How to set up mobile Internet “Phoenix” on a Xiaomi smartphone: the full guide 2026

Setting up mobile Internet from Phoenix on Xiaomi smartphones (including the Redmi, POCO and Mi lines) often raises questions among users. Although the process seems simple, incorrect APN settings (Access Point Name) can lead to no communication, slow speed or inability to send MMS. In this article, we will analyze all possible configuration methods from automatic installation to manual settings, and also consider typical errors and their solutions.

The Phoenix operator’s special feature is the use of a virtual network (MVNO), And that sometimes requires specific settings other than the standard MTS, Beeline or MegaFon. SIM-Card or have encountered problems after updating MIUI, The following instructions will help restore access to the mobile Internet, and it is important to note that the algorithm may vary slightly depending on the firmware version (MIUI 12/13/14) device models.

1. Preparation of Xiaomi smartphone to set up the Internet

Before you start an APN configuration, make sure your smartphone is ready for the changes.

• 📱 Check compatibility. SIM-Maps: Phoenix works in networks 2G/3G/4G. Make sure your Xiaomi supports carrier frequencies (e.g., the same as the one you use, B1/B3/B7/B20 for 4G).
• 🔄 Update the firmware: outdated versions MIUI You may have errors in the mobile communication module. → The phone. → Updating the system.
• 📶 Activate mobile data: In the notification panel, turn on the mobile data switch or check in Settings → SIM-maps and mobile networks.
• 🔒 Unlock. SIM-card: if requested PUK-Enter the code (usually listed on the plastic holder) SIM-map).

If you use Xiaomi with two SIM-cards (Dual) SIM), Make sure that the mobile data is assigned to the Phoenix card slot:

1. Open the Settings. → SIM-maps and mobile networks.
2. Choose. SIM-Phoenix map (usually displayed as SIM 1 SIM 2).
3. Activate the option Mobile data for this slot.

⚠️ Note: Some Xiaomi models (e.g. Redmi Note 10 Pro) POCO X3 Pro) when mobile data is first enabled, a request to set standard settings may appear APN. Don’t miss this step – it simplifies the configuration.

2.Automatic APN setup for Phoenix

The easiest way is to let Xiaomi automatically load APN settings, which works 80 percent of the time, but can fail if:

• 📡 SIM-Card not activated (requires a call to 0611 or registration on the Phoenix website).
• 🔄 Mobile data is disabled on the smartphone (even for automatic settings, a minimum connection is required).
• 🛠️ Firmware MIUI modified (castomy assemblies can block automatic configuration).

To start the automatic setting:

1. Go to Settings. → SIM-maps and mobile networks → [Choose. SIM-phoenix map] → Access points (APN).
2. Click on the three dots in the top right corner and select Reset to default values.
3. Confirm the action and restart the smartphone.
4. After activation, wait for SMS from Phoenix with activation confirmation (usually within 5-10 minutes).

If the automatic setting does not work, check:

• 📞 Status SIM-Cards: call *100# or *111# – if the call fails, the card is not activated.
• 🌐 Network Region: C Settings → SIM-maps and mobile networks → Select the network automatically.

💡

If the Internet doesn't work after you set it up automatically, try manually adding APN (instructions in the next section) and restarting your phone. Sometimes the MIUI system requires a double reboot to apply the changes.

3.Manual setting of APN for Phoenix on Xiaomi

If the automatic method doesn't work, you'll have to enter the settings manually, and here's the current APN configuration for Phoenix (tested in 2026):

Step-by-step instructions for adding APN:

1. Open the Settings. → SIM-maps and mobile networks → [Choose. SIM-phoenix map] → Access points (APN).
2. Click on the + (add new APN) icon or the New APN.
3. Fill in the fields as above. Do not leave the mandatory settings (APN, User Name, Password) blank.
4. Save the settings (Save or Ready button in the upper right corner).
5. Select the newly created APN profile in the list and activate it.

Make sure that APN It is called Internet.phoenix (without typos)|

Check that the authentication type is PAP|

Activate the created profile (check next to the name)|

Reboot your smartphone to apply changes-->

⚠️ Note: Some Xiaomi models (e.g. Redmi) 9A or POCO M3) post-conservation APN You may need to reset your network settings. → System system → Resetting settings → Resetting Wi-Fi, mobile network and Bluetooth settings will delete all saved Wi-Fi passwords!

