Connecting the Xiaomi mouse over Bluetooth: full instruction for PC, laptop and smartphone

Why does Xiaomi not connect the first time?

Xiaomi’s wireless mice (especially the Mi Bluetooth Mouse, Mi Portable Mouse, or Mi Silent Mouse) are popular for their compactness, ergonomics, and low power consumption. However, many users face the problem of not being detected via Bluetooth or connecting with errors, ranging from a trivial battery run out to driver conflict in Windows.

In this article, we will analyze all the ways to connect the Xiaomi mouse over Bluetooth to different devices: Windows PC 10/11, MacBook, Linux laptops, and smartphones and tablets Xiaomi/Redmi. We will focus on common errors (e.g. code). 43 And you can use the device manager to fix them, and if your mouse flashes blue, but it doesn't, you can find a solution here.

1.Preparing Xiaomi mouse to connect

Before you search for a mouse on the Bluetooth list, make sure it’s ready to pair. Most Xiaomi models (such as the Mi Bluetooth Mouse 2 or Mi Dual Mode Wireless Mouse) have dual modes: Bluetooth and via the Bluetooth. USB-receiver (2.4 GHz). To activate Bluetooth mode, follow the following steps:

• 🔋 Check the battery. Xiaomi mice are usually equipped with a battery of 300-500 mAh. If the indicator does not burn or flashes red, charge the device via USB-Type-C (depending on the model) for 1-2 hours.
• 🔄 Put the mouse in pairing mode. Press the on button (usually located at the bottom) for 3-5 seconds until the indicator starts flashing blue and red alternately - this is a signal of readiness to connect.
• 📱 Turn off other Bluetooth devices. If your PC or smartphone already has headphones, keyboards or gamepads connected, temporarily turn them off, reducing the risk of conflict.

⚠️ Note: If the Xiaomi mouse has previously been paired with another device, it should be reset. To do this, hold the on button for 10-15 seconds until the indicator goes out and flashes quickly.

Charge the mouse (indicator green/blue)|Transfer to pairing mode (blind/red flashing)|Disable other Bluetooth devices|Reset previous connections (if necessary)-->

Connecting to Windows 10 and 11: Step-by-step instructions

The algorithm for connecting Xiaomi’s mouse to Windows computers is the same for both versions of the OS, but there are nuances. For example, Windows 11 added quick access to Bluetooth settings through the taskbar, and Windows 10 may need to update drivers.

Follow the instructions:

1. Open Settings → Devices → Bluetooth and other devices (or press Win + I for quick access).
2. Activate the Bluetooth slider (if it is turned off).
3. Click Add Add the device → Bluetooth.
4. In the list, find the Xiaomi mouse (usually displayed as Mi Bluetooth Mouse or Xiaomi BT Mouse).
5. Select it and wait until the pairing is complete (may require input). PIN-Standard code: 0000 or 1234).

If the mouse is not listed in the list:

• 🔍 Check if the indicator flashes on the mice (if not, repeat the steps from Section 1).
• 🖥️ Update Bluetooth adapter drivers via Device Manager (Bluetooth section).
• 🔄 Restart your computer and try again.

3. Connection to MacBook and macOS

Xiaomi mice are compatible with macOS, but there may be nuances with drivers (for example, no support for additional buttons).

1. Open System settings → Bluetooth.
2. Make sure that Bluetooth is enabled (the icon in the menu bar should be blue).
3. Click Connect next to the name of Xiaomi mouse.
4. If you receive a confirmation request, click Connect.

⚠️ Note: Some MacBook models (especially with a chip) M1/M2) You may need to update your mouse firmware:

1. Connect the mouse through USB-cable (if supported).
2. Download the Xiaomi Bluetooth Firmware Updater utility from the official website.
3. Follow the program instructions.

Note: If the scroll wheel is not working properly, install third-party software such as USB Overdrive or SteerMouse (paid but supports button settings).

💡

On a MacBook with Touch Bar, you can add a Bluetooth button to the control panel for quick access: System settings → Keyboard → Set up Touch Bar.

4. Connection to Xiaomi/Redmi smartphones and tablets

Xiaomi mice can be connected not only to PCs, but also to mobile devices - this is convenient for working with DeX Mode or games (for example, in Genshin Impact). MIUI:

1. Open Settings → Connections and Sharing → Bluetooth.
2. Activate Bluetooth and click Device Search.
3. In the list, find the mouse (the name can be displayed as Mi Mouse or BT Device).
4. Press it and confirm the pairing.

When you connect, you'll see a cursor pointer on the screen, and you can control it.

• 🖱️ Left button taps across the screen.
• 🖱️ Right button – call the context menu (analogue of a long tapa).
• 🔄 Kolesico - scrolling pages.

⚠️ Attention: On some firmware MIUI (especially in the case of seduction, there may be no support HID-devices:

• Update the firmware to the latest version.
• Use the mouse in mode USB-receiver (if supported).

💡

On Xiaomi smartphones, the mouse only works in the horizontal orientation of the screen. For games (for example, PUBG Mobile), you may need to turn on Mouse mode in the emulator settings.

5. Linux connection (Ubuntu, Mint, Fedora)

In most Linux distributions, Xiaomi mice connect automatically via BlueZ (Bluetooth Stack), but sometimes manual configuration is required. Instructions for Ubuntu 22.04 LTS:

1. Open the terminal (Ctrl + Alt + T) and check the Bluetooth status: systemctl status bluetooth If the service is not active, run it: sudo systemctl start bluetooth
2. Install a graphics manager (if not installed): sudo apt install blueman
3. Open Blueman (blueman-manager) and click Search.
4. Select the Xiaomi mouse and plug it in.

If the mouse is connected but not working:

• 🐧 Check the access rights: ls -l /dev/input/ (EventX or mouseX devices should be displayed).
• 🔧 Install xserver-xorg-input-libinput: sudo apt install xserver-xorg-input-libinput

⚠️ Note: On some Linux kernels (e.g, 5.4.x) Bluetooth 5.0 may not be supported. Update the kernel to version 5.15+ or use USB-receiver.

Typical errors and their solutions

Even after a successful connection, the Xiaomi mouse may not work properly. Let’s consider the most common problems and ways to fix them:

🔴 The mouse connects, but the cursor doesn't move.

• 🖱️ Check the surface (use a mouse mat).
• 🔋 Replace the battery or charge the battery.
• 🔄 Reconnect the mouse in another USB-port (if the receiver is used).

🔴 The mouse periodically shuts down.

• 📶 Reduce the distance between the mouse and the adapter.
• 🔌 Turn off power saving modes for Bluetooth in power settings.
• 🔄 Update your mouse firmware (if available).

🔴 The mouse buttons are not working correctly (for example, left and right switched places)

• 🖱️ For Windows: Open the Control Panel → Equipment and sound → Mouse and change the purpose of the buttons.
• 🍎 For macOS: Use utilities USB Overdrive or Karabiner-Elements.

If none of these methods worked, try resetting your mouse settings:

1. Disconnect the mouse from all devices.
2. Hold the switch on for 15 seconds (until the indicator flashes twice).
3. Reconnect it.

7. FAQ: Answers to Frequent Questions