How to Wash the Floor with a Xiaomi Robot Vacuum Cleaner: A Complete Guide from Preparation to Care

Why Xiaomi Robot Vacuums Have Become Important Floor Washing Assistants

Robot vacuum cleaners Xiaomi has long ceased to be just gadgets for the lazy — they have become full-fledged assistants in cleaning, able not only to collect dust, but also to clean the floors. W10 viomi V3 Pros are equipped with water tanks, vibrating cloths and intelligent sensors that adapt to the type of coating, but many users still do not use the full potential of these devices, limiting themselves to basic settings.

In this article, we will look at all the steps of floor washing with a Xiaomi robot vacuum cleaner, from the preparation of the room and the choice of detergent to the intricacies of setting up the Mi Home app and solving typical problems. You will learn how to achieve perfect cleanliness without divorces, how to extend the life of accessories and why the robot sometimes refuses to wash certain areas.

Preparation of the room: what to do before cleaning

Even the smartest robot can't clean a room if it's not prepared. Let's start with the obvious, but often ignored, that is, get anything that can interfere with movement off the floor, not just wires and toys, but small objects like paper clips, coins or buttons that can get stuck in brushes or damage a rag.

Pay particular attention to the following points:

• 🧹 Long-pile carpets: If they're not fixed, the robot can grab and stop, and it's better to remove them or use the Avoidance Zone feature in the app.
• 🚪 Thresholds and height differences: Xiaomi models overcome obstacles of up to 2cm, but higher ones can become a barrier.
• 🔌 Water sources: If there are puddles on the floor (for example, after watering flowers), the robot can smear them throughout the apartment.
• 🪑 Leg furniture: The thin legs of chairs or tables can get into the cleaning area. lift furniture or use restraints.

Xiaomi robots automatically adjust the washing intensity for laminate, tile or parquet, but for delicate surfaces (such as oilwood), it is better to reduce the level of water supply manually through the application.

Choosing a detergent: what can and can not be used

One of the most common questions is whether it is possible to add detergents to the reservoir of a robot vacuum cleaner. Answer: yes, but not all. The manufacturer recommends using only special liquids for robot vacuum cleaners (for example, Xiaomi Mi Robot Cleaning Solution), but in practice, some household products are also suitable - subject to the rules.

Here is what is strictly forbidden:

• 🧼 Aggressive chemicals: chlorine, bleach, abrasives, can damage rubber seals and rags.
• 🌿 Essential Oils: Even a few drops can leave greasy spots on the floor or cause allergies in pets.
• 🧴 Gels with high foaming: foam can clog filters and pump, which will lead to breakage.

Here is what you can use (in reasonable amounts):

⚠️ Warning: If you use a non-original detergent, after cleaning, be sure to rinse the tank with clean water and wipe the cloth.Residues of the chemistry can cause corrosion of metal parts or unpleasant smell.

Setting up the robot through the Mi Home application: step-by-step instructions

For Xiaomi's robot vacuum cleaner to wash floors efficiently, it needs to be properly configured.Most models are controlled through the Mi Home app (or Dreame/Viomi Let’s look at the key parameters with the example of Xiaomi Mi Robot Vacuum-Mop. 2 Pro:

Selection of cleaning mode:

• 🌊 Mop Mode: Robot washes floors, but does not vacuum.
• 🧹🌊 Vacuum & Mop: First vacuum, then wash. Optimal for general cleaning.
• 🔄 Zone Cleaning: allows you to wash only selected areas (for example, near the front door).

Adjustment of the intensity of washing:

In the menu Cleaning settings → Mode moping can select the water supply level:

• 💧 Weak - for laminate and parquet.
• 💦 Medium - for tiles and linoleum (default mode).
• 🌊 Strong for persistent contamination (for example, after repair).

Cleaning planning:

In the Schedule section, you can set automatic floor washing at a convenient time, and advice: if there are animals or children in the house, schedule cleaning for the time they are absent, so the robot will not avoid moving obstacles.

