How to set up the remote from the smart lamp Xiaomi: full instructions with tips

Xiaomi smart lamps are some of the most popular smart home devices, but they can’t be used properly without setting up the remote control. The remote doesn't respond to commands, the lamp flashes when you press buttons, or the device is not detected at all in the application. In this article, we will discuss all the ways to configure the remotes Yeelight, Mi LED Aqara, including solutions to common errors and hidden features.

It's important to understand that the setup process depends on the lamp model and the remote version. LED Desk Lamps are customized via Mi Home, and Yeelight may require a separate app.We'll look at the universal techniques that work for most devices, as well as the nuances for specific models. If you just bought a lamp or remote control, start with the section on initial binding. If the device was already in use but stopped working, pay attention to the reset and re-synchronization unit.

1. Which remotes are compatible with Xiaomi lamps?

Before you start setting up, make sure your remote is really lamp compatible. Xiaomi produces several types of remotes, and not all of them are interchangeable.

• 🔘 Remote for Yeelight – works with lamps of the Yeelight series LED, Yeelight Ceiling and some Mi models LED. He has. 4-6 buttons (inclusion, brightness, color modes).
• 📱 Mi Remote (Aqara) is a universal remote for smart homes, supports Aqara lamps and some Mi Home devices.
• 💡 Remote for Mi LED Desk Lamp – comes complete with table lamps, has touch control and an on button.

If your remote is not on this list, check its model on the case (usually listed on the back or under the battery). WXKG01LM or WXKG11LM The Aqara series requires a separate setup via Mi Home or Aqara Home.

⚠️ Note: Remotes from Yeelight and Mi lamps LED Trying to tie the Yeelight remote to the MiJia lamp will lead to a synchronization error.

2. Preparation for setting up: what to do before binding

Before you tie the remote to the lamp, follow a few mandatory steps, which will save you from most mistakes like "device not found" or "cannot connect."

Install the latest version of the Mi Home or Yeelight app|

Check the battery charge in the remote (if there is an indicator, it should burn green)|

Make sure the lamp is on and flashes when switched on/off|

Turn it off. VPN Check the stability of the Internet connection|

If you use Aqara, connect the Gateway hub to the network.

-->

If you're in Russia, but the region in the app is set as "China," the lamp and remote may not be detectable, to change the region:

1. Open Mi Home and go to Profile → Settings → Region.
2. Select "Russia" (or "Europe" for some models).
3. Leave the account and log in again.
4. Re-search the devices.

If the lamp has been connected before, but the remote doesn't work, try resetting it.

• Turn off and turn on the lamp 5 times in a row at intervals of 1 second.
• The lamp should start flashing quickly - this is a signal to reset.
• After resetting, repeat the binding procedure.

⚠️ Note: If you use a Yeelight lamp with remote control YL-RC01, After resetting, it may stop responding to commands from the app, in which case, first attach the lamp to the Mi Home, and then set up the remote control.

3. Step-by-step instruction: how to tie the remote to the lamp

Consider a universal customization method that works for most Xiaomi remotes. If your model requires a special approach, see the section on specific devices below.

Step 1: Connecting the lamp to the application

If you haven’t added a lamp to Mi Home or Yeelight yet, do so:

1. Open the app and click Add Device (+).
2. Select the category "Lighting" and find your model lamp.
3. Follow the instructions on the screen (usually you need to turn the lamp on the network and wait for the blink).

Step 2: Adding the remote

After successfully connecting the lamp:

1. Return to the home screen of the app and click Add Device again.
2. Select the category "Pulse" or "Management".
3. Find a model of your remote (e.g. Yeelight Remote or Aqara Wireless Switch).
4. Press and hold the button on the remote (usually the power button) for 5 seconds until the indicator flashes.
5. Wait for the message of successful connection.

Step 3: Linking the remote to the lamp

Now you need to "connect" the remote and the lamp:

1. Open the lamp card in the app.
2. Go to Settings. → Device control → Add the remote.
3. Select your remote from the list.
4. Press the button you want to link (for example, the power button).
5. Repeat for all the buttons you need (brightness, color, etc.).

If the remote is not detected, try holding the switch on the lamp and pressing the button on the remote for 10 seconds at the same time, which force the pairing mode to be activated.

💡

If you have multiple lamps, you can link one remote to all at once, and then select Group Control in the remote settings and add the devices you want.

4.Configuring remotes for specific lamp models

Some Xiaomi lamps require a special approach. Let's look at the most popular models.

