Wi-Fi with Xiaomi: How to turn on the access point in 3 minutes

Xiaomi smartphones have long become universal devices that can replace not only the player or camera, but also the router. The Wi-Fi Internet distribution function (modem/access point mode) allows you to connect a laptop, tablet or even another phone to the network when there is no fixed router at hand. However, many users have difficulty turning on this option for the first time, especially when it comes to newer versions. MIUI 14 or budget Redmi models.

In this article, you will find the most current ways to activate the access point on any Xiaomi device (including: POCO And Black Shark, you'll learn how to set up your network name and password, and you'll also learn how to deal with common errors, from not having an option on the menu to having problems connecting customers.+, Xiaomi 13 Ultra and POCO X5 Pro, so we guarantee performance even on fresh firmware.

1. Preparation of the smartphone for the distribution of Wi-Fi

Before you turn on the hotspot, make sure your Xiaomi is ready for the task.Here are key points that are often overlooked:

• 📶 Mobile Internet: on the smartphone should be active data transfer (3G/4G/5G). Check the network indicator in the status bar.
• 🔋 Battery charge: Wi-Fi distribution consumes energy faster than usual, recommended level - at least 30%.
• 🔄 System Updates: In Older Versions MIUI (Below 12) some settings may not be available. Update the software to Settings → The phone. → Updating the system.
• 🛡️ Safety: If you use it VPN or firewall (such as Avast), temporarily disable them – they can block traffic transmission.

Pay special attention to your carrier’s plan: Some mobile plans restrict or completely block the distribution of the Internet (for example, Tele2 or Yota in basic packages).

1. Open your browser on your smartphone and try to load any page.
2. Turn on the access point and try to connect from another device.
3. If the Internet works only on Xiaomi itself, but not on connected gadgets, the problem is the tariff.

💡

If you have a distribution limit, try changing it. APN (access point) in mobile network settings. Sometimes this bypasses operator locks.

2. Ways to Include an Access Point on Xiaomi

Depending on the version MIUI And the way to set up the smartphone models may be different, and we've put together all the options, including hidden menus for older devices.

Method 1: Standard (MIUI 12/13/14)

This is the easiest method for most modern Xiaomi:

1. Open the settings (cog icon).
2. Go to the section Network and Internet → Access Point and modem.
3. Slip on the Wi-Fi hotspot.
4. Activate the slider at the top of the screen.

After activation, the system automatically assigns the network name (usually). Xiaomi_XXXX) You can change them by clicking Setting up the access point.

Method 2: Through the notification panel

Quick access to the function is available from the curtain:

1. Swipe your finger down to open the notification panel.
2. Find the Access Point icon (may be hidden – swipe left to reveal all tiles).
3. Hold the icon for 1-2 seconds to go into settings.

If the icon is not present, it can be added:

1. Click on the pencil (Edit) in the notification panel.
2. Find the Access Point in the list and drag it to the active area.

Method 3: For older versions MIUI (11)

On devices like Redmi. 4X or Mi A1 path may differ:

Settings → Additional → Modem → Wi-Fi Access Point

If there is no additional section, try:

Settings → Wireless Networks → More → Modem Modem

3. Network Name (SSID) and Password Setup

By default, Xiaomi generates a complex password of 8-10 characters, but it can be changed to a more memorable one.

1. In the Wi-Fi Access Point menu, click Access Point Settings.
2. In the field Name of the net (SSID) Enter the desired name (for example, MyXiaomiHotspot).
3. In the Password field, specify a combination not shorter than 8 characters (we recommend using numbers, letters and characters).
4. Select Security Type: It is best to leave WPA2-PSK (most reliable).
5. Press Save.

Important: if you use special characters in your password (for example, @#$%), Make sure that the connected devices support them. Some printers or smartwatches may not recognize these combinations.

4. Solving Wi-Fi Distribution Problems

Even after you set it up properly, the access point may not work.-5 causes and ways of eliminating them:

Problem 1: Access point is turned on, but the Internet is not distributed

This is most often due to settings. APN (Operator's access points:

1. Go to Settings. → SIM-maps and mobile networks → [Yours. SIM] → Access points (APN).
2. Make sure you select the right profile (usually internet or default).
3. If there are several profiles, try each one in turn, restarting the smartphone.

Problem 2: Devices are not connected to the network

The reasons may be different:

• 🔐 Incorrect password: Check the symbol register (password and password are different!).
• 📡 Channel conflict: Change the Wi-Fi Channel in the access point settings (e.g., from 6 to 11).
• 🛡️ Lockdown MAC-Addresses: if the filter option is enabled MAC, Add Add Add Add Add Add Add Add Addresses to the Whitelist.

