Xiaomi’s No Supported Application for This NFC Tag – Why It Happens and How to Eliminate It

You are trying to touch Xiaomi smartphone NFC-a tag, bank card or turnstile, but instead of the expected action, see the message "No supported application for this" NFC This error means that the system was unable to determine which application should process the signal from the tag, and the reasons may lie in the settings of the phone, the label itself or its format.

In this article, we will analyze all possible scenarios in which a problem arises - from the banal disconnected NFC before-fluid MIUI. You will learn how to diagnose a malfunction, which applications are responsible for processing NFC-We're going to look at the tags on Xiaomi, and what to do if you make a mistake when you pay, read your transport cards, or interact with smart devices. NXP (Xiaomi 13 Pro or Redmi Note 12, where the problem is often driver-related.

What is the error "No supported application for this NFC tag"

Message “No supported application for this NFC tag is the standard Android response when it cannot match the data it receives with the NFC-Not with any app installed, unlike errors like NFC tag not recognized (label not recognized), here the problem is not in the hardware, but in the software processing.

Technically, when you bring your phone to the tag, the chip NFC reads it UID (unique identifier and data (e.g, NDEF-Then the system looks for applications registered to process this data. If there is no suitable one, an error appears:

• 📱 There is no application (for example, for payment – Google Pay, for transport – World Pay or Troika).
• 🔧 NFC-The label is written in a non-standard format (for example, Mifare Classic instead of the standard format). NDEF).
• 🛠️ Failure to serve NFC (for example, after updating MIUI or reset).
• 📲 Firmware conflict (relevant for models with a chip) NXP PN80T, Where drivers may not work properly).

It's important to understand that an error doesn't always mean a breakdown, for example, if you bring your phone to the Mi Band tag without the Mi Fitness app installed, the system logically won't find the handler, but if you have a problem with your credit card or your travel card, that's a cause for diagnosis.

The reasons for the error on Xiaomi smartphones

On Xiaomi devices, the “No supported application” error is most often due to one of the following reasons: We have divided them into software (which can be fixed independently) and hardware (requires service center intervention).

Especially often, the problem occurs after a firmware update when NFC drivers are not compatible with the new version of MIUI. For example, Xiaomi 13 Ultra users complained about an error after upgrading to MIUI 14 - in this case, a rollback to the previous version or manually installing drivers through ADB helps.

⚠️ If the error occurred after a phone drop or battery replacement, there is a high probability of physical damage. NFC-In this case, the software won't help, you need a diagnostic at the service center.

How to check if NFC works on Xiaomi

Before you start correcting the error, make sure that NFC-The phone's module is functioning at all:

1. Turn on NFC in settings: Go to Settings → Connections and Sharing → NFC and activate the switch. On some models (e.g. POCO F4), the path may be different: Settings → Wireless Networks → Additional → NFC.
2. Check the reading of the standard tag: Bring the phone to any NFC-A tag (e.g., a bank card or a sticker from a smart lamp kit) if any reaction (vibration, sound, notification) appears, the module works.
3. Use the test app: Install NFC Tools or NFC Check from Google Play, and they will show you if the phone recognizes the tag and what their UID is.

If it turns out that NFC is not turned on at all (the switch is inactive or immediately switched off at the check stage), the problem may be:

• 🔋 Discharged battery (on some models) NFC shut off).
• 📱 Failure in firmware (helps reset settings or flashing).
• 🛠️ Damaged chip (required repair).

Correcting an Error for Bank Cards and Payments

If the “No supported application” error appears when you try to pay by phone (via Google Pay, SberPay, or World Pay), the problem is usually related to:

• 💳 Incorrectly added card in the payment application.
• 📱 Lack of rights to work with NFC.
• 🔄 Conflict with other payment services (for example, if both Google Pay and Samsung Pay are installed).

