Managing smart appliances in the home requires a clear understanding of the logic of the devices, and Xiaomi’s cleaning robots are no exception. Many users face a situation where you need to completely stop working the device, but the standard button on the case does not give the desired result or raises questions.
In this guide, we’ll look at all the possible ways to stop a robot vacuum cleaner, from simply turning off the robot to locking the interface and turning off voice notifications, and understanding these processes will allow you to effectively manage cleaning and extend battery life.
There are several scenarios that require a complete shutdown: a long-term storage, a need for quiet operation, or simply a desire to save power, and we will look at each of them in detail so that you do not have any questions.
Physical shutdown and power button management
The most obvious way to stop the Xiaomi Vacuum Mop is to use a physical power button located on the top of the case, but the algorithm for this button may vary depending on the model and firmware version.
In most cases, a short press puts the device in standby mode, but does not turn it off completely.To completely turn off the power system, it is often necessary to hold the button for 3-5 seconds until the indicators go out.
⚠️ Warning: If you plan not to use the robot vacuum cleaner for more than two weeks, it is recommended to completely turn it off with a button and disconnect it from the charging station to avoid deep battery discharge.
Some models, such as the Xiaomi Robot Vacuum E10 or Mijia 1C, may not have a separate shutdown button on the case, in which case the device goes to sleep automatically after cleaning or returning to base.
Stop cleaning and return to base
If your goal is not to turn off the power supply completely, but to stop the current cleaning, then the logic of the navigation system comes into effect. Simply pressing the home button may not be enough if the device is confused with the algorithms of mapping.
To force the cleaning process to stop, press and hold the base return button (usually marked by a house) for 2 seconds, which interrupts the current cycle of work and sends the command to immediately return to the dock.
- 🏠 Press the Home button once for a regular return.
- 🛑 Hold the 2 seconds button for emergency stop and return.
- 📱 Use the Mi Home app to remotely stop anywhere in the apartment.
- 🔋 Make sure the path to the base is clear, otherwise the robot may stop in the middle of the path.
💡
If the robot vacuum cleaner is stuck or can’t find the base, it’s best to turn it off with the power button, move it manually to the base and only then turn it on again.
Blocking buttons and protection from children
One of the common reasons users are looking for a way to "disable" the robot is for children or pets to accidentally turn on the device, and pressing any button on the control panel can trigger the cleaning process at the most inopportune moment.
To solve this problem, the system has a lock mode of the control panel, which can be activated by simultaneously holding two buttons: usually the buttons "Home" and "On / Off" (or "Local cleaning", depending on the model), holding for 3 seconds activates protection.
| Model robot. | Button combination | Indication | Method of unlocking |
|---|---|---|---|
| Xiaomi Vacuum Mop Essential | Home + Food | Blinking of the indicator | Retention |
| Mijia 1C | Home + Local | Sound signal | Through the app |
| Roborock S5 | Home + Point | Voice message | 3 sec. |
| Xiaomi S10+ | Long press of "Home" | Screen locking | Through the settings menu |
Once the lock is activated, all physical buttons on the body stop responding to touch, and the only way to control it is the Mi Home mobile app, which gives you full control of the device.
☑️ Checking child protection
Disabling voice tracking
Many users are annoyed by the loud voice accompaniment of the robot's actions, especially if there are children sleeping in the house or people who are sensitive to noise.
The easiest way is to use a mobile app. Go to your device settings, find the "Voice settings" or "Loudness" section, and slider to minimize or select "No Sound" mode.
There is also a method of "jamming" through the physical overlap of the speaker, but we strongly recommend not opening the case, as this will deprive you of warranty. It is better to use software methods or paste a small piece of porous material on the speaker hole, if the model allows you to do this without disassembly.
⚠️ Warning: A complete voice shutdown can make it difficult to diagnose errors, as you won't hear fault codes (e.g., "Stuck Wheel" or "Clean the main sensor").
In some models, such as the Xiaomi Vacuum-Mop 2 Pro, you can choose a voice language.Switching to a language you don't understand sometimes helps psychologically ignore the device, even though technically the sound remains.
The secret method of turning off the sound
Scheduling and automation management
Often, by "switching off," users mean not allowing automatic start-ups on a schedule, so if your robot vacuum cleaner starts cleaning while you're not at home, or vice versa, when you're asleep, you need to set up a launch timer.
To do this, open the Mi Home app, select your device, and go to the "Timer" or "Schedule" section. Here you can:
- 📅 Completely remove all existing schedules.
- ⏰ Change the cleaning start time to more convenient.
- 🚫 Turn off specific days of the week, leaving cleaning only on weekends.
- 🔕 Activate Do Not Disturb mode if this function is supported by the model.
It's also worth checking out automation scenarios. If you have other Xiaomi smart devices, the robot could have been included in a "Gone Out of Home" or "Lights On," which triggers it to run.
💡
Turning off the schedule in the app doesn't turn off the robot itself, it just prevents it from starting automatically. Use the power button to stop completely.
Resetting and restarting the system
If the robot vacuum cleaner is behaving incorrectly, hanging or not responding to commands, it may require a hard reboot or factory reset, a last resort that helps eliminate software errors in the device's operating system.
For a soft reboot, you just need to turn off the device, wait 10-15 seconds, and turn it on again. To reset the Wi-Fi module (to reconnect it to the new network), you usually need to simultaneously press the Home and Power buttons for 5-7 seconds before the voice message about the pairing mode appears.
Full reset is done through the app in General settings → Settings reset. After this procedure, the robot will forget all the maps of the premises, schedules and connections, returning to the out-of-the-box state.