Modern oral hygiene has long gone beyond brushing, and Xiaomi’s portable irrigators have become one of the most popular solutions on the market. These devices effectively remove food debris and plaque from interdental spaces that a regular brush cannot reach. However, in order for the gadget to last and bring maximum benefit, it is important to know how to properly operate, charge and maintain it.
In this article, we will take a look at the nuances of using stationary and portable models, such as the Mijia Electric Flosser or Soocare, which water is better to pour, how to switch pressure modes and what to do if the device stops working. A competent approach to operation will extend the life of the battery and avoid the typical mistakes of beginners.
First Enabling and Activating the Device
After unpacking the new irrigator Xiaomi do not rush to immediately pour the water and turn it on at full capacity. the first thing you need to fully charge the device, as often gadgets are stored in warehouses with a discharged battery. USB-the cord (depending on the model) to the corresponding contacts on the case and wait until the indicator signals a full charge.
It’s important to check the package: the box should have nozzles, charger and instructions. Some models require initial configuration via the Mijia or Xiaomi Home app, although basic features are available without a smartphone. If you plan to use smart features, download the app, create an account and add the device by following the on-screen prompts.
Before the first use, it is recommended to wash the tank with clean water without nozzles, this will help remove the production dust or particles that may have entered the packaging, and after rinsing, you can start preparing the device for basic work.
⚠️ Warning: Never turn on the irrigator motor without water in the tank or without an installed nozzle. Dry work can damage the pump and cause the engine to overheat.
Preparation of the solution and filling the reservoir
The basis for effective cleaning is the right liquid. Unlike stationary models, Xiaomi portable irrigators have a limited tank volume, so it is important to use the liquid correctly. The basis should always be ordinary warm water (about 35-40 degrees). The use of hot water is strictly prohibited, as it can deform plastic parts and damage seals.
To enhance the effect, you can add special oral rinses, but their concentration should be minimal. It is usually recommended to mix water and rinse in a ratio of 1: 1 or follow the instructions on the bottle of the product. Aggressive alcohol solutions or hydrogen peroxide in its pure form can not be used - they can eat silicone rings and damage the pump.
The filling process is as follows:
- 🌊 Open the tank cover by snapping the lock or turning the top (depends on the model).
- 💧 Pour warm water to the mark MAX, leaning.
- 🧴 If necessary, add a cap for special irrigators.
- 🔒 Close the lid tightly until a characteristic click, ensuring tightness.
Instructions: how to properly brush your teeth
Xiaomi's irrigator technique requires a certain algorithm of actions to achieve the best result and safety of the gums. Don't direct the water stream chaoticly; the movements must be smooth and consistent. Stand over the sink, leaning slightly forward so that the water flows away without splashing around the bathroom.
Turn on the device with a minimum pressure mode, especially if you use an irrigator for the first time. The gums should get used to the pressure of the water. Place the nozzle in your mouth, close your lips (but not tightly so that the water can flow out), and only after that turn on the water supply. Nozzle along the gum line, lingering for 2-3 seconds in each interdental space.
The total time of the procedure should be about 1-2 minutes, pay special attention to hard-to-reach places: the back wisdom teeth and the inner surfaces of the teeth. After cleaning, turn off the device, spit the remaining water and rinse your mouth.
Review of operating modes and settings
Most modern Xiaomi models and sub-brands (such as Soocas) have multiple modes of operation, making them universal for the whole family.Switching is usually done with a short press on the power button. Understanding the differences between modes will help customize the gadget to your individual needs.
Below is a table of the main modes found in current models:
| Regime. | Description | Who's right for? |
|---|---|---|
| Soft (Soft) | Low pressure, pulsating jet | For beginners and sensitive gums |
| Normal (Standard) | Medium pressure, stable jet | For daily hygiene |
| Pulse (Pulse) | Sudden pressure drops | For deep cleaning and massage gums |
| Jet (Jet) | Maximum pressure | For experienced users with healthy gums |
Some advanced models allow you to adjust the pulse rate or have a smart mode that adapts the pressure itself. If you just started using an irrigator, use only the Soft mode for the first month, gradually increasing the intensity so as not to injure the tissue.
Care, cleaning and storage of the device
Regular maintenance is the key to the long-term service of your Xiaomi Flosser. After each use, the tank is left with water, which is the perfect environment for bacteria to multiply. So rule number one: always pour out the remaining water after cleaning.
Once a week, a deep cleaning is recommended, and to do this, fill the tank with water with a small amount of citric acid or a special cleaning agent, turn on the device and let the solution pass through the system, which will help dissolve mineral deposits (scale) inside the pump and tubes.
⚠️ Warning: Do not immerse the main body of the electronic device in water. Wash under the tap can only removable nozzles and tank (if it is removable), but not the unit with the motor itself.
Silicone tips wear out over time and lose their properties, and it is recommended to change them every 3-6 months, depending on the intensity of use.
Solving problems and malfunctions
Even Xiaomi’s high-quality appliances can sometimes work incorrectly, most often users are faced with a drop in jet pressure or a device failure to turn on. If the water pressure becomes weak, check the filter at the water inlet (usually located at the bottom of the tank or at the base of the nozzle), it could be clogged with scale or debris particles.
If the irrigator doesn't turn on, make sure the charge contacts are dry and clean. Contact oxidation is a common problem in the bathroom. Wipe them with a dry cloth or cotton swab soaked in alcohol. Also check if the switch is locked with a safety mechanism (in some models, you need to press the button twice or hold it for 3 seconds).
- 🔋 The device does not hold a charge: the battery may have worn out or a problem in the power controller.
- 💨 Whistling or vibration: check if the nozzle is tightly twisted and if there is no air in the system.
- 💧 Water leakage: inspect rubber seals for damage or contamination.