How to turn on the access point on the Xiaomi phone: full instructions with pictures and life hacks

The hotspot on Xiaomi’s smartphone turns your phone into a mini-router that distributes internet to laptops, tablets or other gadgets, a feature that saves you when you’re traveling, in the country, or when your home Wi-Fi suddenly goes offline. But not all users know how to set it up correctly – especially given the features of the shell. MIUI limitations of mobile operators.

In this article, you will find not only the basic instructions for turning on the access point, but also hidden settings that will help save traffic, increase the speed of distribution and avoid connection problems. 14, Redmi Note 13, POCO F6 And why, and why, the access point is automatically shut down. 5-10 minutes and how to fix it.

1. Preparation of the phone before the access point is turned on

Before you activate your Internet distribution, make sure your Xiaomi is ready for the task.

• 📶 Check the signal level. 1-2 If you divide the network, the speed of the distribution will be extremely low, you'd better move closer to the window or to the balcony.
• 🔋 The battery should be at least 30%, and the distribution of the Internet is actively consuming energy - at 15% or lower, the phone can turn off the access point.
• 📱 Update. MIUI. In older versions of firmware (below) MIUI 14) there are bugs with automatic disengagement.
• 🛡️ Turn it off. VPN. Some of them VPN-Services block data transmission through the access point.

Pay particular attention to mobile fares. Many operators (e.g. MTS, Beeline) restrict or completely block the distribution of Internet at cheap rates. USSD-request:

*111*59# for MTS


*105*500# - for Beeline




*110*09# - for MegaFon




*558# for Tele2

⚠️ Note: If the operator's response says "No data transfer to other devices", you will have to change the tariff or buy an option. For example, MTS has "Mobile Internet for devices" (from 50)₽/day-night).

2. Step-by-step instruction: how to enable an access point on Xiaomi

The activation process is the same for most Xiaomi models, but may vary slightly depending on the version. MIUI. We will show you a universal way that works on Redmi, POCO and flagships of the Xiaomi series 13/14.

1. Open the settings (cog icon on the desktop).
2. Go to the section Network and Internet → Access Point and modem.
3. Slip on the Wi-Fi Access Point.
4. Activate the Wi-Fi Access Point slider (it will turn blue).

And then your Xiaomi will start sharing the Internet, but to connect, other devices will need a network name (SSID) You can change them on the same menu:

• 🔤 Access Point Name – This is the default phone model (e.g, Redmi_Note_12_5G). It is better to change it to something simple, for example. Xiaomi_Hotspot.
• 🔐 Password: minimum 8 characters, use a combination of letters and numbers (e.g, MiHotspot2026).
• 📡 Frequency Range – Choose 5GHz if your devices support it (more speed but less range).

Name of the network (SSID) displayed in the Wi-Fi list on another device

Password entered without errors (registration is important!)

Mobile Internet is enabled on the phone (icon) 4G/5G status-line)

Power saving modes are turned off (see section 4)

-->

If the access point does not appear in the list of networks on a laptop or tablet after turning on, try:

1. Turn off and re-enable the access point on Xiaomi.
2. Reboot the device that is trying to connect.
3. Make sure there is no active phone on the phone VPN (It can block the transmission of data).

3. Hidden Access Point Settings: How to Increase Speed and Stability

By default. MIUI It limits the bandwidth of the access point to save battery life, but if you need top speed (for example, for online games or video calls), these settings will help:

Pay special attention APN-Incorrect settings are one of the main reasons why the access point doesn't work. Here are the current settings for popular carriers (2026):

If the speed is still low after changing the settings, try:

• 📱 Switch to another. SIM-card (if you have Dual-SIM) Some operators limit the speed on the second slot.
• 🔄 Change the network type with 4G on 3G (sometimes 3G It works more consistently in densely populated areas).
• 🛡️ Disable the firewall in security settings (Settings) → Memory and applications → firewall).

💡

If you give the Internet to a laptop, turn off downloading Windows updates via metered connection. To do this, go to "Settings" → Network and Internet → Wi-Fi → Manage known networks, select your access point and activate the option "Set as a limit connection".

4.Why the access point on Xiaomi is turned off by itself: 5 reasons and solutions

One of the most common problems is the automatic disabling of the access point through the 5-10 It's not a bug, it's a feature" MIUI, It's designed to save charge, but you can turn it off.

