Setting up voice control on the robot vacuum cleaner Xiaomi Dreame D9: full guide 2026

Xiaomi Dreame D9

30%

Dreame D9

This article provides step-by-step instructions for linking to Alice, Google Assistant, and Mi Home, a breakdown of typical errors (such as when a vacuum cleaner doesn’t respond to commands), and tips for optimizing voice control. We have taken into account all the nuances of firmware 2023-2026, so the instructions are relevant even for updated versions of Dreame. D9 matter-supported.

Important: voice control works only when you connect the vacuum cleaner to Wi-Fi (not mobile Internet!) and requires a Mi Account. If you do not already have an account, register it in advance - it will take no more than 2 minutes.

1. Preparation of the robot vacuum cleaner for voice control

Before setting up the voice assistant, make sure that Xiaomi Dreame D9 If you miss this stage, you run the risk of synchronization errors or lack of response to commands.

What to do in advance:

• 🔋 Charge the vacuum cleaner to a minimum of 50% (at low charge, some functions are blocked).
• 📶 Connect Dreame D9 2.4 GHz Wi-Fi network (5 GHz not supported!).
• 📱 Install the latest version of the Mi Home app (or Dreamehome for some regions).
• 🔄 Update the vacuum cleaner firmware to the current version (see section below).

If the vacuum cleaner is already connected to the Mi Home, but voice commands are not working, check:

1. Is the device on the same network as the smartphone/column with the assistant?
2. Is there a restriction on remote control in the Mi Home settings (Device section) → Settings → Management).
3. Have you lost the settings of the region in the account Mi Account (should coincide with the region of the vacuum cleaner purchase).

Battery charge >50%|Connection to 2.4 GHz Wi-Fi|The latest version of the Mi Home|The vacuum cleaner firmware is updated|Device in the same network with an assistant-->

⚠️ Note: If you are using Dreame D9 firmware-old 3.5.8_2005, voice commands may not work smoothly. Update the software via Mi Home or manually (instructions in the next section).

2. firmware update: why it's critical for voice control

Many users miss this step, and in vain: in firmware older than 2022, there is no support for the Matter protocol, which is necessary for stable work with Alice and Google Assistant.

• Ignore commands due to incompatibility API.
• “Forget” synchronization settings after rebooting.
• Error "Device is not responding" in the assistant application.

How to update firmware:

1. Open Mi Home, select Dreame D9 device-list.
2. Go to Settings → About the device → Update firmware.
3. If a new version is available, click Update and wait until it is completed (don’t interrupt the process!).

If the automatic update does not work:

• 🔄 Restart the vacuum cleaner (hold the power button for 10 seconds).
• 📡 Reconnect it to Wi-Fi.
• 📥 Download the firmware manually from the official Xiaomi website (Support section) and download it via Mi Home.

3. The link with Alice: step-by-step instructions

Alice from Yandex is the most popular voice assistant in Russia, and Dreame D9 It integrates well with it. The key is to set the bundle up properly.

Step 1 Connection to Yandex.Ecosystem

• 📱 Open the Yandex (or Alice) app on your smartphone.
• 🏠 Go to the Smart Home section → Add the device.
• 🔍 In search, type in Dreame. D9 and select it from the list.
• 🔗 Sign in to Mi Account (use the same data as you use in Mi Home).

Step 2: Set up rooms and scenarios

To make Alice understand which room to clean, you need to:

1. In Mi Home, create a map of the room (if you have not already done so).
2. Assign each room a name (for example, “living room”, “kitchen”).
3. In the application Yandex synchronize rooms: Smart home → Settings → Rooms.

Examples of voice commands for Alice:

• 🗣️ «Alice, run the vacuum cleaner in the living room».
• 🗣️ «Alice, turn on Dreame at maximum power».
• 🗣️ «Alice, send the vacuum cleaner to the base».

1. Reboot the column/smartphone.

2. Remove the device from Yandex.Ecosystem and add again.

3. Check whether Mi Home is not a restriction on access to third-party services (Settings) → Security).-->

4.Integration with Google Assistant

If you use Google Home or Google Assistant on your smartphone, connect Dreame D9 It's only 5 minutes, and the main difference is that you have to use Mi Home as a bridge.

Instructions:

1. 📱 Open Google Home on your smartphone.
2. 🏠 Press Add Add Add. → Manage devices.
3. 🔍 In the list of brands, choose Xiaomi.
4. 🔗 Sign in to Mi Account (same details as in Mi Home).
5. 🤖 Choose Dreame D9 from the list of devices and assign him a room.

Teams for Google Assistant:

• 🗣️ «Okay, Google, run the kitchen vacuum cleaner».
• 🗣️ «Okay, Google, set Dreame to quiet mode».
• 🗣️ «Okay, Google, stop cleaning».

⚠️ Note: If Google Assistant gives an error "Can't execute command", check:

• Is the vacuum cleaner connected to the Mi Home (sometimes the connection is reset after updates).
• Is Google Home a restriction on managing devices from other networks (Settings) → Smart home. → Settings of the device).
• Is Dreame in conflict? D9 with other robot vacuum cleaners on the same network (remove duplicates).

Alice.|Google Assistant|Siri|Other|Not using.-->

5.Configure via Mi Home: an alternative method

If you don’t want to connect third-party assistants, you can manage Dreame. D9 You can use it directly through Mi Home:

1. 📱 Open Mi Home and select a vacuum cleaner.
2. 🎤 Click on the microphone icon in the upper right corner.
3. 🗣️ Command (e.g., “Start cleaning»).

Advantages of this method:

• ⚡ No need for additional applications.
• 🔒 It works even without the Internet (if the smartphone and vacuum cleaner in the same network).
• 📊 Supports all cleaning regimes, including zoning.

Disadvantages:

• 📱 Requires an open Mi Home app (uncomfortable for fast teams).
• 🗣️ Voice recognition is worse than Alice or Google.

💡

Voice control via Mi Home is a good option for testing commands before setting up Alice or Google Assistant.

Typical errors and their solution

Even when you're properly configured, voice control can malfunction, and here are the most common problems and ways to fix them:

Additional advice:

• 🔄 If the vacuum cleaner "gluts", reset its settings to factory (Settings) → Reset) and reset.
• 📡 For stable operation, use a router with Wi-Fi 6 support (or at least 802.11n).
• 🔋 If the vacuum cleaner battery is discharged below 20%, some voice commands may be ignored.

7. Voice control optimization: tips from experienced users

To make voice commands work as efficiently as possible, use these life hacks:

1. Set up synonyms for rooms

In Mi Home and Yandex.Ecosystem, you can give rooms alternative names, for example:

• 🏠 «Living room» → «The Hall, The Big Room».
• 🍳 «Kitchen» → «Dining room, Where to eat».

This way, Alice or Google Assistant will understand your commands better, even if you say, “Clean the room up.”

2. Create routines (scenarios)

In Yandex.Ecosystem or Google Home, set up automatic scripts.

• 🌅 «Morning cleaning: start of vacuum cleaner at 9:00 in quiet mode.
• 🌙 «Night mode: return to base at 22:00.

3. Use short commands

The vacuum cleaner responds better to clear phrases:

✅ «Alice, start the vacuum cleaner" (working steadily).

❌ «Alice, I need you to turn on the living room cleaning please).

4. Check compatibility with other devices

If you have other smart gadgets (like the Xiaomi Robot Vacuum Mop 2), make sure their names don't conflict.

💡

If you have multiple vacuum cleaners, give them unique names (e.g. Dreame Kitchen, Dreame Bedroom) to help the assistant correctly identify the device.

FAQ: Frequent questions about Dreame voice control D9