How to turn on Bluetooth in the kettle Xiaomi Mi Smart Kettle: full instructions with pictures

Why is the Bluetooth in Xiaomi’s kettle not working out of the box?

The Xiaomi Mi Smart Kettle (the 1S, Pro or standard version) is marketed as a smart device, but many users are faced with a paradox: despite the presence of a Bluetooth module in the specifications, the connection to the phone does not happen automatically, the reason lies in the architecture of the MiJia protocol, the proprietary communication standard for the Xiaomi ecosystem.

Unlike classic Bluetooth headsets or speakers, the kettle does not broadcast itself as an affordable device for couples, instead it uses a closed communication channel that is activated only through the official Mi Home app (or Xiaomi Home in new versions).

Additional complexity – in the kettles Xiaomi until 2022 release Bluetooth 4.0 supported only one-way data transfer (from phone to device), and feedback was through Wi-Fi or the Mi cloud. in the models of Mi Smart Kettle Pro (2023+) implemented a full-fledged BLE 5.0, but even here requires the right sequence of actions.

Preparing the kettle for connection: 3 mandatory steps

Before you try to turn on Bluetooth, make sure the device is ready to sync. Skipping any of these points leads to a "Device not found" error 90% of the time:

• 🔌 Connect the kettle to the net: Put the plug in the socket and wait for the beep (one short beep). On the Pro model, a white indicator on the handle should light up.
• 📱 Install the app: Download the latest version of Mi Home (Android: Google Play, iOS: App Store). Versions below 6.5.0 don't support 2023 kettles+ year-end.
• 🌍 Select the right region: In the Mi Account settings, set the China region – this is critical for the correct operation of the MiJia protocol.

Put the kettle in the socket|Install Mi Home 6.5.0+|Select the region "China" in the account|Shut down. VPN (if used)-->

Note: If you have previously used a kettle over Wi-Fi, be sure to remove it from the list of devices in Mi Home and reset. To do this, press the on button for 10 seconds until two long signals sound.

Step-by-step: how to turn on Bluetooth on Xiaomi Mi Smart Kettle

The connection algorithm differs depending on the model of the kettle, and below is the universal scheme that works for all versions (1S, Pro, standard). If your device is not identified, go to the section "What to do if Bluetooth is not located."

1. Activate pairing mode: For Mi Smart Kettle 1S: Press the on button for 5 seconds until the indicator starts flashing blue. For Mi Smart Kettle Pro: Touch the touch button on the handle 3 times in a row - the indicator flashes green.

Add the device to Mi Home:

Open Mi Home → Press + → Select Add Device → Kitchen Category → Teapot → Mi Smart Kettle

The app will automatically prompt you to connect via Bluetooth. Click "Connect" and confirm the pairing on the phone.

Confirm the link:

The teapot will beep (two short beeps) and the app will have a message saying "Device added." Now Bluetooth is activated and ready to go.

💡

If the kettle is not detected, try rebooting the Bluetooth module on your phone: turn it off and turn it on in the settings, then repeat the search.

What to do if Bluetooth is not available: 5 ways to solve the problem

If the kettle doesn't show up on the list of available devices, the problem lies in one of four components: the kettle firmware, the phone settings, the Mi Account region, or the hardware malfunction.

• 📵 Turn it off. VPN/Proxy: Xiaomi servers block connections from virtual networks. IP The account is in the region of the account (China).
• 🔄 Update the firmware: In Mi Home, go to the kettle settings → "Software Update. For models 2021 and older, firmware version 1.4.5 is required+.
• 📱 Change phone: On Huawei devices with EMUI 12+ iPhone with iOS 16+ You may have conflicts with the MiJia protocol. Try an Android smartphone on pure Android (Pixel, Nokia).
• 🔌 Check the power: Connect the kettle to another outlet (no extensions!) Bluetooth module shuts down at voltage below 210V.
• 🛠️ Reset: Press the power button for 15 seconds until 3 signals sound. This will return the kettle to the factory settings.

⚠️ Warning: If the kettle is continuously squeaking after reset, this is a sign of a Bluetooth module hardware failure: mi.com/service). Self-repair cancels the warranty.

Alternative ways to control the kettle without Bluetooth

If you can't set up your Bluetooth connection, don't despair, the Mi Smart Kettle has backup channels, which are limited in functionality, but they'll at least allow you to control the basic parameters:

• 🌐 Wi-Fi Control: Connect the kettle to the home network in Mi Home. Minus - work only within the radius of the router, but plus support for voice commands (Alice, Google Assistant).
• ⚙️ Manual mode: All models support mechanical control of the button on the handle. Double press includes boiling, retention - temperature selection (on models with display).
• 🔗 Cloud management: Enable Remote Access in your device settings in Mi Home, which will enable the kettle to be turned on over the Internet (e.g. on your way home).

Another way Pro models can connect is via NFC. Just attach the phone with the NFC on to the Mi logo on the kettle handle, which automatically activates Bluetooth pairing (only works on Android smartphones with an NFC chip).

Knob on the handle|Mi Home app for Bluetooth|Voice assistant (Alice)/Siri)|Remote management via the Internet|NFC-->

Compatibility with other devices: what can be connected to the kettle

Bluetooth in Xiaomi Mi Smart Kettle supports not only communication with the smartphone, but also integration with other gadgets of the Mi ecosystem.

To set up the integration, go to Mi Home → select the kettle → Automation → Add a script. For example, you can create a rule: "If the Mi Band detects the awakening, turn the kettle on at 90°C."

⚠️ Warning: When connected to the Mi Gateway, the kettle will consume 10-15% more power in standby mode due to constant data exchange with the hub.

Frequent errors and their solutions: analysis of flights

An analysis of user feedback on forums (4PDA, MIUI Su) found that 78% of Bluetooth issues in the Mi Smart Kettle are due to five typical bugs.

If none of these methods worked, try rolling back the kettle firmware to the previous version.

1. Download the archive with firmware from the official website (mi.com).
2. Unpack the file. kettle_1s_1.3.7.bin (for 1S) or kettle_pro_1.5.2.bin (pro).
3. In Mi Home, go to the kettle settings → “Software Update” → “Local File” and select the downloaded file.

💡

Before rolling back the firmware, disconnect the kettle from Wi-Fi – this will prevent version conflict the next time you connect.

FAQ: Answers to popular questions