How to turn on Wi-Fi on a Xiaomi TV without a remote: all the ways of 2026

Lost or broken remote from the Xiaomi Mi TV, and the Internet is needed right now? The situation is familiar to many: without a connection to Wi-Fi, you can not update the firmware, install applications or even configure Smart TV. Fortunately, the manufacturer has provided several alternative ways of managing — from hidden buttons on the body to mobile applications.

In this article, we will discuss 5 proven methods to turn on Wi-Fi on Xiaomi TV without the original remote, including little-known tricks for Mi TV 4A/4S/5/5X/Q1/Q2 models and the new Xiaomi TV A Pro or Xiaomi TV S Pro series. All instructions are relevant for MIUI TV firmware 3.0 and later (2020-2026). If your TV is released before 2018, some methods may not work - see FAQ at the end of the article.

Important: Make sure the TV is on and the power indicator is on white or blue (depending on the model) before starting. If the screen does not respond to buttons, first check the signal source (possibly the wrong one is chosen). HDMI-entrance).

1. Control through buttons on the TV body

All Xiaomi TVs (except the thinnest OLED models) have physical buttons on the bottom or sidebar, and combinations of these allow you to open menus and connect to Wi-Fi without a remote.

• 📺 Mi TV 4A/4S (2018–2020): buttons are hidden under the lower edge on the right (covered by a stub).
• 🖥️ Mi TV 5/5X/Q1 (2020–2022): touch buttons on the right sidebar (sometimes under the logo).
• 🔄 Xiaomi TV A Pro/S Pro (2023–2026): just one button Power/Menu infrared.

For models with mechanical buttons (the 4A/4S series), follow the following steps:

1. Press and hold the Menu (or Home) button for 5-7 seconds until the main menu appears.
2. With Volume +/- (volume) buttons, move to the menu items, with the Menu button confirm the choice.
3. Go to Settings → Network → Wi-Fi and select your network.
4. To enter the password, use the Volume (move) and Menu (select character) buttons.

Make sure the TV is plugged in.

Find the buttons on the case (see diagram for your model)

Prepare a password for Wi-Fi (write it down on paper)

Check that the router is working (Wi-Fi indicator is on)-->

⚠️ Attention: On Xiaomi models TV Q2 75" and Xiaomi TV S Pro 65" touch buttons may not work when wet fingers.Wash the panel with a dry cloth before using.

2.Use of USB-mouse-keyboard

If there's one on the TV USB-port (usually side or back), you can connect a wired or wireless mouse/keyboard. This method works on all Xiaomi models TV Android TV 9.0 and newer. Even the cheapest one will do. USB-200-ruble mouse.

Instructions:

1. Connect the mouse to USB-In 5-10 seconds, the cursor should appear on the screen.
2. Hover over the Settings icon (cog in the upper right corner).
3. Go to the Network → Wi-Fi, select your network and enter your password using a virtual keyboard.

For the keyboard:

• 🖱️ Shooters (↑↓←→) — menu-navigation.
• 🔘 Enter - Selection of a Point.
• 🔤 Esc – a step back.

💡

If the mouse is not identified, try using it. USB-Some Xiaomi TVs do not recognize high-power devices (for example, backlit gaming mice).

⚠️ Attention: On Mi models TV Stick (prefix) USB-The port is only for power. You need to connect the mouse through the power supply. OTG-cable (an additional adapter will be required).

3. Remote management through the Mi Remote app

Xiaomi’s official Mi Remote app allows you to control your TV from your smartphone, replacing your physical remote. The app supports all Mi TV and Xiaomi TV models released after 2017. The main condition is that the TV and phone must be connected to the same local network (for example, via a mobile hotspot).

Step-by-step:

1. Download Mi Remote for Android or iOS.
2. Launch the app and select the device: TV → Xiaomi TV.
3. Click Add Device and follow the instructions on the screen.The TV should appear in the list of available.
4. After connecting, open the virtual remote and go to Settings → Network → Wi-Fi.

If the TV is not on the network:

• 📱 Create an access point on your phone (network name: Xiaomi_Hotspot, password: 12345678).
• 🔄 Connect the TV to this network via buttons on the case (see Section 1).
• 🔗 Mi Remote app will now be able to connect to the TV.

Buttons on the case

USB-mouse/keyboard

Mi Remote appendix

Another way.-->

4. Resetting to factory settings (if other methods do not work)

If none of these methods work, then you have a hard reset, which will delete all settings, including saved Wi-Fi networks, accounts and installed apps, and only use it as a last resort!

Instructions for discharge:

1. Turn off the TV with the Power button on the case.
2. Press and hold the Menu + Volume buttons at the same time (for 10-15 seconds).
3. When the Xiaomi logo appears on the screen, release the buttons.
4. In the recovery menu, select Wipe data/factory reset (use volume buttons for navigation, Menu for confirmation).
5. After the reset, the TV will restart. At the initial setup stage, select your Wi-Fi network.

⚠️ Attention: On Xiaomi TVs TV S Pro 2026 reset via buttons can block access to the Bootloader. If after the procedure the screen flashes red, contact the service center.

5. Alternative methods: HDMI-CEC and voice control

If you have another remote (such as the Xiaomi Mi Box or the soundbar), you can try to control the TV via HDMI-CEC, a standard that allows HDMI-connected devices to exchange commands.

How it works:

• 🎮 Connect to the TV device with support CEC (For example, Xbox, PlayStation or Apple TV).
• 🔄 Turn on the option. HDMI-CEC in the settings of the TV (if you have access through buttons or mouse).
• 📢 Use the remote from the connected device to navigate the Xiaomi menu TV.

For voice-controlled models (Xiaomi TV S Pro and Xiaomi TV Q2):

1. Activate the voice assistant with a button on the body (microphone).
2. Say the command: "Open Wi-Fi settings" or "Connect to the network [name]".
3. Use voice input to enter the password (dictate the characters one by one).

💡

HDMI-CEC does not work on all Xiaomi TV models. Before buying additional devices, check the protocol support in the specifications of your TV (Interfaces section).

Frequent mistakes and their solutions

Even with the instructions, users often face problems. TOP-5 errors and ways of correcting them:

If none of these methods worked, check the integrity of the TV's Wi-Fi module. On 2018 Mi TV 4A models, the Wi-Fi antenna often fails (symptom: the networks are visible, but the connection is impossible), in which case only repairs at the service center will help.

FAQ: Answers to popular questions