Connection of Xiaomi aerogrill to Wi-Fi: full instructions with photos and tips

Xiaomi’s aerogril is not just a kitchen assistant, but a full-fledged smart home device that works in conjunction with other gadgets of the brand. However, many users face difficulties when connecting to Wi-Fi for the first time: the app does not see the device, the indicator flashes red, or the connection is constantly reset. In this article, we will analyze all possible ways of connecting (via Mi Home, Google Home and alternative methods), and provide solutions for 90% of typical errors.

The peculiarity of Xiaomi aerogrills (Mi Smart Air Fryer, Mijia Air Fryer Pro, etc.) is that they use the 2.4 GHz Wi-Fi protocol, which is important to consider when setting up. If your router only works on 5 GHz, connection will not be possible. Also, the device requires binding to a Xiaomi or Google account, without this functionality will be limited.

1. Preparation of the aerogrill and router for connection

Before you start setting up, make sure your device and network meet the minimum requirements, which will save you 70% of the problems during the connection phase.

Router requirements:

• 📶 2.4 GHz network support (aerogril does not work with 5 GHz!).If you have a dual-band router, make sure the 2.4 GHz network is enabled and has a unique name (SSID), non-5 GHz.
• 🔒 No blockage on the basis of MAC-Some routers (like Keenetic) block new devices by default.
• 🌐 Internet connection: Aerogril checks Xiaomi servers when first connected.
• 🔄 Disable the “Band Steering” function – it can interfere with a stable connection.

Requirements for aerogril:

• 🔋 The device must be on the network and in standby mode (the indicator is lit blue or flashing orange).
• 📦 If the aerogrill is new, remove the protective film from the touch panel (it can block touches).
• 🔄 Reset to factory settings if the device has already been used: press the power button for 10 seconds until the indicator starts flashing quickly.

⚠️ Note: If your router uses a hidden network (Hidden) SSID), Xiaomi aerogrilis do not support connection to hidden networks during the setup stage.

2. Connect via the Mi Home app (main method)

This is the official and most reliable way, and Mi Home automatically identifies the aerogrill model and offers the latest firmware. 3.5L/5.5L Mijia Air Fryer Pro.

Step 1 Installation and Configure Mi Home

1. Download the Mi Home app from Google Play or the App Store.
2. Sign up or sign in to Xiaomi (required!) and use the same region as when you purchase your device (e.g. Russia or China).
3. Enable geolocation and allow the app to access Wi-Fi and Bluetooth.

Step 2: Adding a device

1. Click + → Add the device in the upper right corner.
2. Select the Kitchen category, then search for the Aerogril (or enter the model name manually).
3. Hold the phone to the aerogrill at a distance of less than 1 meter and wait for the sound signal.
4. Select your Wi-Fi 2.4 GHz network and enter your password. Make sure your phone is connected to the same network!

Step 3: Completion of the setup

• 🔄 Wait for firmware updates (may take up to 5 minutes!
• 📱 Once successfully connected, the device will appear in the Mi Home main menu, and now you can control your voice via Alice, Google Assistant or Siri.

Make sure the router is running on 2.4 GHz|

Turn off the VPN on your phone |

Enable Bluetooth and geolocation |

Place the air grill next to the router (within 2 meters)|

Check that your phone is on Wi-Fi (not mobile data)

-->

3. Alternative ways of connecting

If the Mi Home doesn't see the device or it's an error, try one of these methods. They work for most models, including the Mijia Air Fryer. 1C Mi Smart Air Fryer Pro.

Method 1. via Google Home (to integrate with the Google ecosystem)

• 📱 Install Google Home and sign in to your Google account.
• 🔄 In Mi Home, go to the aerogrill settings and select Add to Google Home.
• 🔗 Follow the instructions in Google Home to link your device.

Method 2. via Apple HomeKit (for iPhone users)

• 🍎 Open Mi Home, find the aerogrill in the list of devices.
• 🔑 Press Settings. → HomeKit and scan it QR-device-code.
• 🏠 Add the device to the Home app on your iPhone.