Step-by-step correction instructions:

1. Remove and add the card again: Open a payment app (like Google Pay), delete the problem card and add it again. Make sure the bank supports contactless payments via NFC.
2. Set up the default app: Go to Settings → Apps → Default Apps → NFC and select your payment service (like Google Pay).
3. Clear the cache and data NFC-Services: In the settings, find the NfcService app (or NFC), Clean his cache and his data, then restart the phone.
4. Check regional settings: Some banking applications (e.g. World Pay) require that your phone have a Russian location. Go to Settings → Additional → Language and Region and select Russia.

If the problem persists, try an alternative payment app, such as SberPay or Tinkoff Pay instead of Google Pay, which sometimes works better with NXP chips on Xiaomi.

💡

If you don’t pay in the subway or store, try turning off the energy saving for your payment app. Go to Settings → Battery → Energy Saving → Apps and add Google Pay to exceptions.

Solution for transport cards (Troika, Strelka, Mir)

An error when reading transport cards (for example, Troika or Arrow) is usually due to the fact that:

• 🚇 No official application has been installed (for example, Metro Moscow or Transport Card).
• 📱 NFC run-in HCE (Host Card Emulation that conflicts with physical cards.
• 🔄 The card is damaged or blocked (for example, after repeated use).

How to set up a phone to work with transport cards:

1. Install the official app: Moscow Metro Moscow, St. Petersburg Porodnik, Kazan Transport Map, without these applications, the system will not be able to process the map data.
2. Turn off HCE mode (if enabled): In some firmware, MIUI NFC defaults to card emulation mode, which prevents physical tags from being read. To turn it off, go to Settings → NFC → Additional and deactivate the Card Emulation (or HCE) option.
3. Check card compatibility: Not all transport cards are supported by smartphones. For example, older Troika cards (released before 2018) may not be readable on new Xiaomi models with the NXP PN80T chip.

If the card is not readable, try forcefully restarting the NFC service:

adb shell am force-stop com.android.nfc


adb shell am start -n com.android.nfc/.NfcMainActivity

These teams are rebooted. NFC-It's a module without restarting the phone. It's going to require the debugging on to do it. USB and PC connection.

⚠️ Note: Some transport applications (e.g. Metro Moscow) require permission to access geodata. If it is disabled, the map will not be read.

Problems with smart devices and tags

If the error occurs when interacting with smart devices (Yeelight lamps, Aqara locks, Mi Band tags), the reason is usually:

• 💡 Lack of a proprietary app (e.g. Mi Home for Xiaomi devices).
• 📱 Protocol incompatibility NFC (For example, the tag is recorded in Mifare Ultralight, and the phone supports only NDEF).
• 🔄 Conflict with others NFC-tags (if several devices are nearby, the phone may read the wrong label).

Instructions for setting:

1. Install the official app: For Xiaomi devices, it's Mi Home, for Aqara, for Aqara Home, for Yeelight, for Yeelight, without them, the phone won't be able to recognize the tag.
2. Check the label format: Some smart devices use closed protocols. For example, Aqara locks require Mifare Classic labels, which not all Xiaomi smartphones support.
3. Update the firmware of a smart device: Sometimes the problem is solved by updating the firmware tag or the device itself (for example, Yeelight lamp).

If the tag is still not recognized, try writing it back with the NFC Tools app.

1. Open NFC Tools and select Write.
2. Specify the type of data (such as URL or Text).
3. Hold the phone to the tag and wait for the recording to be completed.

Additional methods of error elimination

If standard methods didn’t help, try advanced methods that often solve the problem at the system or firmware level.

Resetting network settings often helps if an error appears after an update.

1. Go to Settings → About the phone → Reset settings.
2. Select Network Resetting.
3. Confirm the action and restart the phone.

If the problem is with NFC drivers (relevant to models with NXP chips like the Xiaomi 12 Pro or Redmi K60), you can try reinstalling them via ADB:

adb shell pm uninstall -k --user 0 com.android.nfc


adb shell pm install-existing com.android.nfc

These teams will reinstall the standard NFC-Attention: this requires an unlocked bootloader and enabled debugging on USB.

💡

If the error occurred after the MIUI update, try resetting the network settings first, and in 70% of cases, this solves the problem without complex manipulation.

FAQ: Frequent questions about the NFC error on Xiaomi