⚠️ Note: On Xiaomi models with Snapdragon 8 Gen 2 processor (such as Xiaomi 13 Ultra), the access point may be turned off due to overheating. → The phone. → If the value is above 45°C, let the phone cool down.

Here is a complete list of reasons and solutions:

If none of these methods worked, try resetting your network settings:

1. Go to Settings → Network and Internet → Additional → Network Reset.
2. Confirm the reset (you will need to enter) PIN-code SIM-map).
3. Reboot the phone and turn on the access point again.

💡

On models POCO F5 redmi K60 There's a hidden "Always on modem" setting in the engineering menu. To activate it, type ##4636### in the Phone app, go to Phone Information and turn on the "Wi-Fi hotspot always on" option".

5. How to distribute the Internet through USB Bluetooth (alternatives to Wi-Fi)

If the Wi-Fi hotspot is unstable, Xiaomi has two alternative ways to distribute the Internet: USB-They're less convenient, but sometimes they save you in critical situations.

Method 1: Distribution through USB (USB-modem)

Suitable for connecting to a laptop or PC. Advantages:

• 🔋 Does not run out of battery phone (power comes from the USB).
• 📈 More stable Wi-Fi in the face of interference.
• 🛡️ Fewer vulnerabilities for hacker attacks.

Instructions:

1. Connect Xiaomi to your computer via USB-cable (preferably original).
2. In the phone settings, select Network and Internet → Access Point and modem → USB-modem.
3. A new connection should appear on the computer in the "Network Connections".

Method 2: Distribution via Bluetooth

Cons: low speed (up to 3 Mbps) and fast battery drain.

Instructions:

1. Turn on Bluetooth on both devices.
2. Then, add them to the same sign.
3. On Xiaomi, go to Settings → Access Point and Modem → Bluetooth modem.
4. On the second device in Bluetooth settings, select your Xiaomi as the source of the internet.

⚠️ Note: When you give out via Bluetooth, you may see a notification on your phone saying "High battery consumption." This is normal - just plug in the charger if you plan to use it for a long time.

6. Traffic savings when using the access point

A phone-based Internet service can quickly run out of traffic, especially if multiple devices are connected to your point. Here's how to avoid unexpected costs:

• 📊 Limit speed for connected devices. → Wi-Fi hotspot → Connected devices can be set a limit (e.g. 512 Kbps for guest gadgets).
• ⏳ Set a timer. In the same menu, there is an option called Automatic Shutdown, where you can set the time of the access point (for example, 1 hour).
• 🚫 Block ads. Install an AdGuard or Blokada app on your phone, which will reduce traffic consumption. 15-20%.
• 🔄 Turn off auto-updates on connected devices (especially Windows and macOS).

For advanced users, there is a way to completely block access to certain sites through the access point.

1. Install the NetGuard app (free on Google Play).
2. Enable traffic filtering for the access point.
3. Add domains (e.g. vk.com, tiktok.com) to the blacklist to restrict access to social media.

💡

If you're sharing the Internet with a laptop, use a browser with compressed traffic (for example, Opera with Turbo mode enabled). 30-40% quality-free.

7.Security: How to Protect Your Access Point from Hacking

Open access points are easy targets for hackers, who can not only get hooked on your Internet, but also intercept personal data.

• 🔐 Use a complex password. Don't put simple combinations like 12345678 Or qwerty. The best option: 12+ symbols with letters, numbers and signs (for example, Mi)@Hotspot_2026!).
• 🔄 Change your password once a month if you are giving out the internet frequently in public places.
• 👥 Limit the number of connected devices. In the access point settings (max. connections), set a limit (for example, 3 devices).
• 🛡️ Hide. SSID. In the access point settings, activate Hide the network option – then your network will not appear in the public list.

To check who is connected to your access point:

1. Open the Settings. → Wi-Fi hotspot → Connected devices.
2. All the gadgets will be displayed with them. MAC-address.
3. If you see an unfamiliar device, immediately change the password and restart the access point.

For additional protection, install the Fing app on your Xiaomi phone (available on Google Play), which scans the network and shows:

• 📱 All connected devices (even hidden ones).
• ⚠️ Security vulnerabilities.
• 📈 Traffic consumption for each gadget.

8. Frequent Errors and Their Solutions (FAQ)

We have collected answers to the most popular questions of Xiaomi users on the topic of the hotspot. If your problem is not here, describe it in the comments, and we will help!