How to connect Xiaomi wireless headphones to your phone, laptop or PC: full instruction

Xiaomi’s wireless headphones are some of the most popular accessories, thanks to a combination of price, sound quality and convenience. However, even with these devices, users often have difficulty connecting for the first time. Some can’t find the headphones on the list of available devices, some have them go off after a few seconds, and some just don’t know which button to start with.

In this article, we will analyze all possible ways to connect Xiaomi wireless headphones - from budget Redmi Buds to flagship Xiaomi FlipBuds Pro. We will show you how to connect them not only with a smartphone, but also with a laptop on the phone. Windows/macOS, And we'll also solve the typical problems that are getting in the way of a stable job, and if you've just unpacked a new pair of headphones and you don't know what to do next, you're in the right place.

Particular attention will be paid to models with Bluetooth support 5.2/5.3, Because they require specific settings to maximize connection stability, we also look at how to update the firmware of the headphones if they don't work properly, and what to do if one of the headphones suddenly stops connecting.

1. Preparation of headphones for the first connection

Before you connect your headphones to your phone or computer, you need to turn them on and pair them correctly, a step that is often overlooked, which means that the device doesn't appear on the list of available devices.

Depending on the model, the process may slightly differ, but the general scheme is as follows:

1. Get your headphones out of the case (if that's it) TWS-model).
2. Make sure they are charged (the indicator on the case should burn or blink).
3. Press the on button (or touchpad) for 3-5 seconds until the indicator flashes red and white (or just white – in some models).

Xiaomi AirDots Pro 2 and FlipBuds Pro to activate the pairing mode you need to press and hold the touch panel on both headphones simultaneously for 3 seconds. Redmi Buds 3 Lite just once press the button on the case.

Important: If the light flashes only red, the headphones are discharged. Connect the case to charge for 10-15 minutes and try again.

2. Connect to Android smartphone (including Xiaomi, Redmi, POCO)

Pairing with an Android phone is the easiest way, especially if you have a device of the same brand. Xiaomi has optimized the process for its smartphones, so the headphones connect almost automatically.

Instructions for most models:

1. Open the Settings. → Bluetooth on your phone.
2. Activate Bluetooth (slider in the top position).
3. Remove the headphones from the case and put them in pairing mode (see section above).
4. In the list of available devices, find the name of your model (for example, Redmi Buds 4 or Mi True Wireless Earphones 2) and tap it.
5. Confirm the connection if a request is made.

On smartphones. Xiaomi/Redmi/POCO s MIUI 12 And later, a pop-up window may appear with a proposal to install the Mi Earphones app (or Xiaomi Earphones for new models), its installation is optional, but it is recommended for access to the new model:

• 🎛️ Set up equalizer and sound profiles.
• 🔋 Display the charge level of each headphone.
• 🔄 Update of firmware (if available).
• 🎧 Adjustment of sensory gestures.

A unique feature for Xiaomi owners: if your phone supports Mi AI Assistant, headphones can connect automatically when the cover of the case is first opened (the function does not work on all models).

3. Connection to iPhone (iOS) and features of the work

While Xiaomi doesn’t optimize its headphones specifically for iPhones, they work perfectly with Apple devices via the standard Bluetooth protocol. A2DP. However, there are a few nuances:

Step-by-step:

1. Open the settings → Bluetooth on the iPhone.
2. Activate Bluetooth.
3. Put the headphones in pairing mode (see section 1).
4. In the list of Other devices, find your model (the name may appear as Mi True Wireless or Redmi Buds) and tap it.

What's important to know:

• ⚠️ The iPhone will not display the charge level of the headphones (unlike AirPods).
• 🎵 Some models (such as Xiaomi Air 2 Pro) support codecs. AAC, What Provides Good Sound Quality on iOS.
• 🔊 The transparent mode (for conversations) and noise reduction functions may not work smoothly.
• 📱 To control playback you will have to use touch gestures on headphones (pause, next track, etc.).

If the headphones are connected, but the sound is interrupted or there are delays, try:

1. Disable Bluetooth on other devices nearby.
2. Reboot the iPhone.
3. Forget the device in Bluetooth settings and connect again.

💡

On the iPhone, you can use the AirBattery app from the App Store to track the charge level of Xiaomi headphones (does not work with all models, but supports most models). TWS).

4. Connect to a laptop or PC (Windows 10/11, macOS)

Pairing with a computer is a little more difficult than with a smartphone, especially if you're using Windows. Often problems arise from outdated Bluetooth adapter drivers or conflicts with other devices.

For Windows 10/11:

1. Press Win + I, select Devices → Bluetooth and other devices.
2. Turn on Bluetooth (if it is turned off).
3. Click Add Add the device → Bluetooth.
4. Put the headphones in pairing mode.
5. Choose your model from the list.

If the headphones are not displayed:

• 🔄 Reboot the Bluetooth adapter in Device Manager.
• 🔧 Update drivers (download from the laptop manufacturer’s website or use Driver Booster).
• 🚫 Remove all previously connected devices with similar names.
• 🔌 Try using an external Bluetooth adapter (if the built-in is outdated).

For macOS:

1. Open System settings → Bluetooth.
2. Press Turn Bluetooth on.
3. Put the headphones in pairing mode.
4. Select them in the list and click Connect.

