How to pump the inflatable mattress with a Xiaomi compressor: instructions with photos and videos

Inflatable mattresses have become an integral part of home comfort, used for guests, camping or even as a temporary replacement for the main bed, but manually pumping with a foot or hand pump takes energy and time, especially if the mattress is large. Portable compressors from Xiaomi solve this problem: they are compact, work from the same source. USB They can do it in minutes, but not everyone knows how to plug in a compressor, choose the optimal pressure, or avoid damaging the mattress.

In this article, we will analyze the step-by-step algorithm for pumping any inflatable mattresses (including Intex, Bestway, etc.) using compressors Xiaomi Mi Portable Electric Air Pump, Xiaomi Mijia Air Pump Pro and similar devices. You will learn which adapters will be needed for different valves, how to control the process on the pressure gauge (if it is included), and what to do if the mattress is “pumped” or compressor suddenly goes off. We will also reveal hidden settings of some Xiaomi models that allow you to adjust pressure more accurately – this information is not found in the standard instructions.

Before you start, check: your compressor must support the injection mode (not all Xiaomi models can inflate and deflate» (💨), So it's designed only for pumping air - such a compressor for pumping a mattress is not suitable.

1.What Xiaomi compressors are suitable for pumping mattresses

Not all Xiaomi portable pumps are capable of effectively inflating the mattress.

• 🔋 Type of power: Battery models (such as the Mijia Air Pump Pro) are more convenient for travel, but require charging. USB-The Mi Portable Electric Air Pump 1S) powerbank or socket, but tied to the power source.
• 🌀 Performance: Double mattress needs airflow compressor ≥15 l / min Models with an indicator of 10-12 l / min are suitable only for inflatable cushions.
• 🔄 Modes of operation: the device must support inflation, not just deflation!
• 🔌 Adapters included: Boston, Pump-Tite or Intex mattresses may need adapters (often in a compressor box).

Compare the popular models in the table:

If your mattress has an electric pump built in, the Xiaomi compressor can be used as a backup option (for example, on a hike).However, note: some mattress models (for example, Intex Ultra Plush) require pressure. ≥180 mbar – this task can only be handled by Deerma or Viomi from the table above.

Preparation of the mattress and compressor for pumping

Before connecting the compressor, follow several mandatory steps:

1. Spread the mattress on a flat surface (no sharp objects!). Make sure the valve is in position. OPEN (On some mattresses (Bestway, Intex) the valve must be turned counterclockwise.
2. Check the integrity: inspect the mattress for punctures or cracks, and even a small hole under compressor pressure can turn into a large rupture.
3. Choose an adapter: compare the size of the compressor nozzle and the mattress valve. Complete with Xiaomi, there are usually 3-4 adapters (see photo below).
4. Charge the compressor (if battery) or prepare the power bank. Make sure the voltage meets the device requirements (5V/2A for USB-model).

⚠️ Note: If your mattress was previously pumped with a hand pump, condensate may have accumulated in it. Before using the Xiaomi compressor, flush the valve manually (just blow it into it) - this will prevent moisture from entering the pump mechanism.

3. Step-by-step instruction: how to pump a mattress with a Xiaomi compressor

The algorithm is the same for most compressor models, but there are nuances depending on the type of mattress valve.

1. Connect the adapter to the compressor. Intex mattresses are usually suitable for a nozzle with a marker B, for Bestway - C. If you are not sure, apply it in turn: the correct nozzle should fit tightly on the valve without gaps.
2. Insert the adapter into the mattress valve and fix it (on some models you need to turn the nozzle clockwise before clicking).
3. Turn the compressor into air injection mode: On Mijia Air Pump Pro: hold the button ↑ 2 seconds on the Mi Portable Electric Air Pump 1S: single-press «+».

Control the process

• If the compressor has a built-in pressure gauge (as in Deerma), watch the parameters. Optimal pressure for the mattress: 100-150 mbar.
• If the pressure gauge is not there, pump until the mattress is elastic, but not "stone." The pumped mattress may burst!
• Turn off the compressor and quickly close the mattress valve (turn counterclockwise). If you do this too late, some of the air will come out.

🎥 Video Instructions (click to expand):

⚠️ Warning: If the compressor suddenly shuts down during operation, check:

• Battery charge (battery models).
• The quality of the adapter's connection to the valve (possibly the nozzle has jumped).
• Overheating of the device (some Xiaomi models are turned off after 10 minutes of continuous operation).