Pour clean water into the tank|Install a clean cloth|Check the battery charge (minimum 50%)|Close the doors to untidy rooms|Set up cleaning areas in the app-->

Washing Techniques: How to Get the Perfect Results Without Divorce

Even with the right settings, the robot can leave divorces or skip dirt. Here are practical tips for avoiding mistakes:

1.Robot movement: Most Xiaomi models wash the floor on a Z-shaped trajectory, but if there is a lot of furniture in the room, they can switch to chaotic mode. To improve quality, divide the large room into zones in the application and start cleaning alternately.

2. Cleanliness of the cloth: microfiber cloth should be perfectly clean before cleaning.If it has dirt particles from the last time, they will be smeared on the floor. Wash the cloth after each use (handmade or in the washing machine at 30°C).

3. Water temperature: cold water dissolves fat and pollution worse if the robot supports heating (e.g. DreameBot) W10), For models without heating, use warm water (up to 40).°C), but not boiling water.

4. Cleaning direction: Start washing from the farthest corner of the room, moving to the exit. This is especially important for models without Auto Returns to base, so the robot will not ride on the already washed floor.

⚠️ Warning: If the robot starts leaving stripes, check the pressure of the rag on the floor. V3 Pro) it can be adjusted manually through the settings → Moop pressure. Too little pressure leads to divorces, too much to wear out the rag.

💡

To prevent the robot from "forgetting" washed areas, wipe the optical sensors (they are located at the bottom) with a dry wipe before cleaning.

Robot care after cleaning: how to extend the service life

Many users forget that a robot vacuum cleaner requires as much care as a regular one, neglecting to clean causes mold smell, breaks pumps and impairs cleaning quality, and here is a checklist of mandatory procedures:

Cleaning of the water tank:

• After each cleaning, drain the remaining water and dry the tank in the air (not in direct sunlight!).
• Once a week, wash the tank with soap and rinse.
• If you smell, pour a solution of vinegar (1:1 with water) for 10 minutes, then thoroughly rinse.

2. Care for the rag:

• Wash it after 2-3 cleanings (hand-held or in a car in a delicate fabric bag).
• Do not use air conditioning for underwear – it reduces the absorbent properties of microfibers.
• If the cloth has begun to shed or unburden, replace it (original cloths for Xiaomi serve as a slack). ~3–6 months).

Cleaning sensors and wheels:

• Wipe optical and ultrasonic sensors with a wet wipe once every 2 weeks.
• Clean the wheels of wound hair and threads (use tweezers or a special hook from the kit).
• Check brushes for debris - clogged brushes increase the load on the engine.

Battery maintenance:

• If you haven’t used the robot for more than a week, remove the battery or store it at 40-60% charge.
• Once every 3 months, calibrate the battery: discharge the robot to 0% and charge up to 100% without interruptions.

Common Problems and Their Solutions

Even the most reliable robot vacuum cleaners Xiaomi sometimes do not work as expected, let's analyze the typical situations and ways to fix them:

If the problem is not solved, try resetting the robot to the factory.

1. Press and hold the power button and the Home button (if any) for 10 seconds.
2. After restarting, connect the robot to the application again.
3. Update the firmware through Mi Home → Device settings → Software update.

💡

Most floor washing problems are due to incorrect settings in the app or contamination of the cloth/tank, and always start your diagnosis by checking these two points.

Xiaomi models comparison: which is better to wash the floors

Not all Xiaomi robot vacuum cleaners are equally good at wet cleaning, and we tested several popular models and compiled a comparative table:

For high-quality floor washing, it is better to choose models with:

• 🔄 Rotating cloths (for example, DreameBot) W10) — They're better at cleaning up pollution.
• 💧 Large tank (from 250 ml) - less likely to have to add water.
• 🔥 Heated water – hot water removes fat more effectively.

If the budget is limited, pay attention to Xiaomi Mi Robot Vacuum-Mop 2 Pro - this is the optimal value for money. For large houses (from 100 m2), Viomi is better suited V3 Pro thanks to increased tank and improved navigation.

FAQ: Answers to Frequent Questions