Xiaomi Mi Dual Mode Silent Edition: How to Connect to Bluetooth in 5 Minutes

Xiaomi Mi Dual Mode Silent Edition has become a popular choice because of its versatility: it works both over the 2.4 GHz radio frequency adapter and over Bluetooth. However, many users face difficulties with the first wireless connection. Unlike the standard USB-In a receiver where it is enough to insert the device into the port, Bluetooth-connection requires several steps – and here errors often occur.

In this article, we will discuss step-by-step instructions for different devices (Windows, macOS, Android, iOS), talk about typical problems (for example, when the mouse is not detected or connects, but does not work), and give tips on optimizing the connection.

If you've tried to plug in a mouse before, but it didn't work, don't rush it back to the store. 90 percent of the time, it's done by setting up the drivers or resetting the device. Let's start with the preparation.

Preparing the mouse for Bluetooth connection

Before pairing, make sure your Xiaomi Mi Dual Mode Silent Edition is Bluetooth ready.This model supports two connection modes, and switching them is done by a physical button on the case.

Here's what we need to do:

• 🔋 Charge the mouse (if the battery is under 20%, there may not be enough power to pair). USB-C oracle 1A.
• 🔄 Switch to Bluetooth mode. To do this, hold the on button (located under the wheel) for 3-5 seconds until the indicator starts flashing blue (for 2.4 GHz, it flashes green).
• 📱 Check compatibility. The mouse works with Bluetooth 4.0 and higher. Older PCs (before 2015) may need an external adapter.

If the light doesn't flash blue, try resetting your mouse: hold the 10 second switch until the LED goes out and blinks again, which will return the device to factory settings.

💡

If the mouse does not respond to the press of the button, connect it over the cable for 10 minutes - this will unlock the battery and reset the controller errors.

Connecting to Windows 10/11: Step-by-step instructions

On Windows 10 and 11, the pairing process is almost identical, but there are nuances with drivers.

1. Open Bluetooth settings: Press Win + I → go to Devices → Bluetooth and other devices. Activate the Bluetooth slider (if it is turned off).
2. Add a new device: Click Add Bluetooth or another device → select Bluetooth. In the list, find the Mi Dual Mode Silent Mouse (or MI Mouse) and click on it.
3. Confirm the pairing: If there is a request for input PIN-Leave the field empty, the mouse doesn't need it!.

Once connected, check the mouse in Device Manager (Mouse section and other pointing devices). If there is an exclamation mark next to the name, manually update the driver:

Download the driver from [the official website of Xiaomi](https://www.mi.com/global/support)|Open Device Manager. → Update the driver → Select a driver on my computer|Specify the path to the downloaded file|Restart the PC.-->

Matching with macOS: features and life hacks

On a MacBook or iMac, Xiaomi’s mouse connection usually goes smoothly, but there are nuances with macOS versions older than the Big Sur. If your Mac is released before 2018, upgrade to the latest version first.

Instructions for macOS:

1. Open System settings → Bluetooth.
2. Make sure that Bluetooth is enabled (the icon in the menu bar should be blue).
3. Click Connect next to Mi Dual Mode Silent Mouse.
4. If the mouse does not appear in the list, click Update or restart the Bluetooth module: sudo pkill bluetoothd

Important for macOS Monterey and newer: if the mouse connects, but the cursor twitches, turn off the function "Increased contrast pointer" in the settings of special features.

⚠️ Note: On a Mac with a chip M1/M2 There may be a problem with automotor shutdown of the mouse through 5 To fix this, turn off the power saving for Bluetooth devices in System settings → Saving energy.

Connecting to Android and iOS: Limitations and Solutions

Although the Xiaomi Mi Dual Mode Silent Edition is marketed as a universal mouse, its support on mobile devices has limitations. On Android, it works with almost all smartphones (starting with the version). 7.0), on iPhone/iPad — iOS only 13+, but with reduced functionality (for example, side buttons do not work).

For Android:

• 📱 Open the Settings. → Connected devices → Bluetooth.
• 🔍 Click Device Search and select MI Mouse.
• ✅ Confirm the conjugation (PIN-code not required).

For iOS:

• 🍎 Go to Settings. → Bluetooth.
• 🔄 Wait for Mi Dual Mode Silent to appear on the list and tap on it.
• ⚠️ On the iPhone, the mouse will only work in pointer mode (without gesture support).

⚠️ Note: On some smartphones Xiaomi/Redmi (for example, on firmware MIUI 12) You may need to turn off the “Double tap to wake up” function in the screen settings – otherwise the mouse will accidentally lock the phone.

Solving Typical Connection Problems

If the Xiaomi Mi Dual Mode Silent Edition mouse is not connected or is not running smoothly, check out the following points:

1.The mouse is not detectable.

• 🔄 Reboot the Bluetooth module on the device (turn off/on the adapter).
• 🔋 Check the charge – at a level below 15%, the mouse may not broadcast the signal.
• 📡 Make sure the distance to the adapter is less than 10 meters (ideally 1-2 meters).

2. Connects but doesn't work

• 🖱️ Check your device profile in Bluetooth settings – the mouse should be defined as a “pointing device” and not an “audio device".
• 🔄 Remove the mouse from the list of associated devices and connect again.
• 💻 Update drivers (relevant to Windows).

3.The cursor twitches or freezes

• 📶 Eliminate interference from other wireless devices (Wi-Fi routers, microwaves).
• 🔄 Switch the mouse to 2.4GHz mode – it is more stable for games or graphics work.
• 🛠️ Turn off energy savings for USB-Ports in Device Manager.

💡

If the mouse is plugged in but the buttons are not working, check the Key Filter settings in Windows special features, which can block repeated clicks.

Mode comparison: Bluetooth vs 2.4GHz

The Mi Dual Mode Silent Edition supports two types of connectivity, and each has pros and cons.

For office work or use with a tablet, it is better to choose Bluetooth - it is more economical and does not take up any of the tasks. USB-For games or graphic design, 2.4 GHz mode is preferred because of less latency.

You can switch between modes at any time, so the mouse remembers the last active connection, for example, if you were working over Bluetooth and then inserted it. USB-Receiver, the mouse will automatically switch to 2.4 GHz.

FAQ: Frequent questions about Xiaomi Mi Dual Mode Silent Edition