What does a robot vacuum cleaner Xiaomi with the function of wet cleaning: a full guide to the possibilities

Xiaomi’s wet-cleaning robots are no longer just smart mops. Modern models like the Mi Robot Vacuum-Mop 2 Pro, DreameBot Z10 Pro or Xiaowa E35 combine laser navigation, artificial intelligence and adaptive cleaning algorithms, but only 30 percent of their functionality is used, limited to basic cleaning on schedule.

In this article, we will take a closer look at the hidden capabilities of Xiaomi’s wet-cleaning robots, from zoning rooms to automatically adjusting the mop pressure depending on the type of coating. You will learn how to set up a device to clean carpets with a pile of up to 2 cm without the risk of getting wet, why some models can bypass carpets when wet cleaning, and how to use Yandex Alice or Google Assistant to voice control complex scenarios.

1. Wet cleaning technologies: how it works inside

Unlike classic robot vacuum cleaners, wet-cleaning models have a water tank and a microfiber wipe that attaches to the bottom of the body, but the key difference is the water supply mechanism:

• 💧 Electronic pump (in Pro-series models): doses water with an accuracy of a milliliter, adjusting the intensity depending on the type of coating (parquet, tile, laminate).
• 🔄 Gravitational system (budget models): water comes by gravity, without flow control - requires manual adjustment in the application.
• 🧼 Vibrational mop (for example, in DreameBot) W10): The wipe vibrates at a frequency of up to 3000 vibrations per minute, removing dried spots without chemistry.

It is important to understand that wet cleaning ≠ Xiaomi robots do not replace manual cleaning with detergents, but they cope with dust, animal hair and fresh contamination. Persistent stains (such as coffee or juice) require pretreatment.

In flagship models (for example, Xiaomi Mi Robot Vacuum-Mop P) implemented technology “smart carpet recognition”: when you detect a fuzzy coating, the robot automatically lifts the napkin by 5 mm to avoid wetting the carpet.

2.Mapping and Zoning: How a Robot "Sees" Your Home

All of Xiaomi’s wet-cleaning robots are equipped with laser (LDS) or optical sensors to map the space, but the capabilities of these systems are very different:

The map you saved allows you not only to plan your routes, but also to divide your room into zones with different cleaning settings, for example, you can ask:

• 🚫 No-go zones (near the pet feeder or children's toys).
• 💦 Areas with enhanced wet cleaning (hallway, kitchen).
• 🌀 Double dry cleaning areas (carpets in the living room).

💡

If the robot is constantly "lost" in a large room, place a reflector beacon in the corner (companying with some models), which will help the sensors to determine the position more accurately.

In the Mi Home app (or Dreame for the respective models), the map can be edited manually: combine rooms, rename them, add virtual walls, which is especially useful for studios or rooms with complex layouts.

3. Cleaning modes: when and what to use

Most users are limited to the standard mode, but Xiaomi robots offer up to 5 different cleaning profiles:

1. Quiet mode (40 dB): Suitable for night cleaning, but reduces suction power by 30%.
2. Balance (55 dB): Optimal for daily cleaning – a combination of low noise and good efficiency.
3. Turbo (65 dB): Maximum suction for carpets or heavy contaminants.
4. Wet cleaning: combination of sweeping and wiping (water consumption ~15 ml / m2).
5. Deep cleaning (only in Pro models): two-pass mode with increased mop pressure.

For parquet and laminate, it is recommended to use the Wet Cleaning + Low Water Consumption (3-5 ml / m2) mode to avoid swelling of the joints. But for tile in the bathroom, you can turn on Deep Cleaning with a flow rate of up to 20 ml / m2 - the material is not afraid of moisture.

Note: in Turbo mode, battery life is reduced by 40%. If the apartment area is more than 80 m2, it is better to break the cleaning into two cycles or use a dock with self-charging (there are models Xiaomi S10+ and above).

4 Robot care: how to extend the life of wipes and filters

The life of a robot vacuum cleaner depends on regular maintenance, and here are the key points that are often overlooked:

• 🧽 Washing wipes for wet cleaning should be washed after each use (manually, at 30)°C without bleach. On average, one napkin can withstand 50-70 cycles.
• 🔋 Water tank requires weekly cleaning with vinegar solution (1:1 with water) to avoid mold.
• 🌀 Side brushes are clogged with hair - they need to be cleaned with scissors every 3-5 cleanings.
• 🚮 HEPA-The filter (if any) changes every 3 months, otherwise the robot will start to "dust" back into the room.

