleaners (including the Mi Robot Vacuum, Dreame and Viomi models) automatically go to sleep after cleaning is completed or prolonged inactivity. However, sometimes the device continues to work in active mode, draining the battery and creating background noise.

First, incorrect power saving settings in the Mi Home/Dreame app, such as a disabled Sleep Mode or too short an inactivity timeout; second, hardware failures: sensor freezes, problems with the docking station or mechanical wheel locks; and finally, software errors after updating the firmware or resetting settings.

If your vacuum cleaner doesn't go into sleep on its own, don't rush to bring it to the service. In 90% of cases, the problem is solved manually - and then we'll sort out all the working methods.

Method 1: Sleeping through physical buttons

The most reliable method is to use mechanical buttons on the device body, which works even when Wi-Fi crashes or the application is disabled.

1. Find the power button (usually located on the top panel next to the indicators). On Xiaomi Mi Robot Vacuum-Mop 2 Pro models, this is a round button with a symbol ⊙.
2. Hold it for 3-5 seconds until you hear a beep (one short beep). 🌙 sleep.
3. Release the button – the vacuum cleaner will start the shutdown process (can take up to 20 seconds).

⚠️ Note: Some models (e.g. Dreame) D9) A short press turns the cleaning on/off, and a long press puts it into sleep mode!

Make sure the vacuum cleaner is not on charge (unplug from the docking station)

Check that there are no active cleaning tasks in the app

Remove garbage from the container (a crowded tank can block the shutdown)

Turn off the Cleanup Zone or Memory Card function (if enabled)-->

Method 2: Use of the Mi app Home/Dreame

The software method is convenient for remote control. Suitable for all models connected to the Mi Home (for example, Xiaomi Mi Robot Vacuum-Mop P) or Dreame (D9, D10, Z10 Pro series).

1. Open the app and select your vacuum cleaner from the list of devices.
2. Go to the Management section (or Main in English).
3. Click on the icon. ⋯ (three dots in the upper right corner and select Sleep Mode).
4. Confirm the action - the vacuum cleaner will emit an audible signal and begin to shut down.

If the item Sleep mode is not on the menu, try an alternative way:

Device profile → Settings → Working modes → Sleep mode

💡 Useful tip: Some firmwares have a sleep mode hidden behind the Power Saving option, turn it on and the vacuum cleaner will automatically fall asleep after 10 minutes of inactivity.

Xiaomi Mi Robot|Dreame|Viomi|Roborock|Other-->

Method 3: Voice commands (Alice, Google Assistant, Siri)

If your vacuum cleaner supports integration with voice assistants (for example, through Mi Home or Yandex Smart Home), you can use voice commands. This works for models with firmware at least 3.5.8 and a connected Xiaomi account.

Examples of teams:

• 🎤 Alice: “OK Google, tell Mi Robot to go to sleep” (if connected via Google Home).
• 🎤 Yandex: Alice, turn on the sleep mode for the vacuum cleaner».
• 🎤 Siri: "Hey Siri, set Xiaomi vacuum to sleep mode" (Requires settings via HomeKit).

⚠️ Attention: Voice commands may not work if the vacuum cleaner is currently cleaning or charging. First, stop the current task through the app.

Method 4: Automatically go to sleep (timer setting)

To make the vacuum cleaner sleep on its own, adjust the energy saving settings, which will eliminate the need for manual shutdown.

1. Open the device card and go to Settings → Schedule and Automation.
2. Choose Power Management (Energy Management).
3. Set the Auto-Switch option to 5 minutes to 1 hour (15 minutes is recommended).
4. Save the settings - the vacuum cleaner will fall asleep after the specified time of inactivity.

For Dreame models, the path is different:

Settings → Additional → Power Modes → Sleep Timer

💡

Automatic sleep saves up to 30% of battery life per month if the vacuum cleaner is not used daily.

Method 5: Forced shutdown through the docking station

If the vacuum cleaner doesn't respond to commands but returns to base successfully, you can use the docking station to force you to go to sleep, which works for all models with automatic charging.

Algorithm of action:

1. Make sure the docking station is connected to the network and is within range of the vacuum cleaner.
2. Manually place the vacuum cleaner on the base (or give the command to return to charging through the application).
3. After charging, hold the power button on the vacuum cleaner for 10 seconds - this will lead to a forced shutdown.
4. After 5-10 seconds, the vacuum cleaner will go into sleep mode (indicators will go out).

🔋 If the dock lights flash red after this procedure, the battery is under 10% discharged. Connect the vacuum cleaner to the network for 1-2 hours before reuse.

What to do if the vacuum cleaner does not go into sleep mode?

If neither method worked, the problem could be hardware or software.

• 🔄 Reset the vacuum: Hold the power button for 15 seconds until double signal. this will reset the temporary errors.
• 📱 Update the firmware: In the Mi Home app, check for updates in the Settings section → Update of the PO.
• 🔌 Check the docking station: Clear the contacts of dust, make sure the cable is not damaged.
• 🛠️ Reset settings: In extreme cases, reset to factory parameters (see the instructions for your model).

If the problem persists, contact the service center.

• Malfunction of the motherboard (symptom: vacuum cleaner does not respond to buttons).
• Damage to the battery (symptom: fast discharge, no charging).
• Motor jamming (symptom: humming without movement).

💡

Before contacting the service, record a video demonstrating the problem - this will speed up the diagnosis and help avoid unnecessary costs for replacing serviceable parts.

FAQ: Frequent questions about the sleep mode of the robot vacuum cleaner Xiaomi