Xiaomi’s modern smart appliances are famous for their functionality, but sometimes users are faced with a situation where their new assistant is stubbornly silent. If your robot vacuum cleaner Xiaomi Vacuum or Roborock stopped voiced cleaning statuses or speaks in an incomprehensible language, this is easy to fix with software methods. In most cases, the device does not require complex repairs, but only the correct settings in the mobile application.
The main reason for the gadget's "mutness" lies in the choice of region when it was originally installed or in the specifics of the firmware. The voice package may simply not load or be set to a minimum volume. We will analyze all possible scenarios, from basic activation of the sound to changing the language from Chinese to Russian or English, so that your smart home has a voice again.
Before you go to complex manipulations, it is worth checking the basic settings. Often users accidentally turn off audio notifications in a hurry, and then forget about it. You can return the device to announce the start of cleaning or the end of charging in a few minutes using the standard interface of the Mi Home application.
Basic volume setting in the Mi Home app
The first step to recover your voice is to check the volume level in the main control menu. Open the Mi Home app on your smartphone and select your vacuum cleaner card. The top right corner usually has a three-point button or setting icon that will give you access to the device's technical settings.
In the menu that opens, you need to find the item that controls the sound. Depending on the model and the firmware version, it can be called "Loudness," "Voice Volume" or "Sound Effects." The adjuster should be set to the middle or maximum position. If it is moved to zero, the robot will execute all the commands silently, which is often perceived by users as a break in the speaker.
⚠️ Warning: Make sure your smartphone is connected to the same Wi-Fi network as the vacuum cleaner.The change in audio settings is in real time, and if the device is offline, the command may not execute immediately.
Some models, such as the Xiaomi Vacuum Mop 2 or Roborock S7, have separate settings for voice volume and system volume. Check both settings to make sure the device is heard fully. After making changes, try starting a cleanup or pressing the return button on base to check the result.
Changing the language of the voice packet
One of the most common problems is when the vacuum cleaner "speaks" in a language that the user does not understand, which happens if the device is tied to the "China" region and the default Chinese voice package is installed. Fortunately, most modern Xiaomi and Roborock models have the ability to change the language without flashing.
To change the language, go to the device settings in the Mi Home app. Find the Voice Pack or Voice Pack section. Here you will see a list of available languages. If the language you want isn't on the list, click Download or Download to download it from the cloud. It takes a little time and requires a stable Internet connection.
- 🇷🇺 Russian language: provides complete localization of all statuses and errors.
- 🇺🇸 English: standard international package, frequently updated by developers.
- 🇨🇳 Chinese: Original language, can be useful for error code diagnosis.
- 🇪🇸 Spanish and Others: Available for Global Devices.
It is important to understand that changing the language affects not only voice messages, but also text notifications in the application. After installing a new voice packet, it is recommended to restart the vacuum cleaner by turning it off and on through the power button or disconnecting it from the network so that the changes are applied correctly.
What if the Russian language is not on the list?
Set up notifications and events
Even if the volume is turned to maximum, the vacuum cleaner can be silent during certain events. In the application settings, there is a detailed control over when the robot should make sounds, this is done so that the device does not disturb users in the middle of the night or while watching a movie.
In the settings section, look for "Notifications" or "Notification Settings," where you can flexibly adjust your device's response to different situations, such as leaving a voice greeting at start, but turning off the beep when cleaning is done, which is especially true for owners of models with a silent cleaning function.
Note the following parameters, which are often hidden in the submenu:
- 🔊 Starting voice: announces start of work.
- 🏁 Voice at completion: reports the end of the cycle.
- ⚠️ Error sounds: critical for diagnosing getting stuck or lifting.
- 🔋 Charging: Notification of return to base.
Some advanced users prefer to turn off all sounds except alarms, relying solely on push notifications on a smartphone. However, voice feedback remains the fastest way to understand the state of a device without taking the phone out of your pocket.
☑️ Verification of sound settings
Diagnostics of speakers and hardware problems
If the software settings are fine but still no sound, it may be the hardware that's the problem. The speaker in Xiaomi's robot vacuum cleaners is a small but important component that can fail due to moisture, dust or mechanical impact. It's worth doing a self-diagnosis before going to the service center.
The first thing you need to do is run the speaker test if this feature is available in your firmware version. Often the test mode is triggered by a combination of buttons on the case. For example, simultaneously pressing the Home and Power buttons for 5-10 seconds can trigger a diagnostic mode in which the device must pronounce the test phrase.
| Symptoms. | Possible cause | Method of decision |
|---|---|---|
| Total lack of sound | Disabled sound in the software or burnt the speaker | Volume settings check, dyname test |
| Crackling or wheezing | Dust entering the speaker | Careful purge, cleaning the netting |
| He speaks only Chinese. | Wrong region or language | Change the voice packet in Mi Home |
| The sound is interrupted. | Bad plume contact | Disassembly and check of the connector |
If you notice crackling or distortion of sound, it may indicate that fine dust or animal hair has entered the body, a diffuser-clogged speaker, in which case careful purging of compressed air through the protective net can help, but you should do this with care so as not to damage the membrane.
💡
If the vacuum cleaner is making a quiet crackle instead of a voice, try starting and stopping cleaning several times – sometimes it helps to shake off the dust from the speaker membrane.
Resetting and reconnecting
In cases where software failures block the audio module, a complete reset of the device settings is an effective method, which will return the vacuum cleaner to factory settings by removing all user configurations, including cached errors in the software.
To perform the reset, look for a Reset button on the vacuum cleaner body, which is usually hidden under a protective cover or requires two buttons to be pressed simultaneously. Hold the button for 10-15 seconds until the Wi-Fi indicator flashes orange, and then add the device again to the Mi Home app.
The reconnection process is as follows:
- Remove the device from the list in the Mi Home app.
- Reset the settings on the vacuum cleaner body.
- Press "+" in the app to add a new device.
- Follow the instructions on the screen to connect to Wi-Fi.
- When setting up initially, make sure the right region is selected.
Once the connection is successful, check if the voice appears. If the problem persists due to a software glitch in the configuration file, this method should fix it. However, if the vacuum cleaner is silent after the discharge, the likelihood of hardware malfunction increases.
💡
Full reset often solves problems with the voice module hanging when a simple reboot does not help.