Method 3: Manual Wi-Fi data entry (for older models)

Some early versions of aerogrills (e.g. Mi Smart Air Fryer 2020) support manual network input:

1. Press and hold the Wi-Fi button on the air grill panel for 3 seconds until the indicator starts flashing blue-red.
2. On the phone, connect to the temporary network XIAOMI-XXXX (password usually 12345678).
3. Open your browser and go to 192.168.4.1.
4. Enter your 2.4 GHz network data and save your settings.

⚠️ Note: If the air grill does not connect after manual input, check if your router blocks devices with Chinese servers. Some providers (for example, Rostelecom) by default restrict access to foreign devices. IP.

Table of errors and their solutions

Here are the most common problems when connecting a Xiaomi aerogrill to Wi-Fi and how to fix them. If your error is not on the list, try resetting your router settings or updating the firmware of the aerogrill through Mi Home.

5.Setting up smart control after connecting

When the air grill is successfully connected to Wi-Fi, you can set up automation, voice control and remote access.

Voice assistants:

• 🎤 Alice (Yandex): Alice, turn on the aerogrill 180 degrees for 20 minutes".
• 🤖 Google Assistant: OK, Google, set the Fries mode in the aerogril"".
• 🍎 Siri: "Hey Siri, turn off the air grill in 10 minutes".

Automation in Mi Home:

• ⏰ Timers: Starting an aerogrill at a predetermined time (for example, when you return from work).
• 🔄 Scenarios: Linking to other devices (for example, turning on aerogrill when opening the Xiaomi refrigerator).
• 📊 Usage statistics: Tracking of operating times, electricity consumption and popular modes.

Remote access:

To control the air grill from anywhere in the world:

1. In Mi Home, go to the device settings.
2. Enable the Remote Access option.
3. Make sure your router does not block outbound connections (ports 80 and 443 should be open).

💡

If the aerogrill often disconnects from Wi-Fi, try fixing it MAC-address in the router settings. IP-addresses and loss of connection.

6. Update firmware and reset settings

Regular firmware updates fix connection errors and add new features (e.g. Matter support for compatibility with other ecosystems).

Step 1. Check the current version

1. Open Mi Home and select your aerogrill.
2. Go to Settings. → About the device.
3. Check out the current version of the firmware (for example, 1.2.3_0045).

Step 2. Update

• 🔄 If a new version is available, click Update.
• 🕒 The process will take 3-7 Don't turn off the air grill!
• 📱 After the update, the device will restart and the connection to Wi-Fi will be restored automatically.

Reset to factory settings

If the air grill is unstable or does not connect to Wi-Fi:

1. Turn the device off the socket.
2. Press the power button and connect to the network. Hold the 15-second button until the light flashes quickly.
3. After resetting, repeat the procedure of connecting to Wi-Fi.

⚠️ Warning: Reset removes all saved recipes and settings, including the link to the Xiaomi account.

💡

Updating the firmware through Mi Home is the safest way, as the app checks the compatibility of the version with your aerogrill model.

7. Compatibility with other ecosystems (Home Assistant, Yandex, Apple Home)

Xiaomi aerogrili can be integrated not only into the Mi Home, but also into other smart home systems.

1. Home Assistant (for advanced users)

• 🏠 Install the Xiaomi Miio component through HACS manually.
• 🔑 Get your device token with the Mi Home Token Extractor app (Android required).
• 📝 Add the device to Configuration.yaml:

fan.xiaomi_miio:


host: 192.168.1.100 # IP- address of aerogrill




token: YOUR_TOKEN_HERE




model: zhimi.airfryer.ma4

Yandex Ecosystem (Alice)

• 🔗 In Mi Home go to the settings of the aerogrill and select Add to Yandex.
• 📱 Confirm the binding in the Yandex application with the same account as on the phone.
• 🎤 Now you can control the device through Alice or the Yandex application.

3. Apple HomeKit (for iPhone)

• 🍎 In Mi Home, find the HomeKit Setup option in your device settings.
• 🔑 Scan it. QR-code from the air grill body or enter the pin code manually.
• 🏠 The device will appear in the Home app and will be available for management via Siri.

Important: Integration with HomeKit requires a Matter-enabled aerogrill model (e.g. Mijia Air Fryer Pro 2023 and later). Older devices are incompatible.

8. Frequent Questions and Answers (FAQ)