Xiaomi’s Internet connection gives you access to streaming services, online cinemas, games and system updates. However, not all users know how to properly configure the network on Mi. TV 4/5, Redmi Smart TV or Google models TV. In this article, we will analyze all current ways of connecting - from standard Wi-Fi to non-obvious solutions like USB-modem, and also consider typical errors and their elimination.
Xiaomi TVs have the flexibility to set up the network, but the interface may vary depending on the version of the MIUI TV or Google TV firmware. For example, on older models (Mi TV 3S), the network menu is hidden in the "All settings" section, and on new ones (Xiaomi TV A Pro) it is brought to the home screen. We will take these nuances into account and give universal instructions.
1. Wi-Fi connection: step-by-step instructions
Wireless is the most popular way to connect to the Internet from a Xiaomi TV. This requires a router that supports 802.11ac (recommended) or 802.11n. Speed depends on the distance to the router and the presence of obstacles: walls of concrete can reduce the signal by 50-70%.
How to connect:
- 📺 Turn on the TV and go to Settings → Network and Internet → Wi-Fi.
- 🔍 Select your network from the list. If it's not available, click "Update" or check if the broadcast mode is on. SSID router.
- 🔑 Enter your password (registration is important!). On Xiaomi remotes, use the button to switch the keyboard. ↑/↓.
- ✅ Confirm the connection. Connected status will appear in 10 to 30 seconds.
Important: If the TV is not connected, try:
- 🔄 Restart router (turn off power for 30 seconds).
- 📶 Move the router closer to the TV or use a repeater.
- 🔒 Make sure there are no Cyrillic characters in the password – some Xiaomi models don’t support them.
2. Connection via Ethernet (cable)
The wired connection provides maximum stability and speed – ideal for the 4K-streaming or online gaming. Xiaomi TVs have a connector. RJ-45 It is usually located on the back, unless it is (as on some Redmi Smart models). TV), You will need a USB-Ethernet adapter (compatible models: AX88179, RTL8153).
Instructions:
- Connect the cable from the router or modem to the LAN port on the TV.
- Go to Settings → Network and Internet → Ethernet.
- Select "Connect». IP-address DNS Usually appointed automatically (DHCP).
- Check the connection: open YouTube or run a speed test in Settings → Network → Network Test.
On models with Google TV (e.g. Xiaomi TV P1), the path to Ethernet settings may be different: Settings → Network → Additional settings → Wired network.
LAN port on TV clean (no dust/damage) |
Category cable Cat5e or higher (for speed of 100)+ Mbit/s)|
Router supports gigabit Ethernet (if you need speed) >100 Mbps)|
The router has DHCP (Automatic IP Distribution) enabled
-->
3. Mobile hotspot: Internet from the phone
If you don't have Wi-Fi or cable, you can use your smartphone as an access point. This is suitable for temporary connection, but note: traffic consumption will be high (up to 3-7 GB / h when watching Full HD). Xiaomi TVs with MIUI TV can have problems connecting to hotspots at 5 GHz - it is better to use 2.4 GHz.
How to set up:
- On your smartphone (Android or iPhone), turn on modem modem: Settings → Access Point and modem → Portable Access Point.
- Set a network name (SSID) and password (minimum 8 characters).
- On a Xiaomi TV, select the network you created from the Wi-Fi menu and enter your password.
⚠️ Note: Some operators block the distribution of the Internet USB or Wi-Fi (for example, MegaFon on tariffs without the option "Modem.
| Problem. | Reason. | Decision |
|---|---|---|
| TV doesn't see hotspot | Frequency incompatibility (5 GHz) | Switch hotspot to 2.4GHz in phone settings |
| There is a connection, but there is no internet. | Limitation of operator | Call for support or change the rate |
| Weak signal. | The phone is far from the TV. | Place your phone closer (within 3-5 meters) |
4. USB-modem: Internet 3G/4G
A rare but working way is to connect 3G/4G-modem USB-Xiaomi TVs don’t officially support this feature, but some models (Mi) TV 4S, Redmi Smart TV X50) can recognize modems on Huawei HiLink chips (e.g., Huawei) E3372) or ZTE. Speed is limited by modem capabilities and operator network coverage.
