Wired Internet on Xiaomi TV: full instructions with nuances for all models

Connecting Xiaomi TV to the Internet via cable instead of Wi-Fi solves several problems: a stable signal without delay, no interference from other devices and faster downloading of content. 4K-TVs where high-resolution video buffering can spoil the viewing experience, but not all users are aware that even modern Mi models are not available. TV Redmi Smart TV Sometimes additional settings are required to work correctly with the wired connection.

In this article, we will not only explore the basic process of connecting an Ethernet cable, but also the nuances that the manufacturer often does not say, such as why the TV may not see the network on the first connection, how to choose the right category cable. Cat5e or Cat6, And what to do if the speed through the wire was lower than Wi-Fi. Special attention will be paid to models without built-in Ethernet port — for them there are workaround solutions using adapters.

What Xiaomi models support wired Internet

Most Xiaomi TVs are equipped with a connector RJ-45 For wired connections, but there are exceptions. Below is the current series compatibility table (2026):

If your model didn't make it to the table, check the specifications on Xiaomi's official website or inspect the back of the TV.The Ethernet port is usually marked with a "network cable" icon or an inscription. LAN. Some models (e.g. Redmi Smart) TV A55) The connector can be hidden under the removable cover.

⚠️ Note: Xiaomi TVs with a diagonal of less than 43 inches are often devoid of an Ethernet port).

What you need to connect: full checklist

Before you start setting up, prepare everything you need, and errors at this stage are the most common cause of a broken connection.

• 🔌 Ethernet-category cable Cat5e Or higher. 4K-Content is better chosen Cat6 — It supports speeds up to 1 Gbps.
• 📡 Router (router) with free LAN-Make sure the router is on. DHCP (handout IP).
• 🔧 Screwdriver (if the port is hidden by a plug or fastening).
• 📱 Smartphone or PC to check the Internet (in case of connection problems).

Cable length matters: if the distance from the TV to the router is more than 15 meters, use a shielded cable (marking) STP or FTP). Cheap unshielded cables (UTP) at a long length may lose the signal, which will lead to "suspend" video.

Important: If you are connecting your TV to the Internet for the first time, pre-record or take a picture of your Wi-Fi settings (network name and password). After switching to a wired connection, some Xiaomi models reset their stored Wi-Fi networks.

Step-by-step: how to connect the cable to Xiaomi TV

The connection process takes no more than 5 minutes, but requires accuracy.

1. Turn off the TV socket, and this will prevent any failures when you first connect the cable.
2. Connect one end of the Ethernet cable to the port LAN The jack should click with a slight click.
3. Put the other end of the cable in the free port LAN Avoid using tagged ports. WAN Internet – they are designed for an incoming connection from the provider.
4. Turn on the TV and wait for the system to load fully (about 30 seconds).
5. Open the Settings. → Network and Internet → The wired network. The system must automatically determine the connection.
6. If IP-address not assigned (state "No Network Access"), click Receive IP automatically or manually enter the settings (see Section 5).

After successful connection, a "network cable" icon with a tick will appear in the upper right corner of the screen. To check the speed, go to Settings. → On TV. → Network status. Normal indicators for Cat5e: 90–100 Mbps, for Cat6: 200–900 Mbps (depending on the provider’s tariff).

💡

If the TV doesn't respond to the cable connection, try rebooting the router. DHCP-The server is "hanging" and does not issue IP-addresses to new devices.

What to do if there is no Ethernet port on your TV

Xiaomi models without built-in connector RJ-45 (Like Mi. TV A2 "32" or "Redmi Smart" TV A32) You can connect to the wired Internet with external adapters:

Method 1: USB-Ethernet adapter

You will need an adapter with a chip. ASIX AX88179 or Realtek RTL8153 (They have better compatibility with Android. TV). Connection:

1. Insert the adapter in USB-TV port (preferably using the port) USB 3.0, if there is one).
2. Connect the Ethernet cable to the adapter.
3. Go to Settings. → Devices → USB Select the Ethernet Adapter Mode.
4. Reboot the TV.

