How to fill the dispenser Xiaomi: detailed instructions for all models

Why it is important to fill the dispenser correctly in Xiaomi devices

The dispensers in Xiaomi smart devices are not just detergents or water tanks; they directly affect the efficiency of the appliance, its lifespan and even your health. For example, the wrong dosage of powder in the MiJia washing machine can lead to a plaque on the TEN, and the excess flavoring in the Smartmi moisturizer to irritate the airways. In this article, we will discuss how to avoid typical errors and maximize the use of dispensers in different devices of the brand.

The manufacturer often does not pay enough attention to this issue in official instructions, limiting itself to concise phrases like "fill the detergent." Meanwhile, the choice of product, its number and even the order of filling the compartments depends on the model of the device, water hardness and other factors, We have collected proven recommendations that will help to extend the life of your equipment and save on consumables.

Types of dispensers in Xiaomi devices: where and what they are used for

The dispensers in Xiaomi's ecosystem are found in several types of devices, and their design and purpose are different, so there are no universal filling rules.

• 🧺 Washing machines (MiJia, Viomi): compartments for powder, air conditioning and bleach. Often equipped with filling level sensors.
• 💧 Smartmi, Xiaomi Air Humidifier: water tanks and aromatic additives.
• 🧹 Vacuums and robot vacuum cleaners (Mi Robot Vacuum): detergent containers for wet cleaning. It is important to avoid foaming.
• 🚿 Shower systems (Xiaomi Smart Shower): dispensers for gels and shampoos with automatic mixing.

The most common problems are with washing machines and humidifiers. For example, in MiJia Washing Machine 1S models, users often confuse the compartments for the main wash and pre-soaking, which leads to poor stain removal. And in Smartmi Evaporative Humidifier humidifier humidifiers, the wrong ratio of water to essential oils can cause the ultrasonic membrane to break.

Preparation for filling: what to do before filling the dispenser

Before you pour the detergent or water, follow a few steps that will help avoid most problems:

1. Clean the dispenser. Residues from the previous product can react with the new one to form lumps or foam. Xiaomi washing machines have a Drum Cleanup mode (activated via the Mi Home app).
2. Check the hardness of the water. In regions with hard water (>7 mg-eq/l), the dosage of the powder should be increased by 20-30%, and you can find out the indicator using test strips or at the local water canal.
3. Use only recommended products, such as distilled water or special cartridges for Smartmi humidifiers, and ordinary tap water will produce scale.

Xiaomi washing machines with Direct Motion (e.g. MiJia 10KG) cannot use high foam powders, which can cause E02 error (foam transfusion) and an emergency stop.

Clearing the compartments of the remaining funds |

Check the hardness of the water |

Select the tool by type of device |

Make sure there is no damage to the seals-->

Step-by-step: how to fill the dispenser in the washing machine Xiaomi

Xiaomi washing machines (MiJia, Viomi series) have a standard layout of a dispenser with three compartments. Here is how to fill them correctly:

1. Section I (pre-washing): Used only when selecting the appropriate mode. ⅔ It's a liquid powder or gel, and it takes 1 tbsp.
2. Section II (main wash): main compartment. Dosage depends on the load: up to 3 kg of linen - 30-40 ml of liquid or 1.5 tbsp. spoonful of powder; 3-6 kg - 50-60 ml or 2 tbsp. spoons; 6-10 kg - 70-80 ml or 2.5 tbsp. spoons.

Section III (air conditioning/rinse)

MAX

Persil Sensitive

Important: in machines with Auto Dosing function, manual filling of compartments is blocked, in which case the product is poured into a special tank for 1-2 months of use, and the machine calculates the portion based on the weight of the linen and the degree of contamination.

⚠️ Note: If after washing in the compartment II There's still some undissolved powder left, which is a sign that the water is not going into the dispenser. Check the bay filter (located at the back of the car under the top cover) and clear it of the clog.

Features of filling the dispenser in Xiaomi air humidifiers

The Smartmi and Xiaomi Air Humidifier humidifiers require a special approach, and the main mistake users make is the use of tap water, which leads to the formation of white plaque on the ultrasonic membrane and reduces the life of the device by 30-40%.

Completing recommendations:

• 💧 Water: only distilled or filtered (reverse osmosis) boiled, cooled to room temperature at the extreme.
• 🌿 Flavor: Add no more than 2-3 drops per 1 liter of water. Excessing the dosage can irritate the mucous membranes. For models with Aroma Diffuser function, use only the original Xiaomi cartridges.
• 🧼 Cleansing additives: 1 time per month pour a solution of citric acid (1 tbsp. spoon per 1 liter of water) to remove scale. Turn on the device for 1 hour in Max. moisturizing mode.

Hybrid models (such as Smartmi Evaporative Humidifier 2) do not use essential oils, they clog evaporative filters, and a separate compartment with a carbon filter is provided for flavoring.

💡

If an unpleasant odor appears in the humidifier, pour a solution of hydrogen peroxide (1 tbsp. spoonful of 3% peroxide per 1 liter of water) into the reservoir and turn it on for 30 minutes.

Frequent Mistakes and How to Avoid Them

Even experienced users sometimes make mistakes when working with dispensers, and here are the most common ones and ways to prevent them:

• 🧼 Overflow of compartments: excess detergent leads to increased foaming and can cause leakage. Always focus on labels MAX dispenser.
• 🔄 Mixing incompatible products: for example, chlorine bleach and enzyme powders neutralize each other. Use them in different washings.
• 🚫 Ignoring water hardness: in regions with hard water (>10 mg-eq/l) be sure to use softeners (e.g. Calgon) or increase the dosage of the powder.
• 🕳️ Forget to clean the dispenser: the residues dry up and form a film that becomes a breeding ground for bacteria. Clean the compartments at least 1 time a month.

Special attention should be paid to wet-cleaning robots (e.g. Mi Robot Vacuum-Mop 2), where a common mistake is to use conventional detergents instead of robot-specific ones, and they form too much foam that clogs the pump and causes E10 error.

⚠️ Note: Xiaomi washing machines with Steam Wash function cannot use chlorine products. When heated, they emit toxic gases that can damage the hatch seals.

How to extend the life of the dispenser: tips for care

Regular care of the dispenser not only improves the quality of the device, but also prevents expensive breakdowns.

1. Monthly cleaning: For washing machines: remove the dispenser, soak in warm water with vinegar (1:1) for 30 minutes, then brush. For humidifiers, use special cleaning tablets (for example, Smartmi Cleaning Tablets).

Drying

Checking seals

MiJia

XMA1903001

For humidifiers Xiaomi recommends once every 2 weeks to disinfect the tank with a solution of chlorhexidine (0.05%). This prevents the formation of a bifilm, which can cause an unpleasant smell.

💡

The use of distilled water in humidifiers increases the service life of the ultrasonic membrane by 2-3 times compared to tap water.

FAQ: Answers to Frequent Questions