Instructions:
- 📶 Put it in. SIM-map to the modem and connect it to USB-TV port (preferably) USB 3.0).
- 🔌 Go to Settings. → Devices and accessories → USB-device.
- 🔄 If the modem is defined as a drive, restart the TV - sometimes this helps activate the network.
List of compatible modems
Limitations:
- 🚫 No support. 5G-Modems (even if the TV has a port) USB-C).
- 🔋 The modem will be constantly discharged - use a powered hub.
- 📡 Speed can drop when other devices are connected to the modem at the same time.
5. Solving Connection Problems
If your Xiaomi TV isn’t connected to the internet, check the obvious first.
- 🔌 The router is turned on and distributes the Internet (indicator) WAN green-burn).
- 📡 On the TV enabled mode "Flight" (Settings) → Plane mode must be offline.).
- 🔄 Reboot the TV: Press the power button on the remote for 5 seconds → select "Reset».
Common mistakes and ways to eliminate them:
| Mistake. | Possible cause | Decision |
|---|---|---|
| IP-address not received | DHCP failure on router | Set up static IP manually (see below) |
| Authentication failed | Wrong Wi-Fi password | Check the symbol register and special signs |
| The network is maintained, but without access to the Internet | Lockdown MAC-router | Add the TV MAC to the whitelist (find in Settings → About TV → Status) |
| DNS error | The provider's problem | Change the DNS to 8.8.8.8 (Google) or 1.1.1.1 (Cloudflare) |
For manual IP setting:
- Go to Settings → Network and Internet → Wi-Fi → [Your Network] → Additional settings.
- Select "Static IP" and type: IP: 192.168.1.100 Mask: 255.255.255.0 Gateway: 192.168.1.1 (your router's address) DNS: 8.8.8.8
- Save the settings and restart the TV.
💡
If you lose Internet after you update your firmware, reset your network settings: Settings → System → Reset → Network Reset. This will delete all stored Wi-Fi networks, but resolve most software failures.
6. Optimizing Internet Speed on Xiaomi TV
Even if the TV is connected to the network, the speed may not be enough for comfortable viewing.
- 📺 SD-quality (480p): 3 Mbps.
- 🎬 Full HD (1080p): 8-12 Mbit/s.
- 🎮 4K HDR + Online games: from 25 Mbps.
How to speed up the Internet:
- 📶 Switch the router to a 40 MHz channel (in the Wi-Fi router settings).
- 🔌 Use the cable. Cat6 instead Cat5 ethernet.
- 🚫 Turn off application background updates: Settings → Annexes → Auto-update.
- 🔄 Enable the Gaming mode on the router (if any) to prioritize TV traffic.
To check the speed:
- Open the settings → Network → Network Test.
- Compare the rates to your provider's. If the speed is 30%+ lower, call for support.
💡
For stable 4K-streaming TV Recommended wired connection (Ethernet) or Wi-Fi 5 GHz with support MU-MIMO.
7.Alternative methods: Miracast and DLNA
If you can't connect the TV directly to the Internet, you can use a smartphone or computer screen transfer.
- 📱 Miracast (wireless duplication of screen with a Android/Windows).
- 🖥️ DLNA (streaming of media files from PC).
- 🍎 AirPlay (for Apple devices, you need a TV with Google) TV).
How to set up Miracast:
- On TV: Settings → Connection and Sharing → Wireless display.
- On a smartphone (Android): Settings → Connected devices → Screen transfer.
- Select the TV from the list of available devices.
⚠️ Note: When transferring the screen through Miracast, there may be a delay (lag) of up to 100-300 ms. This is critical for games, but not noticeable when watching video.
For DLNA:
- Install a server program on your PC (e.g., Serviio or Plex).
- On the TV, open the Media Player or Gallery app.
- Select your PC from the list DLNA-device.