How to turn off the vacuum cleaner Xiaomi: 5 proven ways

Xiaomi’s robot vacuum cleaners have become an integral part of the smart home, but even with such advanced devices, questions sometimes arise about basic control. One of the most common is how to turn off the device correctly so as not to damage the battery or electronic components. It would seem that it could be easier? But in practice, users face nuances: some models require holding a button, others turn off through the application, and still others do not have a physical power button at all.

In this article, we’ll look at all the possible ways to turn off Xiaomi vacuum cleaners (including the Dreame and Viomi sub-brands), pay attention to emergency situations, and explain why some methods can shorten the life of the device, and learn how to set up automatic shutdown after cleaning and what to do if the vacuum cleaner does not respond to commands. Information is relevant for models from 2020 to 2026, but most tips will be suitable for earlier versions.

1. Standard switch off button on the body

The most obvious way is to use a physical button on the body, but even here there are pitfalls. Most Xiaomi Mi Robot models (such as the Mi Robot Vacuum-Mop 2 Pro or Mi Robot Vacuum-Mop P) have a power button combined with a clean-up start button to turn off the vacuum cleaner:

1. Find the button on the top panel (usually with a circle or line pictogram).
2. Hold it for 3-5 seconds until the sound or the indicator goes out.
3. Some models (such as the Dreame D9) require a double press with a pause of less than 1 second.

⚠️ Attention: Don't confuse shutdown with pause! A brief press (less than 2 seconds) usually stops cleaning, but doesn't turn off power. This is important if you plan to keep the vacuum cleaner for a long time - in pause mode, the battery continues to run out.

On models without a physical button (such as the Xiaomi Mi Robot Vacuum X10+), the standard shutdown is only possible through the Mi Home or Dreamehome app, which is designed to protect against accidental shutdown during cleaning, but creates inconvenience if you need to stop work urgently.

2.Switch off via Mi Home/Dreamehome app

Software disabling is the safest way to save your current settings and cleaning history, and the instructions are relevant for the Mi Home (for Xiaomi/Viomi) and Dreamehome (for Dreame):

• 📱 Open the app and select your vacuum cleaner in the list of devices.
• 🔄 On the main screen of the device, find the Turn off button (usually in the lower right corner).
• ⚙️ Alternative path: Settings → Nutrition management → Turn it off.
• 🔋 For models with a docking station (for example, DreameBot) L10 Pro) option Return to base and shut down.

⚠️ Note: If the vacuum cleaner is connected to Apple HomeKit or Google Assistant, shutting down via third-party platforms may not work due to restrictions API. In this case, use the original Xiaomi app.

Make sure the vacuum cleaner does not clean.

Check the stability of the Internet connection

Close background applications that can block commands

Update the vacuum cleaner firmware (if available)

-->

On some firmware, after being turned off through the app, the vacuum cleaner can automatically turn on again when connected to the docking station. This is due to setting Auto Update or Standby Mode to disable this feature:

1. Go to Settings → Schedule → Automatic Enablement.
2. Turn off the option to turn on when connecting to the base.
3. Save the changes and turn off the vacuum cleaner again.

3.Voice control: "OK, Google" and Alice

Xiaomi vacuum cleaners with voice assistants (Google Assistant, Alice from Yandex, Siri) can be turned off by teams. This is convenient if the device is out of access zone or you are busy with other things.

• 🎤 For Google Assistant, use the command: OK Google, turn off [name of vacuum cleaner]".
• 🗣️ Alice: Alice, tell Mi Home to turn off the vacuum cleaner".
• 🍎 For Siri (via HomeKit): Hi Siri, turn off DreameBot".

Important: voice commands only work if the vacuum cleaner is connected to the same account as the voice assistant and has an active Internet connection, and if the network fails, the team may not work, and the vacuum cleaner will continue cleaning.

To check if your model supports voice control:

1. Open the Mi Home app.
2. Select a vacuum cleaner and go to Settings → Voice Assistant.
3. Activate the necessary services (Google, Yandex, Apple).

Google Assistant|Alice from Yandex|Siri (Apple HomeKit)|I don't use voice control.|Other-->

If the voice command does not work:

• Check if the microphone on the smartphone/column is turned on.
• Make sure the vacuum cleaner is not in Do Not Disturb mode.
• Update the vacuum cleaner firmware and voice assistant apps.