🔹 Remote for Yeelight LED (model YL-RC01, YL-RC02)

These remotes work with Yeelight Color and Yeelight White lamps.

1. Install the Yeelight app (it’s better optimized for these devices than Mi Home).
2. Add the lamp through Add the device → Lighting.
3. After connecting the lamp go to the Devices → Your lamp. → Settings → DU remote.
4. Press "Add remote" and hold the button on the remote until the indicator flashes.

If the remote is not tethered, try updating the lamp firmware through Settings → Update of the PO.

🔹 Aqara Wireless Switch Remote (WXKG01LM, WXKG11LM)

These remotes require the Aqara Gateway hub.

1. Connect the hub to the network and add it to Mi Home.
2. Click Add Device and select Aqara Wireless Switch.
3. Press and hold the button on the remote until the hub beeps.
4. After adding the remote, go to Automation → Create a script.
5. Select the "Push the remote button" condition and the "Lamp control" action.

🔹 Remote for Mi LED Desk Lamp 1S (ZNLDP12LM)

This remote comes with a desk lamp and adjusts automatically when you first connect.

1. Turn off the lamp for 10 seconds, then turn it on.
2. Press and hold the touch button on the remote for 5 seconds.
3. The lamp should flash twice, which is a signal of successful synchronization.

5. Common mistakes and their solutions

Even with the right setup, there can be problems, and here are the most common mistakes and ways to fix them:

If the lamp flashes red when you press the remote, it indicates a synchronization error.

1. Turn off the lamp for 1 minute.
2. Turn it back on and press the button on the remote.
3. If the blinking continues, reset the lamp to factory settings.

⚠️ Note: If you use a Yeelight lamp with firmware older than 2022, some remotes may not be supported.Update firmware through the Yeelight app in Settings section → Update.

6. Additional remote functions: what can be configured

Xiaomi remotes support not only basic functions (on/off), but also advanced settings.

• 🎨 Color control: You can program buttons on Yeelight remotes to switch between pre-saved colors (e.g., warm white, cold white, RGB).
• 🌓 Brightness Adjustment: Some remotes have a slider or buttons "+/-" smooth-shift.
• ⏱️ Timers and scripts: Through the Mi Home app, you can create automation, where the remote will turn on the lamp on a schedule or under certain conditions (for example, when driving).
• 🔄 Group control: One remote can control several lamps at the same time (configure in Remote settings) → Groups of devices).

To customize color scenarios:

1. Open the Mi Home app and select your lamp.
2. Go to the Scripts. → Add a script.
3. Select "Remote Control" as a trigger.
4. Set up an action, such as “Set Color: Blue, Brightness 50%”.
5. Save the script and check the remote.

💡

If your remote supports double-pressing, you can program it to do different things, like one tap to turn on the lamp, double tap to switch on the color.

7. How to reset the remote to factory settings

If the remote has stopped working or you want to reconfigure it for another lamp, reset it.

• 🔄 Yeelight remotes: Hold the on button for 15 seconds until the indicator blinks 3 times.

Once reset, the remote will disappear from the list of devices in the application, and to use it again, you have to repeat the binding procedure from scratch.

⚠️ Warning: Resetting the Aqara remote does not remove it from the Gateway hub.To completely untie the device, do a reset and then manually remove it via Mi Home → Devices → Settings → Delete.

8. Alternative ways to control the lamp without a remote control

If the remote is broken or lost, the Xiaomi lamp can be controlled in other ways:

• 📱 Application Mi Home/Yeelight: Full control over color, brightness and schedule.
• 🗣️ Voice assistants: Alice (Yandex), Google Assistant and Siri (via HomeKit for some models) are supported).
• 🖥️ Smart speakers: Yeelight lamps compatible with Xiaomi Mi AI Speaker and Amazon Echo.
• 🔌 Hub Automation: Aqara or Mi Home Gateway hubs allow you to create scripts with other devices (e.g., turn on the lamp when you open the door).

To connect the lamp to Alice:

1. Open the Yandex app and go to Devices → Add the device.
2. Choose Xiaomi and log in through your Mi Home account.
3. Allow access to the devices and select your lamp.
4. Now you can control your voice, "Alice, turn on the lamp by 50%."

💡

If the lamp does not appear in the list of devices for Alice, check that Mi Home it is added in the region "Russia".

FAQ: Frequent questions about setting up Xiaomi remotes