⚠️ Note: On a Mac, some Xiaomi models (such as AirDots 3 Pro) can connect as an input device (microphone) and an output device (dynamics) separately.

5. Solving common connection problems

Even after successful pairing, users are faced with common errors, and we'll look at the most common ones and how to fix them.

Problem 1: Headphones are connected, but immediately switch off

Causes and solutions:

• 🔋 Low battery charge - charge the case and headphones.
• 📱 Conflict with other devices – disable Bluetooth on all gadgets except the current one.
• 🔄 Firmware failure - reset the headphones to factory settings.
• 🛠️ The problem with the phone's Bluetooth module - restart the device.

Problem 2: One earphone is not working

What to do:

1. Check if the contacts on the headphone and in the case are clean (wipe with an alcohol napkin).
2. Place both headphones in the case for 10 seconds, then pull out.
3. Reset the settings (see spoiler in section 1).
4. If nothing helps, the battery may fail or the speaker may be damaged.

Problem 3: The sound is interrupted or delayed

Possible causes:

• 📶 Weak Bluetooth signal – bring your phone closer to your headphones.
• 🎵 Incorrect codec - in the developer settings (Settings) → The phone. → Build number, tap 7 times) select Bluetooth Audio Codec → AAC or SBC.
• 🔌 Interference from other devices – turn off the 2.4GHz Wi-Fi router or microwave.

⚠️ Note: If audio delays only appear in games or videos, the problem may be in the insync of audio and video. Try using wired headphones or check the player's settings (for example, in the video). VLC You can manually adjust the sound delay).

💡

If Xiaomi headphones do not connect to the device, in 90% of cases, resetting to factory settings helps + reboot of phone/computer.

6. Sound tuning and additional functions

Once successfully connected, you can optimize the sound and use all the features of the headphones, and for this it is recommended to install the official Xiaomi Earphones app (available for Android).

What can be configured in the application:

• 🎛️ Equalizer – select a pre-profile (Bases, Clear Sound, Voice) or create your own.
• 🔊 Noise suppression (ANC) — Turn on/off or set the level.
• 👂 Transparent mode - useful for conversations without removing headphones.
• 🎧 Touch gestures – reassign actions (such as double tapping to pause or call a voice assistant).
• 🔋 Charge display – battery level of each headphone and case.

For models with hardware noise cancellation (for example, Xiaomi FlipBuds Pro) in the application, additional settings are available:

• 🔇 Level adjustment ANC (Weak/Mediternary/Strong).
• 🎤 Customizing the microphone for calls (noise suppression on transmission).

How to update the firmware headphones:

1. Open the Xiaomi Earphones app.
2. Put the headphones on the phone.
3. If an update is available, a notification will appear – follow the instructions on the screen.
4. Do not turn off the headphones or close the app until the process is complete.

⚠️ Attention: Updating the firmware can take up to 10 minutes. If you interrupt the process, the headphones may stop turning on.

7. How to turn off and reconnect the headphones

If you need to temporarily turn off your headphones or reconnect them to another device, do the following:

Disconnection:

• Place the headphones in the case - they will automatically turn off.
• Or manually disable them in the Bluetooth settings on the device.
• On some models, you can hold the touch panel for 2 seconds to turn off.

Reconnect:

1. Get the headphones out of the case – they should automatically connect to the last device.
2. If this does not happen, turn on Bluetooth on your phone/computer and select the headphones in the list.
3. To connect to the new device, put the headphones in pairing mode (see section 1).

How to reconnect the headphones to another device:

If the headphones have already been paired with one gadget, but you want to use them with another:

1. Disconnect them from the first device (in Bluetooth settings, click Forget the device).
2. Put the headphones in pairing mode.
3. Connect to the new device.

Some models (e.g. Xiaomi Air 2) SE) They have multi-connection, and you can connect them to your phone and your laptop at the same time:

1. Connect the headphones to the first device.
2. Without disabling them, activate Bluetooth on the second device and connect.
3. To switch between devices, use touch gestures or Bluetooth settings.

8 Useful Operational Tips

To make headphones last longer and work steadily, follow these recommendations:

Headphone care:

• 🧼 Wash your headphones and case with a dry soft cloth (do not use alcohol or wet wipes for the screen).
• 🚫 Do not leave them in direct sunlight or near heat sources.
• 🔌 Charge the case with the original cable or certified USB-Type-C.
• 💧 Avoid getting moisture, even if the model has protection. IPX4.

How to extend the working time:

• 🔋 Turn off your headphones when not using (put in your case).
• 📴 Reduce the volume – at the maximum level, the battery sits down 2 times faster.
• 🎵 Turn off noise cancellation if you don’t need it (this is an energy-intensive feature).

Safety:

• 🚗 Do not use headphones while driving or crossing the road.
• 👂 Take breaks every 1-2 hours to avoid hearing fatigue.
• 🔊 Do not listen to music at volumes above 60% for more than 30 minutes in a row.

⚠️ Note: If Xiaomi headphones are no longer holding charge (discharge in 1-2 hours), this may indicate battery wear.

💡

To quickly find a lost earpiece (if the model supports), use the device search feature in the Xiaomi Earphones app. The earpiece will emit an audible signal at low volume.

FAQ: Frequent questions about connecting Xiaomi headphones