Bluetooth is not enabled on Xiaomi: all the reasons and ways to fix

You're trying to connect headphones, a speaker or a fitness bracelet to Xiaomi, but the Bluetooth module stubbornly doesn't turn on? a gray button, the device doesn't find other gadgets and a reboot doesn't help? This problem is found on models from Redmi Note 10 to Xiaomi 14 Ultra, and there can be more than a dozen reasons - from firmware bugs to physical antenna damage.

In this article, we'll look at all the possible reasons why Bluetooth doesn't work on Xiaomi, from the commonplace user errors to the hidden developer settings. You'll learn how to diagnose a problem in 2 minutes, what engineering menu codes will help check the hardware, and what to do if the smartphone doesn't see other devices even after a reset. And at the end, an FAQ with answers to frequent questions and a survey that will help us gather statistics on the prevalence of the problem.

⚡ Spoiler: 60 percent of the time, it's not hardware that's to blame, but software failure or application conflict. But if your Xiaomi falls from a height or has been in the water, the chances of a software solution drop dramatically.

1. Checking basic settings: what you might have missed

Before you dig deeper, make sure the problem isn't a simple mistake. Here are 4 points of control that are often ignored:

• 🔄 Flight mode: Bluetooth is locked along with Wi-Fi and mobile network. Check the top notification bar - if there is an airplane icon, turn it off in Settings → SIM-maps and mobile networks → Flight mode.
• 🔋 Energy Saving: Xiaomi with the MIUI 12+ Aggressive battery settings may turn off communication modules. → Battery. → Power saving mode and select "Performance".
• 📱 Geolocation: Some Bluetooth features (such as Mi Band or Smart Lock) require enabled GPS. Check in Settings → Confidentiality → Permits → geodata.
• 🔒 Application restrictions: If you are trying to connect via an app (like Zepp Life for Mi Band), make sure it has Bluetooth access in Settings. → Annexes → Permit management → Bluetooth.

💡 Advice: On models POCO X3, Redmi 9 and older has a bug when Bluetooth shuts down after connecting to Mi TV. Try to disconnect the TV from the network and restart the phone.

2. Software glitches: how to "resuscitate" Bluetooth without resetting

If the basic settings are fine, but the module still doesn't turn on, the problem lies in the system software. Here are 5 ways to get it back up without losing data:

Rebooting system services

MIUI has a hidden reset feature that often helps with Bluetooth hanging:

1. Open the dial and enter the code: ##4636##.
2. Select Phone Information (or Usage statistics on global firmware).
3. Press. ⋮ → Resetting statistics Wi-Fi/Bluetooth.
4. Reboot the phone.

2.2. Cleaning up the Bluetooth cache

A cluttered cache can block the module from working, so it can be reset.

1. Go to Settings → Applications → Application Management.
2. Press. ⋮ → Show system-based.
3. Find Bluetooth (or com.android.bluetooth), open it.
4. Click Warehouse → Clear the cache and Clear the data.

Clear the Bluetooth cache|Reboot the phone|Check flight mode.|Shut down. VPN (if used)|Remove Problem Associated Devices-->

⚠️ Warning: Once the data is cleaned, all the associated devices (earphones, speakers, bracelets) will be removed.

Conflict with annexes

Some programs (especially VPNs, antiviruses, or launchers) block Bluetooth to find the culprit:

1. Go to Security → Permits → Autostart.
2. Turn off auto-start for all suspicious applications.
3. Restart your phone and check Bluetooth.

If the problem has disappeared, turn on auto-run one at a time to determine the "culprit".

3. firmware update: when bugs fix Xiaomi

MIUI 13.0.4–13.0.7 firmware for the Redmi Note 11 and POCO F4 had a critical bug that shut down Bluetooth after 10 minutes of use. Xiaomi only fixed it in version 13.0.9. If your phone hasn't been updated for a long time, the first recommendation is to install the latest firmware.

How to check and update:

1. Go to Settings → About the phone → System update.
2. Click Check for updates.
3. If a new version is available, download and install it.

⚠️ Note: If Bluetooth stopped working after the update, try to roll back to the previous version via Fastboot. MIUI.

4.Settings reset: Last chance in front of service center

If none of these things work, it's a hard reset, it'll delete all the data from the phone, but it'll return the factory Bluetooth settings.

How to reset your settings:

1. Go to Settings → About Phone → Backup and Reset.
2. Select Settings Reset.
3. Mark Clear all data and confirm the action.
4. After the reboot, set the phone up as new and check Bluetooth.

💡 If you’re afraid of losing data, try resetting only your network settings (in the same menu) first, which will remove stored Wi-Fi and Bluetooth devices, but leave photos and apps behind.

5. Hardware malfunctions: when the "iron" is to blame

If the software didn't work, the problem is physical damage. Here are the 3 most common cases:

• 💧 Moisture intrusion: Even if the phone hasn't sunk, condensate or high humidity can oxidize the Bluetooth module contacts. check the moisture indicator (usually under the tray) SIM-If it is red, bring it to the service.
• 🚀 Fall or impact: The Bluetooth antenna is located near the top of the board.Blows to this place often lead to a break in the tracks or the chip is soldered off.
• ⚡ Overheating: If the phone overheated frequently (e.g. during games), the module's power controller could fail.Symptom: Bluetooth turns on but immediately shuts off.

How to check the hardware:

1. Enter the code in the dial: ##4636## → Phone information.
2. Scroll down to the Bluetooth block.
3. If the Unavailable or Error status is not correct, the module is defective.

💡

If Bluetooth turns on but shuts off, try plugging your phone into a charger, and if the module is running, the power controller is a problem, and you need to change it.

6. Specific problems for different Xiaomi models

Some Xiaomi models have unique Bluetooth bugs.-5 "Problem devices and their features:

🔍 Diagnostics for advanced: If you are confident in your abilities, you can check the operation of the Bluetooth module through the ADB. Connect your phone to your PC and execute the command:

adb shell dumpsys bluetooth_manager

If the output is State: OFF despite being enabled, the problem is in the system service.

7. Alternative ways to connect if Bluetooth is not working

While you are looking for a solution, you can use workarounds to connect devices:

• 🎧 Headphones: If you support 3.5mm jack or USB-C, Use a wired connection. TWS (For example, Redmi Buds 4) you can buy a Bluetooth adapter (costs ~500 ₽).
• 📱 Smart watches/bracelets: Some Mi Bands support connectivity via NFC (For example, Mi Band 7 Pro, check the instructions for the device.
• 🔊 Columns: Use Wi-Fi Direct or connect via Aux cable. for example, Xiaomi Mi Portable Speaker supports both options.
• 🚗 Car magnet: If there is one in the car USB-Port, connect your phone over the wire and use Android Auto or Mi Car.

⚠️ Note: If you use a Bluetooth headphone receiver, you may experience a delay in sound (~200 ms. This is normal for these devices.

💡

Before buying alternative accessories, check whether your Xiaomi model supports USB OTG (for wired headphones) or Wi-Fi Direct (for speakers).

FAQ: Answers to Frequent Questions