How to set up a Xiaomi Mi Robot Vacuum Mop via the Mi Home app: the full guide

Xiaomi Mi Robot Vacuum Mop is a smart device that makes cleaning your home much easier. However, without the right setup through the official Mi Home app, you won’t be able to use all of its features, from mapping a room to fine-tuning cleaning modes. In this article, we’ll detail how to connect a vacuum cleaner to an app, adjust basic and advanced settings, and solve typical user problems.

The Mi Robot Vacuum Mop features wet cleaning and laser navigation support for LDS, which allows the device to accurately map the room, but to make these functions work correctly, you need to take several steps from initial synchronization to calibrating the sensors, and we'll look at the process of tweaking by step, taking into account the latest firmware and interface updates to the Mi Home app.

Preparing for the connection: what to do before setting up

Before you start setting up, make sure you have everything you need:

• 📱 Smartphone on Android 6.0+ or iOS 10.0+ with Mi Home installed (you can download it from Google Play or App Store).
• 🔋 Xiaomi Mi Robot Vacuum Mop with a battery charge of at least 20% (it is better to charge fully before the first setup).
• 📶 Stable 2.4GHz Wi-Fi connection (the robot doesn't support 5GHz!) The password must be in Latin.
• 🏠 Free space around the docking station (at least 0.5 m on each side and 1 m in front).

If you’ve just unpacked the vacuum cleaner, don’t rush to turn it on right away. First, check the package: the box should have a dock, power supply, water tank, wet wipe and spare side brushes. Also note the serial number (located on the bottom of the device or in documents) – it may be necessary to link to a Xiaomi account.

⚠️ Note: If your router only works in the 5GHz band, create a separate 2.4GHz network in its settings. To do this, go to the router control panel (usually at 192.168.0.1 or 192.168.1.1) and activate compatibility mode.

Important point: before connecting, make sure that your smartphone is enabled Bluetooth and geolocation (necessary for finding the device), also disable VPN or proxy – they can block the connection to Xiaomi servers.

Installation and configuration of the Mi Home application

The Mi Home app is the central tool for managing all Xiaomi devices, and if you don't already have one, download it and install it from the official store.

1. Open the app and select the region "Russia" (or your country), which is important because the region depends on the available features and servers.
2. Sign up or sign in to your Xiaomi account. If you don't have an account, create it via email or phone number.
3. After entering, click on the + sign in the upper right corner to add a new device.

In the list of devices, find the category "Vaccelers" and select the model Mi Robot Vacuum Mop. If your model is not in the list, try to select "Other device" and manually enter the name.

💡

If the Mi Home app doesn't find the vacuum cleaner, try restarting your smartphone and router, and check if the antivirus is blocking your local network connection.

Once you have selected the model, the app will suggest connecting to Wi-Fi. Make sure you are connected to a 2.4 GHz network, and enter the password. If the password contains Cyrillic characters, replace them with Latin characters.

Connecting a robot vacuum cleaner to Mi Home: step-by-step instructions

Now, to the most important step, synchronizing the vacuum cleaner with the application, follow the instructions.

1. Turn on the vacuum cleaner by pressing and holding the power button on the case for 3 seconds until you hear the beep.
2. In the Mi Home app, click Add Device and select Mi Robot Vacuum Mop.
3. Make sure the indicator on the vacuum cleaner flashes orange (meaning it’s ready to plug in).
4. Click "Next" in the application and wait for the vacuum cleaner to issue a confirmation beep.
5. Connect to a temporary Wi-Fi network that the vacuum cleaner will create (the name will begin with mirobot-).
6. Return to the Mi Home app and select your 2.4GHz home network, enter your password.

If the connection is successful, you will see a message "Device added." Now the vacuum cleaner will appear in the main menu of the application.

• 🔌 Is the Wi-Fi password correctly entered (registration matters!).
• 📡 Does the router work in 2.4 GHz mode (some routers automatically switch to 5 GHz).
• 📱 Are the smartphone settings allowed to connect to local networks (on Android this is Settings) → Connections → Other networks).

