Xiaomi Antibacterial Humidifier has become a hit with smart home owners due to its efficiency and antibacterial properties. However, even the most advanced equipment requires regular maintenance, otherwise you will get a hotbed of mold and harmful microorganisms instead of good. Statistically, 78% of users clean humidifiers less often than necessary, which leads to a shorter life of the device and deterioration of air quality.
In this article, we will look at all the steps of cleaning, from daily care to deep disinfection, pay attention to hidden details (membrane, filter, sensors), and also tell you what mistakes users often make. We will pay special attention to the antibacterial properties of the model and how to preserve them. If you notice that the humidifier has begun to smell, make noise or spray water worse, this instruction is for you.
While Xiaomi is positioning its model as “self-cleaning,” it doesn’t mean the device doesn’t need manual maintenance: the antibacterial coating only slows down the germs’ reproduction, but doesn’t remove scale, dust and organic deposits. Incorrect cleaning can damage the ultrasonic membrane, the most expensive part of the humidifier, and then you will learn how to avoid typical problems and extend the life of the device to the maximum. 5-7 years.
1.Preparation for cleaning: what will be needed and safety measures
Before you start cleaning, disconnect the humidifier from the mains and drain the remaining water. Never immerse the device in the water entirely, which will lead to a short circuit.
- 🧼 Soft sponge or microfibre wipe (abrasive materials scratch plastic)
- 🧴 Vinegar 9% or citric acid (to remove scale)
- 🧪 Hydrogen peroxide 3% (for disinfection)
- 🧽 Toothbrush with soft bristles (for cleaning hard-to-reach places)
- 🚰 Distilled or filtered water (for rinsing)
Important: Do not use aggressive detergents (such as Domestos or Mole), chlorine or alcohol - they destroy the antibacterial coating and can damage the membrane. Also avoid metal pears and hard brushes.
Unique feature of the model: the humidifier Xiaomi Antibacterial has a silver ionic coating on the inner walls of the tank. It can not be cleaned with acids more than 1 time a month - this reduces the antibacterial effect.
⚠️ Warning: If you use aromatic supplements or essential oils, residues may clog the membrane. Before cleaning, wash the tank with warm water and soda (1 tbsp. per 1 l).
2 Daily care: how to prevent the formation of plaque
Even if you use distilled water, a daily mini care will extend the life of the device:
- 💧 Dump the remaining water after each use (standing water is the perfect environment for bacteria).
- 🧽 Wash the tank with warm water (no detergents!) and wipe dry.
- ☀️ Dry the humidifier in disassembled form (cover and tank separately) in a ventilated place.
- 🔄 Change the water in the tank every 24 hours, even if the device is not working.
Why does it matter? The tap water contains calcium and magnesium salts that settle on the membrane and walls, and over time, this leads to:
- Decreased productivity (reduced amount of sprayed water).
- The appearance of a white plaque on furniture.
- Increased noise when working.
Xiaomi recommends distilled or demineralized water, but if this is not possible, you can install a water softening filter (sold separately for this model).
💡
To reduce the formation of scale, add to the water 1-2 drops of table vinegar (on 1 It won't hurt the device, but it will reduce the hardness of the water.
3. Deep cleaning: step-by-step instructions for the tank and membrane
A full cleaning of the Xiaomi Antibacterial Humidifier should be carried out every time. 1-2 Weeks (or more often if the water is hard) let's take the process Step-by-step:
Step 1: Disassembly of the device
- Turn off the humidifier from the socket.
- Remove the top cover by pulling it up.
- Remove the water tank and drain the remains.
- Carefully remove the ultrasonic membrane (it is located at the bottom of the tank).
Step 2. Clean the tank.
- Pour into the tank a warm solution of vinegar (1: 1 with water) or citric acid (2 tablespoons per 1 liter).
- Leave it on. 30-60 minutes, then wash the soft sponge.
- To remove persistent deposits, use a toothbrush.
Step 3. Clean the membrane.
The membrane is the most sensitive part of the moisturizer. Never rub it with a brush or sponge!
- Wash the membrane under running water.
- Soak it in a hydrogen peroxide solution (3%) on 10-15 minutia.
- Rinse with distilled water and dry on a napkin.