Check the side brushes for the presence of hair|Clean the main brush from wound threads|Rinse the water tank|Wipe the navigation sensors with an alcohol napkin|Update the firmware through Mi Home-->

One of the most common questions is, can you use detergents? Most models don't use detergents, but there's a workaround: add 1-2 drops of window washing (no abrasives!) to the water tank, which won't hurt the mechanism, but it can void the warranty.

⚠️ Attention: If the robot starts leaving the stains on the floor, check the hardness of the water. If it's above 8 mg-eq/l (hard water), a lime plaque forms on the napkin that scratches the glossy surfaces. Solution: use distilled water or add 1 tsp of citric acid to 1 liter of water.

5.Integration with a smart home: voice control and automation

Xiaomi’s robot vacuum cleaners are fully compatible with the Mi Home ecosystem, which opens up the possibility of complex automation, such as:

• 🗣️ Voice launch via Yandex Alice or Google Assistant: Alice, run a robot vacuum cleaner in the kitchen in wet cleaning mode".
• 🔄 Automatic cleaning after leaving home (by geolocation of the smartphone).
• 🌡️ Cleaning at high humidity (if connected to the sensor Xiaomi Temperature & Humidity Sensor).
• 🐕 Stop when motion is detected (integration with Xiaomi Mi Home Security Camera).

To set up automation, go to the Mi Home app, select Automation → Create → Condition → Device. For example, a scenario called Scheduled Weather-Specified Cleaning might look like this:

IFOR


Time = 10:00.




And Weather (according to Mi Weather) = "No precipitation"




Then




Launch a robot vacuum cleaner in Balance mode




Send notification: "The cleaning has begun"

In Matter-enabled models (such as the DreameBot X30), the robot can be connected to Apple’s HomeKit or Amazon’s Alexa without additional hubs, making it easier for users not using the Mi Home.

6. Comparison of models: which is right for you

Choosing a wet cleaning robot Xiaomi depends on the area of the apartment, the type of coatings and budget, and we compared the key models according to criteria important for Russian users:

For small apartments (up to 50 m2), Mi Robot Vacuum-Mop 2 Lite is enough - it is cheap and copes with basic tasks. Owners of large houses (100+ m2) with different types of coatings should consider the Xiaowa E35 - it has the best navigation and adaptive modes for carpets.

⚠️ Note: In models without the mop-up function (e.g. Mi Robot Vacuum-Mop 2 Lite), when wet carpets are harvested, the pile gets wet and can become a source of mold. Solution: manually remove carpets from the cleaning area in the app or use the dry cleaning mode only for these areas.

7 Life hacks and non-obvious chips

Even experienced users are unaware of some of the capabilities of Xiaomi's robot vacuum cleaners.-5 lifehacks:

1. Cleaning the contour of the walls: in the Mi Home application, you can turn on the Wall Follow mode so that the robot passes along the boards with increased care (useful for collecting webs and dust in the corners).
2. Nightlights: Some models (e.g. DreameBot) L10 Pro) equipped LED-They can be used as a nightlight if you put a robot by the bed and say, "Alice, turn on the vacuum cleaner light".
3. Remote control: If the robot is stuck, it can be “shake off” through the application – the Find Robot feature will make the device make a sound and flash lights.
4. Water saving: in Eco mode, water consumption is reduced to 2 ml / m2, which allows you to increase the harvesting area by 30% without refueling.
5. Cleaning under furniture: if the legs of the sofa are above 10 cm, the robot will crawl under it. To increase the clearance, you can remove the side brushes (the width will decrease by 2 cm).

Another useful trick is to use a robot to air, and if you place it in the open window in fan mode (DreameBot), it will circulate air, accelerating the renewal of the atmosphere in the room.

💡

The most useful hidden feature is manual control through the application, where in Manual Control mode, you can remotely guide the robot to hard-to-reach places (for example, under the bed) without moving furniture.

FAQ: Answers to Frequent Questions