The cost of such an adapter is from 500 before 1500 Before buying, check reviews about compatibility with Android TV 9/10.

Method 2: Wi-Fi Bridge (less reliable)

If you do not want to buy an adapter, you can use a smartphone or a second router in bridge mode:

• 📱 On your smartphone: turn on modem modem → USB-Modem and connect the phone to the TV through USB-Then on the TV, select the network settings. USB-Internet.
• 📶 On the second router, set it up as a repeater on the main network and connect the TV to it via Wi-Fi. This will not increase speed, but can stabilize the signal.

⚠️ Note: Chip-based adapters ASIX AX88772 It often doesn’t work with Xiaomi. TV You don't have any drivers in your firmware, so check the chip model with the vendor before you buy it.

Static adjustment IP and DNS: whenever

90% of the time, the TV automatically receives IP-router address (protocol) DHCP). However, sometimes manual adjustment is required:

• 🔄 If the router is rebooted frequently and the TV loses its connection.
• 🎮 To reduce ping in online games (via Google Stadia or Google Stadia) NVIDIA GeForce NOW).
• 🔒 If the provider blocks access to certain services (for example, YouTube or Netflix) through standard services DNS.

To set up a static IP:

1. Go to Settings. → Network and Internet → Wired network → Additionally.
2. Select Static. IP And enter the data: IP-address: 192.168.1.100 (for example) Mask: 255.255.255.0 Gateway: 192.168.1.1 (address of your router) DNS1: 8.8.8.8 (Google) or 1.1.1.1 (Cloudflare) DNS2: 8.8.4.4
3. Save the settings and restart the TV.

To check the correct settings, use the Speedtest service (available on Google Play for Android) TV). If the speed is lower than expected, try changing. DNS alternatively:

💡

Change of change DNS It can speed up content upload by 15 to 30 percent by optimizing routing, especially when you're watching overseas streaming services.

Solving common problems with wired Internet

Even after the right connection, errors can occur. Let's look at typical situations and how to fix them:

Problem 1: The TV cannot see the network ("Cable is not connected")

• 🔌 Check if the cable is tightly inserted into the port. Try reconnecting it on both sides.
• 🔄 Restart the router (turn off power for 30 seconds).
• 🛠️ If you use an adapter, try another one. USB-TV-port.
• 🔍 Examine the cable for damage (bending, rupture of the overflow).

Problem 2: No Internet access with a connected cable

• 📡 Check if it's on. DHCP on the router (in the router web interface, section) LAN or DHCP).
• 🔢 Manually assign. IP-address to the television (see section 5).
• 🚫 Turn it off on the TV. VPN or proxy in Settings → Network → Additionally.
• 🔄 Reset the TV network settings: Settings → System system → Reset → Resetting network settings.

Problem 3: Low cable speed (lower than Wi-Fi)

• 🔧 Replace the cable with Cat6 (if you use Cat5e).
• 📊 Check the load on the network through other devices (torrents, online games).
• 🔄 In the router settings, enable QoS (Quality of Service) and prioritize your TV over the Internet. MAC-address.
• 🔌 Connect the cable to another LAN-port on the router (some ports may be limited in speed).

Critical error: If after connecting the cable the TV stopped turning on or stuck on the logo, this may indicate a short circuit in the port.Switch off the cable immediately and contact the service center - self-repair can lead to loss of warranty.

Wireless and Wireless Connection Comparison: Which Is Best for Xiaomi TV

The choice between Ethernet and Wi-Fi depends on your tasks. Below is a comparison table:

For most users, the best option is hybrid use:

• 🎬 For a viewing. 4K HDR-Content, online games or video calls – Ethernet.
• 📱 For regular surfing, YouTube in the 1080p — Wi-Fi.

On Xiaomi models with Android TV 10+ You can quickly switch between types of connections in the Quick Settings menu (the button "Cog" on the remote control).

FAQ: Frequent questions about wired Internet on Xiaomi TV