Compatibility of Dexp and Xiaomi remotes: a complete guide to setup

Owners often face a situation where the remote from one device can control another, especially if we are talking about popular brands like Xiaomi and Dexp. The question of which Dexp remote is suitable for Xiaomi TVs or consoles arises from the desire to replace a lost accessory or combine control in one device. Modern technologies allow you to create cross-compatible solutions, but they require the right approach to configuration.

There are several use cases: trying to control a Xiaomi TV via a Dexp remote, setting up a universal Dexp remote to work with the Mi Box, or using a smartphone as a replacement. The key point is that direct compatibility is only possible if there is an infrared port (infrared transmitter) in the control device. Without this physical component, synchronization of signals is impossible, regardless of the model.

In this article, we will discuss in detail the technical nuances of pairing, codes for setting up and software management methods. You will learn in which cases the “native” Dexp remote can replace the Xiaomi controller, and when to use third-party solutions.

Technical features of IR signals and compatibility

To understand whether a Dexp remote is suitable for Xiaomi, you need to understand the principle of infrared communication. Most household remotes use standard data protocols such as NEC, RC-5 or Sony SIRC. If the Dexp remote and Xiaomi receiver (TV or console) use the same protocol, then theoretically control is possible after reprogramming.

However, the standard Dexp remote is tailored to its manufacturer’s specific command set, which won’t be able to control the Android TV interface out of the box on Mi Box consoles or Xiaomi TVs, requiring either a universal remote or a special training mode, otherwise the buttons will either fail or perform chaotic actions.

It is important to distinguish between two types of Dexp devices: conventional IR remotes and remotes with Bluetooth or voice control. The former have a chance of compatibility through codes, the latter are almost useless for Xiaomi equipment without complex flashing the microcontroller, which is not advisable at home.

Using Xiaomi Smartphone as a Dexp Remote and Vice versa

The most efficient way to combine control is to use a smartphone. Many Xiaomi models have a built-in IR port (Mi Remote), which turns the phone into a powerful universal remote. Using the Mi Remote app, you can configure control of your TV or Dexp monitor by selecting the appropriate brand from the database.

The reverse situation – control of Xiaomi equipment (for example, Mi Box S) using the Dexp remote – is only possible if the Dexp remote is universal. In this case, you need to enter the code of the manufacturer Xiaomi or Mi. If the Dexp remote does not support automatic code search, you will have to go through the combinations manually, which takes time.

The advantage of using a Xiaomi smartphone as a remote for Dexp is that it keeps updating the codebase. You don't have to look for manuals or matchsheets. You just run the app, select the device type and brand, and then follow the instructions on the screen to check the signal.

Setting up a universal Dexp remote for Xiaomi equipment

If you have a universal Dexp remote (often labeled as TV-1301, RM-L1300 or the like), you can try to set it up to work with a Xiaomi TV or set-top box.The process usually begins with turning on the device and pressing the TV or Setup button before the light light up.

The code entry phase is followed by the code entry phase. For the Xiaomi brand (or its sub-brands like Redmi), codes designed for the use of the code are often suitable. OEM-Matrice manufacturers such as Hisense or TCL, Xiaomi uses their platforms a lot, and try typing codes like 0360, 0370, 0570, 0850.

If manually entering the codes did not work, use the auto search function. Press the Power (or TV) button and point the remote to the device. Once the Xiaomi TV turns off, immediately release the button. This will fix the current code in the Dexp remote memory.

Table of popular codes and protocols

To make it easier to set up Dexp universal remotes for Xiaomi appliances and compatible devices, the following table shows the most common codes. Remember that the code can vary depending on the year of release of the TV model or console.

These codes are relevant for Dexp remotes with programming functionality, and if your remote does not support digit input, but only automatic brute force, the process will take longer, so be patient and wait for the device to react.

Problems with Bluetooth remotes and their solution

Modern Xiaomi Mi Box S consoles and new TVs often use Bluetooth remotes instead of infrared. Dexp remote, which runs exclusively on infrared radiation, will not physically be able to transmit a Bluetooth signal. This is a fundamental limitation of the technology.

⚠️ Warning: Don't try to teach Dexp IR to work on Bluetooth. This is technically impossible without replacing internal electronics and soldering the communication modules.

If your Dexp remote has Bluetooth, but was originally paired with another device, you can try reconnecting it. On your Xiaomi TV, go to Settings → Remotes and Accessories → Add Accessory. At the same time, press the Home and Back buttons (or a special combination specified in the Dexp instruction) to go into pairing mode.

💡

If the Dexp remote stopped working with Xiaomi after the system update, try removing the device from the list of paired in the Bluetooth settings and create the pair again.

Alternative solutions: USB and Wi-Fi management

When standard methods don't work, you should consider alternatives. USB-An adapter (usually for computer presentations or media centers), you can try using it with Xiaomi’s Android-powered console. TV. Such devices are often defined as a keyboard or mouse.

You can use emulator apps to manage Wi-Fi, install an app emulating a Dexp remote on your smartphone (if there is such an option in the manufacturer’s ecosystem), or use the standard Google Home / Android TV Remote, which allows you to manage content without the need for physical IR matching.

There are also special IR adapters that can be connected through USB-The port of Xiaomi TV, which allows you to use third-party remotes by broadcasting their signals through the Android software shell, but the configuration of such crutches requires root rights and deep knowledge of the system.

Frequently Asked Questions (FAQ)

💡

The most reliable way to get the Dexp remote to work with Xiaomi is to use it in the manually-input universal remote mode or use the smartphone as an IR transmitter.