Xiaomi TV 2 SE: How to connect to the Internet, phone and other devices

Xiaomi TV TV 2 SE — Popular model with support for Smart TV, Many users have difficulty in their first run: Wi-Fi can't find the network, the cable can't be identified, the Mi Account is not tied. In this article, we will discuss all possible ways to connect over the wire and without, and also explain how to synchronize your TV with other Xiaomi gadgets to create a single ecosystem.

Features of Xiaomi TV 2 SE — flexibility of settings, but it also makes it difficult for beginners. HDMI-CEC You can control your TV from the console, and integration with Mi Home allows you to access voice control through Alice or Google Assistant. We have compiled proven instructions with the latest firmware updates from 2026 so you can configure the device without errors.

Preparation for the first connection

Before turning on the TV, make sure all cables and accessories are in place. complete with Xiaomi TV 2 SE must:

• 📺 The TV itself with a protective film on the screen (you can remove it after installation!).
• 🔌 Power cable (standard) EU/US depending on the region).
• 🎮 Remote with batteries (usually) AAA).
• 📄 Warranty card and brief instructions (in several languages, including Russian).

If you bought a TV separate from a stand, check the mount compatibility. for Xiaomi TV 2 SE standard VESA 200×200 or VESA 300×300 (depending on the diagonal:

• 🔄 HDMI-cable (version 2.0 or higher) 4K).
• 🌐 Ethernet cable (if you plan to connect wired).
• 📱 Smartphone with Mi Remote app installed (for alternative management).

⚠️ Warning: Do not connect the TV to 220V immediately after delivery in the cold season. Let it heat up to room temperature for 1-2 hours to avoid condensation inside the case.

Place the TV on a flat surface, making sure the air vents (usually on the back) are not covered. For wall mounts, use only certified brackets - Xiaomi weight TV 2 SE varies from 7 to 15 kg depending on the diagonal.

Connecting to the Internet via Wi-Fi

Wireless connectivity is the most popular way, but it requires the router to be set up correctly. - Xiaomi TV 2 SE Supports Wi-Fi 5 standards (802.11ac) and Wi-Fi 6 (802.11ax) And we're going to use 2023-2026 models to connect:

1. Turn on the TV with a button on the remote or on the back panel.
2. Select the interface language (Russian is available by default).
3. In the initial settings menu go to the Network section → Wireless network (Wi-Fi).
4. Select your network from the list. If it is not available, click Update List or check if the router is on Wi-Fi.
5. Enter the password (registration is important!) and confirm the connection.

If the TV is not connected, try the following steps:

• 🔄 Restart the router (turn off power for 30 seconds).
• 📶 Check if the router is running mode. 802.11n Only - it can block new devices.
• 🔒 Make sure that the password does not contain Cyrillic characters or spaces.
• 📡 If you use a dual-band router, try connecting to a 2.4 GHz network (sometimes 5 GHz is unstable).

⚠️ Note: On some of the firmware Xiaomi TV 2 SE A bug is created that connects to networks whose name contains spaces or special characters (for example, My_Wi-Fi!). Rename the network to Latin without signs.

After successful connection, the TV will automatically check for software updates. If an update is found, do not interrupt the process - this can lead to a system failure and the need to reset to factory settings.

Wired connection (Ethernet)

If Wi-Fi is unstable or you plan to use the TV for online gaming (e.g. via Google Stadia or Xbox Cloud Gaming), it is better to use cable. TV 2 SE ported RJ-45 speeds up to 1 Gbps.

Instructions for connection:

1. Connect the TV to a router or modem Cat cable 5e higher.
2. Go to Settings. → Network → Wired network.
3. Select DHCP (Automatic IP Receiving) or enter options manually if your ISP requires static IP.
4. Confirm the settings and wait for the message "Connected".

If the TV does not detect the cable:

• 🔌 Check if the cable is damaged (try another one).
• 🔄 Restart router and TV.
• 🛠️ Update the router’s firmware (outdated models may not support Gigabit Ethernet).

💡

If you have slow internet connection, try to turn off IPv6 In settings of the TV network - this sometimes solves problems with hanging.

Connecting to Mi Account Account

Without being linked to your Mi Account, you will not be able to use Xiaomi’s branded services, such as Mi Home, Mi Video or cloud storage.