Problem 3: The access point itself is shut down

It's standard behavior. MIUI To save charge, to turn off the shutdown:

1. Go to Settings → Battery and Performance → Energy Saving Mode.
2. Select No Limits or add Access Point to Exceptions.
3. In the access point settings, activate Always on (if there is such a switch).

Make sure that mobile internet works on Xiaomi itself|

Try another Wi-Fi channel (e.g. 1, 6, or 11)|

Disable VPNs and firewalls |

Reboot the smartphone and the connected device|

Check the tariff limits of the operator-->

⚠️ Warning: If the access point fails after all the manipulations, check if it is blocked by an antivirus (e.g. 360 Security or Clean Master) that sometimes deletes the system files responsible for distributing Wi-Fi.

5. Optimization of speed and stability

By default, Xiaomi limits the speed of the handout to save traffic and battery power.If you want maximum performance, follow these steps:

Frequency band setting

Modern Xiaomi smartphones support distribution on two frequencies:

• 2.4 GHz: It passes through walls better, but is subject to interference from other networks.
• 5 GHz: Higher speed, but shorter range and compatibility.

To select the frequency:

1. In the access point settings, find the frequency band.
2. Choose 5 GHz for speed or 2.4 GHz for stability.
3. If you don’t have an option, your smartphone only supports 2.4GHz.

Restriction of connected devices

Every new device that connects to the access point slows down the speed for the rest.

• 📱 1–2 devices: maximum speed (up to 80% of mobile internet).
• 💻 3-5 devices: average speed (possible lags when downloading files).
• 🎮 6+ Devices: only for simple surfing (video) 4K will slow down).

On smartphones with a Snapdragon 8 Gen 2 processor (for example, Xiaomi 13 Pro), the speed of the handout can reach 800 Mbps when connected to the device. 5G, Only if the operator does not limit the capacity of the.

Use of an external antenna (for advanced)

If you need enhanced coverage (for example, to distribute the Internet in the country), you can connect an external antenna through the OTG-adapter:

1. Buy a Wi-Fi adapter with Host Mode support (e.g. TP-Link) TL-WN725N).
2. Connect it to your smartphone through OTG-cable.
3. Install the WiFi Host Spot app from Google Play.
4. Set up an access point through this application.

💡

For maximum speed, turn off background synchronization of apps (like Google Photos or Telegram) as they consume some bandwidth.

6. Alternative ways of distributing the Internet

If Wi-Fi doesn’t work for some reason, you can use other methods:

USB-modem

Suitable for connecting laptops or PCs:

1. Connect your smartphone and computer USB-cable.
2. On Xiaomi go to Settings → The Internet and the Internet → Access Point and modem.
3. Activate. USB-modem.
4. On the computer, wait for the driver to install (reboot may be required).

Advantage: more stable connection and charging of the smartphone during use.

Bluetooth modem

Less energy-consuming, but also less fast method (up to 3 Mbps):

1. Turn on Bluetooth on both devices.
2. Make sure you have them (on Xiaomi: Settings) → Devices → Bluetooth).
3. In the Access Point and modem menu, activate the Bluetooth modem.

Suitable for transferring small files or messengers.

Distribution annexes

If standard means MIUI Not working, try third-party utilities:

• 🔹 PdaNet+: Bypassing the locking operators, supports USB/Bluetooth.
• 🔹 ClockworkMod Tether: No root, but may not work on newer versions of Android.
• 🔹 FoxFi: Simple interface, but limited functionality in the free version.

⚠️ Note: Internet distribution applications often require the standard access point to be disabled MIUI. This can cause mobile network disruptions, especially on devices running MediaTek Helio (e.g. Redmi). 9A).

7. Battery savings in the distribution

Wi-Fi increases battery consumption by 20 to 40 percent depending on the number of devices connected, to extend battery life:

• 🔋 Connect charging: if you give the Internet for a long time, use an adapter on the Internet 18W+ (fast charging compensates for the expense).
• 🌑 Activate the dark theme: AMOLED-screens (e.g. Xiaomi) 12T) This reduces consumption by 5-10%.
• 📴 Turn off background processes: in Settings → Annexes → Auto-Run Ban Auto-Run Unnecessary Programs.
• 📶 Limit speed: In the access point settings, select Speed Limit (if any).

In some models (for example, POCO F4 GT) There's a Game Turbo mode that optimizes performance when you distribute the Internet. → Special facilities → Performance mode.

FAQ: Frequent questions about the distribution of Wi-Fi on Xiaomi