4. MMS setup for Phoenix

If you need to not only transfer data, but also send MMS (for example, to share photos through the standard Messages application), you will need an additional APN.

After preservation:

• 📲 Reboot your smartphone.
• 📧 Send a test. MMS to himself (for example, a photograph of himself).
• 🔄 If MMS Not sent, check that the settings → Annexes → Communications → Settings MMS The correct profile is selected APN.

Important: On Xiaomi with MIUI 14 firmware and later, sending MMS can be blocked due to operator restrictions. In this case, use messengers (WhatsApp, Telegram) or the Phoenix Personal Account application to transfer files.

5. Solving typical problems with the Phoenix Internet

Even after setting up the APN correctly, Xiaomi users may encounter difficulties, and consider the most common errors and ways to fix them:

• 🚫 No Internet connection: Check your account balance (*100#). Make sure that in the settings → SIM-Maps and mobile networks enabled Mobile data and data transfer. Try switching to another type of network: Settings → SIM-maps and mobile networks → Preferred type of network → choose 4G/3G/2G (motor-car).
• 🐢 Slow Internet (Edge instead of Slow Internet) 4G): Manually select the network: Settings → SIM-maps and mobile networks → Choice of network → Manual search → Select Phoenix or MTS (if Phoenix works via MTS). Turn off Traffic Saving in Settings → Connections and sharing → Saving traffic.
• 📵 Badge 4G The Internet is not working: Delete all saved APN And create a new one according to the instructions in Section 3. Check if the Internet is blocking. VPN or firewall (e.g. AdGuard or NetGuard).

If the problem persists, perform a network diagnosis:

1. Enter the code ##4636## in the phone application.
2. Select Phone Information.
3. Check the connection status in the Set preferred network type section.

6. Optimizing Internet Speed on Xiaomi

Even with the right APN settings, mobile internet speeds can be lower than expected, and here are a few ways to improve it:

• 📶 Turn off automatic network selection: in Settings → SIM-maps and mobile networks → Select Manual Search and connect to Phoenix or MTS (depending on region).
• 🔧 Set your priorities 4G: In Settings → SIM-maps and mobile networks → Preferred network type select only 4G (if the coating is stable).
• 🚀 Turn off background activity: go to Settings → Battery and productivity → Managing Background Consumption and Limit Background Work for Unnecessary Apps.
• 🛡️ Check for viruses: some malware consumes traffic in the background. Use Google Play Protection or Dr.Web.

For advanced users:

• 🔍 Change. DNS: In Wi-Fi or mobile settings, select 1.1.1.1 (Cloudflare) or 8.8.8.8 (Google) instead of DNS operator.
• 📡 Use Signal Amplification Apps: Network Signal Guru or OpenSignal will help you find the best coverage.

💡

If the Internet speed remains low despite all settings, the problem may be on the operator's side. Check the coverage of the Phoenix in your region on the official website or through the Phoenix Personal Account application.

7. Alternative ways of connecting to the Internet

If you can not configure mobile Internet Phoenix, consider alternative options:

• 📶 Modem mode: connect Xiaomi to another device via Access Point (in Settings) → Connections and sharing → Modem mode).
• 🔗 Wi-Fi Linkage: If you have a stable Wi-Fi network nearby, use it instead of mobile internet.
• 🔄 Others SIM-maps: temporarily install SIM-card of another operator (for example, Tele2 or Iota) to check the operability of the communication module.

For users of Xiaomi with eSIM support (e.g. Xiaomi 13 Pro or POCO F5):

• 📱 Install a virtual one. SIM-Phoenix card through the Phoenix Personal Account application.
• 🔄 Settings APN eSIM is identical to the physical SIM-map.

⚠️ Note: Some Xiaomi models (e.g. Redmi Note 11) use two SIM-The speed of the Internet may drop, in which case, try to leave only one. SIM-map (Phoenix) or disable the second in the settings.

8. Frequent Questions and Answers (FAQ)