Emergency shutdown: when the vacuum cleaner does not respond

Situations where the vacuum cleaner freezes, doesn't respond to commands, or behaves inappropriately (for example, constantly spinning in one place) require emergency measures.

• 🔌 Disconnect from the docking station: if the vacuum cleaner is connected to the base, remove it and flip it over. On the bottom panel of some models (Dreame). Z10 Pro) there is a Reset button - press it with a pin.
• 🔋 Battery Removal: Suitable for models with removable battery (e.g. Viomi) V2). Unscrew 4 screws on the bottom cover, disconnect the battery connector for 10 seconds.
• ⚡ Reset via charger: connect the vacuum cleaner to charge, hold the power button for 10-15 seconds until the indicator flashes.

⚠️ Warning: Forced power outages (removing the battery or disconnecting the socket) may cause firmware to fail. After such a reset, the vacuum cleaner may require reconfiguring the Wi-Fi or updating the software. Always try to use software methods first!

1. condition of the brushes and wheels (contaminants can block the sensors).

2. firmware version (update through the app).

3. Cleaning areas settings (a map that is too complex can cause crashes).-->

For models with built-in battery (such as Xiaomi Mi Robot Vacuum-Mop 2 Pro), the only way to emergency shutdown is to hold the power button for 20-30 seconds. If this does not help, contact the service center, as the problem may be in the power controller.

5. Set up automatic shutdown

To turn off the vacuum cleaner on its own after cleaning or after a certain time of inactivity, adjust the appropriate parameters in the application:

• ⏱️ Turning off after cleaning: Settings → Nutrition management → Turn off after cleaning is completed.
• 🌙 Sleep mode: Settings → Energy conservation → Time of transition to sleep mode (recommended 1-2 hours).
• 🔄 Auto Update: Turn off Automatically Enable for Updates if you don’t want the vacuum cleaner to activate itself at night.

On models with a docking station (DreameBot L10 Pro, Xiaomi X10+), the option to turn off when you return to base is available. This is useful if you want the vacuum cleaner to completely turn off after each cleaning, saving battery power.

💡

Automatic shutdown extends the battery life, as it prevents a constant discharge in standby mode.

If your model doesn't support automatic shutdown, you can use smart outlets (such as the Xiaomi Mi Smart Plug) to connect the dock to the outlet and set up a nighttime power out schedule, which simulates a vacuum cleaner shutdown completely.

6. Frequent mistakes and how to avoid them

Many users make mistakes when turning off the vacuum cleaner, which leads to shorter service life or failures.

• 🔋 Pulling the plug of the docking station: this is equivalent to a forced power outage and can damage the firmware. Always use a button or an app.
• 📵 Ignoring updates: outdated firmware can cause freezes that keep the vacuum cleaner from turning off.
• 🌡️ Storage on: If the vacuum cleaner is idle for more than a week, turn it off completely to avoid battery drainage to a critical level.
• 🔄 Frequent forced reboots: this is a temporary solution. If the vacuum cleaner freezes regularly, contact the service.

⚠️ Note: On models with LiDAR sensors (e.g. Dreame) D9 Max) abrupt power outages can cause calibration failures. After such an incident, the vacuum cleaner can "lose" in space or build incorrect maps. Recovery will require recalibration through the application (Settings) → Additionally. → LiDAR calibration).

If the vacuum cleaner does not turn on again after turning off, try:

1. Connect it to the docking station for 10-15 minutes.
2. Hold the power button for 10 seconds (reset).
3. Check if the Children's Lock is activated (on some models it blocks all buttons).

7. Features of the shutdown for different models

Each brand and model has its own nuances. Below is a brief guide to popular vacuum cleaners Xiaomi:

Viomi models (e.g. Viomi V2 Pro) feature Eco Mode, which automatically turns off the vacuum cleaner when the charge level is low (less than 10%) to turn it off:

1. Go to Settings. → Energy conservation.
2. Turn off Eco Mode option at low charge.

On Dreame vacuum cleaners with self-washing base function (for example, DreameBot X30 Ultra), shutting down via the application can take up to 30 seconds - the device first completes the brush cleaning cycle.

FAQ: Answers to Frequent Questions