💡

If the Xiaomi compressor doesn't turn on, try resetting: press the power button for 10 seconds. This helps with software failures.

4.Optimum pressure: how not to pump the mattress

One of the most common mistakes is exceeding the recommended pressure, which leads to:

• 💥 Breaking the seams of the mattress (especially in budget models).
• 🛌 Discomfort during sleep (a pumped mattress is too rigid).
• ⚡ Overloading of the compressor (accelerated wear of the engine).

How to determine the optimal pressure:

• 📏 Follow the mattress instructions: manufacturers usually indicate the range in mbar or PSI (100-120 mbar for Bestway Comfort Plush).
• 👆 Hand test: press the mattress with your palm. It should bend 2-3 cm, but not "fall over».
• ⚖️ Use an external pressure gauge (if the compressor does not have one) and connect it to the mattress valve via a T-shaped adapter.

Xiaomi Mijia Air Pump Pro and Viomi Air Pump have a hidden pressure setting function:

1. Turn on the compressor.
2. Press the button twice. ↑ — The current value in mbar will appear on the display.
3. Buttons. +/– Set the threshold (e.g., 110 mbar).
4. Hold on. ↑ 3 seconds to save.

The compressor will then automatically shut down when the pressure is reached.

⚠️ Note: If your mattress has a dual chamber (e.g. Intex Dura-Beam), pump the cameras in turn.

Frequent problems and their solutions

Even with a Xiaomi compressor, you can have problems.

If the Xiaomi compressor doesn’t turn on at all, try:

1. Reset settings (press the power button for 10-15 seconds).
2. Check the power cable (for the USB-model).
3. Update the firmware through the Mi Home app (if the model supports it) OTA-update).

🔧 Secret Diagnostic Mode (Works on Mijia Air Pump Pro):

1. Turn off the compressor.


2. Press the ↑ and ↓ buttons simultaneously for 5 seconds.




3. the display will appear error code (for example, E1 - overheating, E2 - low charge).




4. To reset the error, hold the power button for 10 seconds.

💡

If the Xiaomi compressor shuts down after 1-2 minutes of operation, it is likely that overheating protection will work. +25°C or take breaks every 5 minutes.

6. Alternative pumping methods (if the Xiaomi compressor is not suitable)

If your Xiaomi compressor is not doing the job (for example, due to poor performance), consider alternatives:

• 🚗 Car compressor: connect via lighter. Use adapter for mattress valve. Pressure control with pressure gauge (do not exceed 0.15 bar).
• 💨 Blow vacuum cleaner: connect the hose to the exit hole. Minus - it's difficult to control pressure.
• 🏠 Fixed pool pump: suitable for large mattresses (e.g. Intex Queen) with a capacity of 50 l/min.
• 🧘 Hand-held foot pump: budget option, but requires physical effort.

💡 Lifehack: If you have a Xiaomi robot vacuum cleaner with wet cleaning function (like Mi Robot Vacuum-Mop 2), it can be adapted for pumping:

1. Remove the water tank.
2. Connect to the outlet a flexible hose (for example, from the dropper).
3. Turn on the maximum suction power mode - air will be blown out through the hose.

⚠️ Note: This method is only suitable for mattresses with low pressure required (≤80 mbar) and can damage the vacuum cleaner if used for long periods!

7. care for Xiaomi compressor after mattress pumping

To make the device last longer:

• 🧹 Clean the inlet after each use: blow it or remove the dust with a brush.
• 🔋 Store battery models with a charge of 40-60%. Full discharge or constant recharging reduces battery life.
• 🌡️ Avoid extreme temperatures: Do not leave the compressor in the sun or in the cold. +5°C +30°C.
• 🔌 Use the original cables: cheap USB-The cords may not provide the right current (2A), which will cause overheating.

🛠️ How to disassemble a Xiaomi compressor for cleaning (on the example of Mi Portable Electric Air Pump) 1S):

1. Unscrew 4 screws on the bottom cover (need a cross screwdriver). PH0).
2. Take the body off carefully, don't pull the wires!
3. Blow the fan blades with compressed air (you can use a can to clean the equipment).
4. Lubricate the engine axis with silicone lubrication (1 drop).
5. Collect it in reverse order.

⚠️ Warning: disassembling the compressor is warranty-free! Only resort to this if the device is no longer warranty or other cleaning methods have not helped.

FAQ: Answers to Frequent Questions