How to add a Xiaomi TV to Mi Home: full instructions with pictures and tips

Connecting Xiaomi TV to the Mi Home ecosystem opens up access to advanced smart home features: voice control via Alice or Google Assistant, script automation (such as turning on TV when you return home), and centralized control from your smartphone. However, many users face problems during the addition stage of the device – the application does not find the TV, there are synchronization errors or communication disappears after a reboot.

In this article, we will analyze all ways of connecting (via Wi-Fi, Bluetooth and via the Internet). QR-code), consider the hidden settings Mi Home for Xiaomi TVs, which the manufacturer does not advertise, and give a checklist for troubleshooting. TV 4/4S/4A/4C/4X/5/5X, Redmi Smart TV Xiaomi TV Q1/Q2 PatchWall or Google based TV. If your TV is released before 2019 Check the support for smart home in specs – some early models require manual firmware updates.

1. Preparation of the TV and smartphone before connection

Before adding TV to Mi Home, you must pre-set both devices, and skipping this stage is the main cause of synchronization errors.

On TV:

• 📺 Make sure the TV is connected to the same Wi-Fi network (2.4 GHz or 5 GHz) as the smartphone. The guest network will not work, it blocks local device interaction.
• 🔄 Update your TV firmware to the latest version: Go to Settings → On TV. → Update system. For Google models. TV Path: Settings → System system → Update of the PO.
• 🔓 Enable the Smart Home function: Settings → Smart home. → Connect to Mi Home (some models have a clause called "Mi Account").

On a smartphone:

• 📱 Install the latest version of the Mi Home app (at least below). 6.5.0 for Android/iOS). Download only from official stores (App Store, Google Play or APKMirror).
• 👤 Log in to one Xiaomi account on your TV and in the app. If you have multiple accounts, select the main one - all smart home devices will be attached to it.
• 📶 Enable Bluetooth and geolocation (necessary to find devices on the local network).

💡

If the TV doesn’t find firmware updates, try resetting the network settings: Settings → Network → Forget the network, then connect again.

Pay special attention to the region of your Mi Account. If you use the Chinese version of your TV firmware (e.g., Mi). TV 4X It's not possible to link it to a European or Russian Mi Home account:

⚠️ Note: For Chinese TV models (CN-You will need to create a separate account in the region of China" (mi.com/cn) and use the Chinese version of the Mi Home app (you can download it via APK). Alternative: Switch the global version of the software (risk of loss of warranty).

2. Ways to add a TV to Mi Home

There are three official methods of connectivity, each of which works in different scenarios, depending on the TV model and the features available.

Method 1: Automatic search over Wi-Fi (recommended)

The easiest way that works for most Xiaomi models TV redmi TV:

1. Open the Mi Home app and go to the Devices tab" → "Add the device" (badge"+").
2. Select the category "TV" (or search for the model name, such as "Mi". TV 5").
3. Follow the instructions on the screen. The app will suggest connecting to the TV network (if it supports Mi Mesh) or entering Wi-Fi data manually.
4. Confirm the addition on the TV by selecting "Allow" in the window that appears.

Method 2: Connection through QR-code

If the automatic search does not work, use it. QR-This method is universal for all PatchWall models:

1. On the TV, go to Settings. → Smart home. → Add to Mi Home.
2. Select "Connect through" QR" — The code will appear on the screen.
3. In the Mi Home app, click "Add manually" → "Scan. QR" and point the camera at the TV screen.
4. Confirm the pairing on both devices.

Method 3: Bluetooth Connection (for older models)

It is also useful for TVs without Mi Mesh support (e.g. Mi). TV 4A 32' 2018):

1. Turn on Bluetooth on your TV: Settings → Connections → Bluetooth.
2. In the Mi Home app, select "Add Device" → Televisions → Connect to Bluetooth".
3. Select your TV from the list of devices found (the name will contain the model, for example "MiTV-4A-1234").
4. Confirm the pairing with the code that will appear on the TV screen.

If none of the methods worked, check:

• 🔌 Network Blocking: Some routers (e.g., TP-Link in Guest mode) restrict device interaction on the LAN.
• 🛡️ firewall VPN: They can block the connection to Xiaomi servers. temporarily disable them.
• 📡 Distance to router: If the Wi-Fi signal is weak, the TV may not appear in the list of devices. Bring the router closer or use a repeater.

3. set up the TV in Mi Home after connecting

After successful addition, the TV will appear in the list of Mi Home devices, but for full use you need to configure key settings.