Step 4: Clean the base and sensors
At the bottom of the humidifier are humidity sensors and a fan. Rub them with a dry microfiber wipe. Don't use wet rags, which can cause contacts to corrosion.
drain water and disconnect from the network|
Disassemble the humidifier for details|
Soak the tank in acetic solution|
Clean the membrane with hydrogen peroxide|
Dry all the details before assembly-->
4. Disinfection: How to kill bacteria and mold
Even with regular cleaning, bacteria and mold can multiply in the humidifier, especially if you use tap water.
- 🤢 Unpleasant smell (sweet, rotten, rotten).
- 🟢 Green or black raid on the walls.
- 🤧 Allergic reactions in household members (sneezing, coughing).
Use one of the methods to disinfect (do not mix!):
| Method | How to use | Pluses | Cons |
|---|---|---|---|
| Hydrogen peroxide 3% | Pour into the tank for 1 hour, then wash | Kills 99% of bacteria, safe for membrane | It doesn't remove scale. |
| Vinegar 9 percent | Solution 1:1 water, soak on 30-60 mine | Removes scale and disinfects | Can damage antibacterial coating with frequent use |
| Chlorhexidine 0.05% | Treat the walls and membrane, wash off after 20 minutes | Effective against mold | Requires thorough rinsing |
| Special tablets for humidifiers | Dissolve in water according to the instructions | Safe, extends service life | Expensive (from 300 rubles per package) |
⚠️ Warning: If mold has already appeared, do not use bleach - it will damage the plastic and membrane. Better apply a solution of soda (3 tbsp. spoons per 1 liter of water) and mechanically remove the plaque with a toothbrush.
What to do if the smell is left after cleaning?
5. Cleaning the filter and fan: hidden details
Many users forget about the air filter and fan, which also need care. In the Xiaomi Antibacterial Humidifier model, the filter is located under the membrane and is a small mesh.
How to clean the filter:
- Remove the filter (greatly pull the edges).
- Wash under running water or vacuum.
- For persistent contaminants, soak in soapy solution for 10 minutes.
- Dry in the air (do not use a hair dryer!).
The fan is cleaned with a dry wipe. If the blades are covered with dust, use a brush with a soft pile. Do not let moisture enter - this can cause engine corrosion.
💡
The filter in Xiaomi Antibacterial Humidifier is not eternal – it needs to be changed every time. 3-6 months (depends on the hardness of the water). The original filter is ~500 RUB, but you can use compatible analogues.
6. Common User Mistakes and How to Avoid Them
Even experienced humidifier owners make mistakes that shorten the life of the device.
- 🚫 Using hard water without a filter causes membrane to break down. 3-6 months.
- 🚫 Cleaning with metal pears, scratching the antibacterial coating.
- 🚫 Drying the moisturiser in the assembled form, and there's moisture inside, which causes mold to form.
- 🚫 Adding essential oils directly to the water clogs the membrane and spoils the plastic.
- 🚫 Ignoring the mistake E1 (The dry work is broken by an ultrasonic generator.
How to add flavorings correctly?
If you want to use essential oils, buy a special flavor capsule (such as Xiaomi Aroma Diffuser) or add it. 1-2 oil drops on the outside of the tank (not into the water!).
1. water level (at a low level, the pump works for wear).
2. the purity of the membrane (scale increases the load).
Position of the device (should stand on a flat surface).-->
7.Brushing frequency: Moisturizer care schedule
Compliance with the care schedule will extend the life of Xiaomi Antibacterial Humidifier and maintain its effectiveness.
| Type of care | Frequency | What do you do? |
|---|---|---|
| Daily | After each use | Pour water, flush the tank, dry |
| Weekly | 1 time 7 days | Cleaning with vinegar / citric acid, checking the membrane |
| Deep. | 1 time 2 weeks | Peroxide disinfection, filter and fan cleaning |
| seasonal | Before summer storage | Complete disassembly, drying, lubrication of silicone seals |
If the humidifier is used year-round (for example, in the nursery), increase the frequency of deep cleaning to 1 time per week.
⚠️ Warning: If you do not plan to use the humidifier for more than a month (for example, in summer), keep it disassembled and dry.