1. Open Settings → Accounts and Security → Mi Account
2. Select Login and Enter email/Phone and password from your Xiaomi account.
3. Confirm your login via SMS or email (if two-factor authentication is enabled).
4. Allow access to TV data (this is necessary for synchronization of settings).

If you do not have an account, register it directly on your TV or through account.xiaomi.com. When registering, specify a real email - it will be necessary to restore access.

⚠️ Note: Xiaomi TVs sold in China may have regionally restricted firmware installed, and if you log in to Mi Account, you will need to change region to Russia or Global via the service menu.

After authorization, you will have access to:

• 📁 Cloud storage for screenshots and screen recordings.
• 🔄 Synchronize settings between Xiaomi devices (e.g. saved Wi-Fi networks).
• 🎬 Mi Video and Mi Music services with personalized recommendations.

Connecting to the phone and other devices

Xiaomi TV 2 SE Supports several ways to interact with other gadgets: through Mi Share (fast file transfer), HDMI-CEC (One remote control and Google Cast, and we'll look at each option.

1. File transfer over Mi Share

To send photos, videos or music from your phone to your TV:

1. Make sure that both devices are connected to the same Wi-Fi network.
2. On the TV, open Settings. → Connections → Mi Share and turn on the function.
3. On a smartphone (Xiaomi, Redmi or POCO) Open the Gallery, select files and click Send → Mi Share.
4. Select the TV from the list of available devices.

2. Telephone control

Download the Mi Remote app (available for Android and iOS) and follow the instructions:

• 📱 Open the app and select Add the device → Television → Xiaomi.
• 🔍 Point the phone camera to the TV to automatically connect to the IR.
• 🎮 Now you can use your phone as a remote, including voice input.

3. Screen broadcast (Google Cast)

To broadcast the screen of a smartphone or PC:

1. On the TV, turn on Settings → Connections → Google Cast.
2. On your smartphone (Android), lower the notification curtain and click Broadcast (or Screen Mirroring on your iPhone).
3. Choose Xiaomi TV 2 SE list.

⚠️ Note: When streaming from iPhone, there may be a delay of up to 2 seconds. To reduce lag, connect the phone and TV to the router via cable (if Ethernet is supported on the phone via an adapter).

💡

For stable broadcasting on Google Cast, the Wi-Fi speed should be at least 15 Mbit / s. At a lower speed, slowdowns are possible.

Connecting peripheral devices

Xiaomi TV 2 SE supports the connection of keyboards, mice, gamepads and even webcams through ports USB Or Bluetooth. Here's how to do it:

1. USB-device

• 🖱️ Mouse/keyboard: Connect to any USB-Port (usually sideways) Drivers are automatically installed.
• 🎮 Gamepad: Xbox or PlayStation controllers may require a Bluetooth adapter.
• 📁 Flash drive/external HDD: format in FAT32 or NTFS compatiblely.

2. Bluetooth devices

1. Open Settings → Bluetooth and turn on the search.
2. Transfer the device (for example, wireless headphones) to pairing mode.
3. Select it from the list and confirm the connection.

To connect a webcam (for example, for Zoom or Skype):

• 📹 Connect the camera to USB-port.
• Install the Google Duo or Skype app from Google Play.
• In the application settings, select the connected camera as the video source.

Solving common problems

Even after the right connection, there can be failures, and here are the most common problems and solutions:

1.The TV does not find the Wi-Fi network

• 🔄 Restart router and TV.
• 📡 Check if the network is hidden (in the router settings, disable the option "Hide". SSID").
• 🛠️ Update the TV firmware (Settings) → On TV. → Updating the system).

2. no sound when connected through HDMI

• 🔊 Check if the correct sound source is selected in Settings → Sound. → Exit.
• 🔄 Reconnect. HDMI-cable (sometimes it helps to change the port).
• 🎵 If you have a sound bar connected, make sure that the settings are in place. HDMI chosen ARC eARC.

3: Google Cast is not working.

• 🌐 Make sure your phone and TV are on the same network.
• 🔄 Turn it off. VPN on the phone (it can block local connections).
• 📱 Update the Google Home app on your smartphone.

4.The remote does not respond to pressing

• 🔋 Replace batteries (even if they are new – sometimes factory defects).
• 📶 Check if there is interference from other IR devices (e.g. air conditioning).
• 🔄 Reboot the TV with a button on the back.

FAQ: Frequent questions