How to turn on the Internet on the phone Xiaomi Redmi 9

The modern smartphone has long ceased to be just a means of communication, becoming a full-fledged control center of the digital world. For owners of Xiaomi Redmi 9, the ability to use the device as a router when fixed Internet is not available, this feature, known as an access point or hotspot, allows you to instantly provide a network laptop, tablet or other gadget.

The MIUI operating system that runs Redmi 9 has powerful and flexible network connectivity management tools that can not only enable data transmission, but also fine-tune security settings, signal frequency and even limit the number of devices connected, and understanding these settings is critical to efficient mobile traffic use.

In this guide, we will take a look at all the steps in activating your Internet distribution, from basic settings to advanced optimization methods. You will learn how to hide your network from prying eyes, change your standard password to more complex ones and control traffic flow in real time.

Basic activation of the access point through settings

The easiest and most reliable way to start a distribution of the Internet is to use the system settings menu, which requires unlocking the Redmi 9 screen and finding the Settings icon, which is usually a gear, and inside the interface, you should find the partition responsible for wireless connections, since this is where all the network management tools are concentrated.

Once you log into the Wi-Fi Access Point menu, you will see a control panel where you can activate the function with one touch of the slider. However, before you turn on data, it is recommended to check the network name and password set to avoid problems with connecting other gadgets. Standard settings often contain common names that can confuse the user in crowded places.

Pay attention to activity indicators: when the function is working, a characteristic icon appears in the status bar that signals the operation of the router mode. If you plan to use this option often, it makes sense to put the switch on the desktop for quick access, which will save time and eliminate the need to go through the deep menu every time.

• 📱 Open “Settings” and go to the “Wi-Fi Access Point” section».
• 🔌 Click on the Wi-Fi Access Point switch to activate the mode.
• 📝 If necessary, click on the network name to change it to a unique one.
• 🔒 Set a strong password using letters and numbers to protect the channel.

Android will alert you that traffic may not be unlimited and request confirmation of action.Ignoring this warning can lead to unexpected charges if your plan has restrictions.

Set up security and network parameters

The security of the network you create is the number one priority, especially if you are in a public place. In the settings of the Xiaomi Redmi 9 access point, you can choose the encryption protocol that will be used to protect the data you transmit. By default, the system offers the most compatible and secure option, but you can change it if necessary.

The device supports both 2.4 GHz and 5 GHz. The choice of 5 GHz frequency will provide a higher data rate, but the signal range will be smaller, and compatibility with older devices may be limited.

⚠️ Warning: Using an open network without a password makes your data vulnerable to interception.Always install encryption WPA2 PSK.

For advanced users, the Network Name Hiding (SSID) option is available. If you activate this feature, your Redmi 9 device will not broadcast the network name on the air. Connection to this point is possible only with manually entering the name and password, which significantly increases the level of protection against unwanted connections.

Remember to change your password regularly, especially if you have given access to third parties. Changing your credentials is a simple but effective measure that will block access to all previously connected devices. You can use a random character generator or come up with a complex combination yourself in the password settings menu.

Managing Connected Devices and Limits

Control of connected customers is an important function to avoid channel congestion and unauthorized traffic. MIUI It's a handy list that shows all the devices that are connected to your access point at the moment, IP-addresses and amount of data transmitted.

It allows you to set a tight limit on the number of gadgets you can connect, which is a useful option if you want to guarantee a certain speed for your devices or save battery power, for example, by setting a limit on one device, you will be sure that no one else will “get” to your Internet.

It also has the option of automatically turning off the access point if no one is connected to it for a given time, which helps to save significantly the battery power of the Redmi 9, which is consumed much faster when running in router mode, and is considered optimal interval of 5-10 minutes.

You can block specific devices in the list of connected users, and if you see a stranger on the list, just click on their name and select the lock option, and this action will instantly break the connection and prevent reconnection from this particular user. MAC-address.

Use of the USB-modem and Bluetooth

In addition to wireless connection, Xiaomi Redmi 9 supports the distribution of the Internet through the Internet USB-This method is especially relevant for desktop computers that do not have a Wi-Fi module, or in situations where maximum connection stability is required).

To activate the mode, you need to connect the smartphone to the computer through a high-quality USB-Once you connect to the settings menu, the item will be active «USB-"modem" that was previously unavailable. Enabling this item will start installing the necessary drivers in the computer operating system if they are not already installed.

Path to setup: Settings → Connection and Sharing → USB- Modem

Bluetooth is another option that can be useful in extreme cases, and the data transfer speed in this mode is much lower than Wi-Fi or USB, but the power consumption is also minimal, and this method is suitable for transferring small amounts of text information or working with instant messengers.

💡

Use the original cable to connect USB-Cheap charging-only cables don't transmit data and will not allow modem modem activation.

It is worth noting that when using USB-The modem charges the phone at the same time, which solves the problem of fast battery discharge. However, with prolonged operation in this mode, the battery can heat up, so it is better to remove the protective case for better heat sink.

Optimizing energy consumption and productivity

The access point mode is one of the most energy-intensive for a smartphone. The processor, radio module and screen (if it is on) consume significant current, which leads to rapid discharge and heating of the case. For the Redmi 9, as for many other models, it is important to monitor the temperature of the device during prolonged operation.

To minimize the load, it is recommended to turn off the screen immediately after connecting client devices, and close the background applications on the smartphone itself, which can consume traffic or CPU time, which will free up resources for a more stable distribution of the Internet.

⚠️ Warning: Do not cover your router phone with a pillow or blanket, which will cause overheating and possible trotling (decreased performance).

You can find energy saving modes in the battery settings, but when you are actively distributing the Internet, you should turn them off, because they can limit the operation of the network module. The optimal solution is to connect the phone to an external power source (power bank or socket) when you work in the access point mode for a long time.

If you notice that internet speeds have dropped, try restarting the Wi-Fi module or the smartphone itself. The accumulation of temporary errors in Android network services is a common reason for performance declines after long periods of non-stop work.

Solving Common Connection Problems

Despite the stability of MIUI, users may encounter situations where devices cannot see the network or connect to it.The first step in diagnosis should always be to check the status of mobile Internet on the phone itself.

A common problem is bandwidth incompatibility, and if a laptop or tablet is old, it may not support 5 GHz, and then you have to force the access point to 2.4 GHz in your settings, which will solve the network visibility problem for most older devices.

• 🔄 Reboot your smartphone and client device.
• 📡 Change the Wi-Fi channel in the advanced access point settings.
• 🗑️ Remove the saved network on the connected device and try again.
• 📞 Check if the operator has blocked the communication or distribution of traffic.

Sometimes carriers block the ability to distribute the Internet or require a special service to be connected. If all the settings are correct, but the Internet on the connected device does not work, contact your carrier's support, they can check the status of your SIM card and the availability of tariff restrictions.

💡

Most connectivity problems are solved by switching the frequency range from 5 GHz to 2.4 GHz or simply restarting the network module.