Main settings

Open the TV card in the app and configure the following options:

• 📍 Location: Specify the room where the TV is located (e.g., "Living Room.
• 🔄 Auto Update: Turn on the TV to install new firmware versions on its own.
• 🔊 Notifications: Allow notifications for new features (such as Matter or HomeKit support).
• 🔒 Access control: Set up which family member can control the TV (e.g. limiting access for children).

Creating automation scenarios

One of the key features of Mi Home is automation, and you can set up, for example:

• 🌅 "Morning mode: TV turns on news channel when alarm clock on smartphone turns off.
• 🏠 "Home Mode: TV launches favorite YouTube playlist when you get home (by geolocation).
• 🌙 "Night mode: The TV turns off if the motion sensor does not record activity in the room for more than 30 minutes.

To create a script:

1. In Mi Home, go to the tab "Automation" → "Create".
2. Select a trigger (e.g., “Time” or “Geolocation”).
3. Add action: “Device management → Television → Turn on".
4. Save the script and test it out.

Voice control

After connecting to Mi Home, the TV can be controlled by voice via:

• 🗣️ Alice (Yandex): Say: OK, Yandex, turn on the TV in the living room".
• 🤖 Google Assistant: OK, Google, pause on Xiaomi TV".
• 🍎 Siri (via HomeKit): requires additional customization via Home Assistant.

If the voice commands are not working:

⚠️ Note: Google Assistant needs to enable Google Voice Assistant in your TV settings (Settings) → Smart home. → Voice control. For Alice, link Yandex account to Mi Home (Profile) → Accounts → Yandex).

4. Common mistakes and their solutions

Even with the right connection, users are facing problems. TOP-5 errors and ways of eliminating them.

If you don’t add a TV, try an alternative method:

1. Reset Mi Home settings on your TV: Settings → Smart home. → Reset the connection.
2. Remove the TV from the list of devices in the app (if there is one).
3. Restart the TV and smartphone.
4. Repeat the addition process by selecting another method (e.g., use Wi-Fi instead of using Wi-Fi). QR-code).

5. Hidden Mi Home features for Xiaomi TVs

The manufacturer does not advertise some of the features available after connecting the TV to the Mi Home, and here are the most useful ones:

• 🎮 Game mode on schedule: you can automatically switch the TV to game mode () when you start the console (PS5/Xbox) through HDMI-CEC.
• 👁️ Eye protection: set up automatic brightness reduction and turn on the blue filter after 22:00.
• 🔊 Adaptive sound: The TV will adjust the volume depending on the noise level in the room (requires a noise sensor, such as Xiaomi Mi Sensor).
• 📱 Phone screen on TV: through Mi Home you can quickly duplicate the screen of a smartphone without Miracast (works only on Android).

To activate these functions:

1. Open your TV card in Mi Home.
2. Go to "Additional Settings" (Icon) ⚙️ top-right).
3. Select the option you want and adjust the settings (such as activation time or sensor sensitivity).

💡

Hidden features are only available for TVs on PatchWall 3.0 and up. TV Some of the options may not be available.

6. Security and confidentiality

Connecting the TV to the Mi Home involves transferring data to Xiaomi servers to minimize the risks:

• 🔐 Turn off unnecessary permissions: in the settings of the TV (Settings) → Privacy: prohibit collection of browsing and voice command data.
• 🌐 Use it. VPN: If you are worried about transferring data to China, set up a VPN on a router (for example, WireGuard).
• 📵 Local Mode: Some features (e.g., on/off) work without the cloud. To do this, select Settings in Mi Home → Mode of work → Local".

We also recommend:

• Regularly update the firmware of the TV (once every 1-2 months).
• Do not use one Mi Account for smart home and payment services (Mi Pay).
• Set up two-factor authentication in your Xiaomi account.

⚠️ Warning: If you sell or transfer a TV to another person, be sure to untie it from the Mi Home and reset it to factory settings. Otherwise, the new owner will be able to control your other smart home devices! → Smart home. → Remove the device.

7. Alternative ways to control Xiaomi TV

If Mi Home is not suitable (for example, due to firmware limitations), consider alternatives:

To connect via Google Home:

1. Install the Google Home app on your smartphone.
2. On the TV, turn on Settings. → Accounts → Google → Connect to Google Home.
3. In the Google Home app, click “Add Device” and select your TV.

Home Assistant will require:

1. Install Home Assistant on a server (such as Raspberry Pi).
2. Add the integration of Mi Home through HACS.
3. Sign in with a token from your Xiaomi account (instructions on the official website).

FAQ: Frequent questions about connecting Xiaomi TV to Mi Home