⚠️ Warning: If the vacuum cleaner doesn't connect, try resetting it. To do this, press and hold the "Power" and "Home" buttons simultaneously for 10 seconds until you hear a double beep.

Initial configuration: map creation and basic parameters

Once connected, the vacuum cleaner will automatically start mapping the space, which can take anywhere from 5 to 15 minutes depending on the area of the apartment.

• 🚪 Close all doors so that the robot does not move to other rooms.
• 🧹 Remove small objects (wires, toys, shoes) that may interfere with scanning from the floor.
• 🌡️ Avoid direct sunlight on vacuum cleaner sensors – this can distort the map.

When the map is ready, the Mi Home app will show you your home plan.

• 📍 Divide the map into rooms (click "Edit" and draw lines between zones).
• 🔒 Ask "No-go zones" (e.g. around carpets or flower pots).
• 📏 Set up Virtual Walls to restrict vacuum cleaner access to certain areas.

Tip: For a more accurate map, perform 2-3 test cleanings in Standard mode, which will help the robot better remember the location of furniture and obstacles.

Advanced settings: optimizing cleaning for your needs

After basic setup, you can go to fine optimization. In the Mi Home app, open the vacuum cleaner card and go to Settings → Cleanup options. Here you can find the following options:

• 🔄 Repeated cleaning of zones: you can set up to 3 re-passes on highly contaminated areas.
• 🕒 Schedule: set up automatic cleaning by day of the week and time, for example, you can program the vacuum cleaner to clean on Mondays, Wednesdays and Fridays at 11:00.
• 🔋 Battery saving mode: when activated, the vacuum cleaner will return to the docking station at a charge level of 20%.
• 🎯 Targeted cleaning: allows you to send a vacuum cleaner to a specific room by voice (if connected to Xiaomi) AI Speaker).

Important detail: if you use the wet cleaning function, remember to drain water from the tank after each cleaning. Stagnant water can cause unpleasant odor and bacteria to multiply.

For users who have other Xiaomi devices (such as smart lights or sensors), you can set up automation.

• 💡 The vacuum cleaner will start cleaning when you leave the house (according to the geolocation of the smartphone).
• 🚪 Cleaning will start automatically when the windows open (if the Xiaomi sensor is connected). Door/Window Sensor).

Firmware Update: Why It Matters and How to Do It

Regular firmware updates improve the vacuum cleaner by adding new features, correcting navigation errors and increasing stability.

1. Open the Mi Home app and select your vacuum cleaner.
2. Go to Settings → About the device → Update firmware.
3. If a new version is available, click "Update".
4. Make sure the vacuum cleaner is connected to the charger and is located next to the router (the Wi-Fi signal should be stable).

The upgrade process takes 5-10 minutes. Don't interrupt it or turn off the vacuum cleaner. Once completed, the device will automatically restart.

⚠️ Warning: If the vacuum cleaner gets worse after the upgrade (for example, does not build a map well or does not return to the base), try rolling back the firmware. → Feedback).

Useful Lifehack: Enable Auto Update in your settings so that the vacuum cleaner can install critical patches on its own, but check other users’ feedback on the new firmware on forums (e.g. 4PDA) before doing so.

💡

Update your firmware only with stable Wi-Fi and >50% battery charge. Interrupted updates can cause system failure.

Solving typical problems when setting up

Even after you set it up properly, you can have problems, and let's look at the most common ones and how to fix them:

If the vacuum cleaner does not respond to commands from the application, try:

1. Reboot the vacuum cleaner (hold the power button for 10 seconds).
2. Reinstall the Mi Home app.
3. Check if the firewall or antivirus is blocking the connection to Xiaomi servers.

If the problem persists, contact support via the app or on the official Xiaomi website.

• 🆔 Serial number of the vacuum cleaner (located on the bottom of the).
• 📱 Mi Home version of the app.
• 📡 Router model and type of connection (2.4/5 GHz).

FAQ: Answers to Frequent Questions