How to turn on and configure TELE2 Internet on Xiaomi phone: the complete guide

You just installed it. SIM-map TELE2 Xiaomi's smartphone, but the internet isn't working? MIUI This problem is familiar to many users — according to the operator's statistics, about 15% of subscribers experience difficulties in the first setup of the Internet on Xiaomi devices. APN before software failures in firmware.

In this article, we will discuss all possible ways to turn on the Internet. TELE2 Xiaomi phones – from basic settings to hidden features MIUI, You'll learn how to manually prescribe parameters. APN, Reset network settings, check compatibility SIM-Maps with your Xiaomi model (including Redmi Note 12, POCO X5 And other popular devices, and what to do if the network appears, but the pages are not loaded. MIUI 14 and newer, but will also be suitable for older versions.

We'll focus on the typical setup mistakes that users make, for example, 80 percent of the time, the problem is solved by simply switching the network mode from "4G/3G/2G (auto)" to "4G only," but this is often overlooked. We'll also talk about how to get around carrier restrictions if your plan doesn't support 4G, but the phone "sees it."

1. Check the basic conditions before setting up

Before you get into the settings, make sure that the problem is not on the surface.

• 📶 Signal Level: The status bar should at least show 1-2 network division (if there is no signal at all, the problem may be in the SIM-map).
• 💳 Activation. SIM-maps: new map TELE2 It's activated within 15 minutes, but sometimes it takes up to 2 hours. SMS operator.
• 📱 Frequency support: Xiaomi for Russia usually supports bands TELE2 (B3, B7, B20), If you have a phone from China (models with a prefix) CN), Maybe there's a problem.
• 💰 Account balance: even with unlimited tariff, sometimes the Internet is blocked for a negative balance (check in *115#).

If at least one of the points is not met, further manipulation of the settings will not help. For example, if your Xiaomi 11T Pro is bought in Europe, it may not catch Russian 4G TELE2 frequencies at full capacity, in which case only a replacement phone or using Wi-Fi will help.

2. enable mobile Internet in the MIUI settings

The most obvious but often overlooked step is to activate the data transmission in the system. MIUI This setting can be disabled by default after installation SIM-Here's how to turn it on:

1. Open the Settings app (cog icon).
2. Go to section. SIM-maps and mobile networks.
3. Choose yours. SIM-map TELE2 (if).
4. Activate the mobile internet switch.
5. Make sure that the network type bar is 4G (recommended) or 3G (if 4G does not catch).

If the Internet is not working after these actions, check if the Save Traffic mode is activated in the same menu - it can block background data transfer. Also note the icon in the status bar: if instead of 4G or LTE, H+ or 3G burns, the speed will be limited.

💡

If the settings do not include Network Type, try entering ##4636### in the dialer, then select Phone Information → Install preferred network type → LTE only.

3. Set up APN access points for TELE2 manually

60% of Internet users fail due to lack of or incorrect settings APN (Access Point Name). TELE2 Usually automatically sends settings when you first activate. SIM-Maps, but on Xiaomi they may not apply due to the features MIUI. Here's how to add APN manually:

1. Go to Settings. → SIM-maps and mobile networks → [yours SIM TELE2] → Access points (APN).
2. Click on the three dots in the top right corner and select the New Access Point.
3. Fill in the fields according to the table below (leave the rest of the parameters unchanged):

Once you save a new access point, select it from the list and restart your phone. APN There is no way to create a new point, which means that SIM-The card is not recognized by the system - check its installation in the tray or try another one. SIM (for example, from MTS for diagnosis.

4. Compatibility issues SIM-maps and Xiaomi

Xiaomi smartphones, especially those imported from abroad, sometimes conflict with Russian ones. SIM-Here are the typical symptoms and solutions:

• 🔄 Constant switching between 3G and 4G: This means that the phone cannot hold the connection to the tower. TELE2. Try to manually select the network in the engineering menu (#4636## → "Phone information" → "Manually select the network").
• 🚫 Message "SIM-Map not supported": typical of Chinese Xiaomi models (e.g. Redmi) K50 market CN). The solution - firmware Global ROM or use of an adapter SIM.
• 📵 No signal at all: check if the contact is bent in the tray SIM-Cards (frequent problem with the POCO X3 Pro. Try inserting it. SIM In the second slot, if there is one).

You can use the NetMonster app (available on Google Play) to diagnose the frequency your Xiaomi is catching and how stable the connection is with the TELE2 towers. If the app shows that the phone sees the network but doesn't connect, the problem is with the APN settings or the operator lock.

Contact checks SIM-smear

SIM test on another phone

Checking Frequency Support via NetMonster

Resetting network settings (Section 5)

Firmware update MIUI-->

5. Network resetting and other radical methods

If none of the previous methods worked, it's time for heavy artillery. First try resetting the network settings - this will delete all stored Wi-Fi, Bluetooth and mobile Internet settings, but often solves the problem:

1. Go to Settings → About the phone → Reset settings.
2. Select Network Reset (not to be confused with a full reset!).
3. Confirm the action and wait for the reboot.

After resetting, you will have to re-enter your Wi-Fi passwords and set up your APN for TELE2 (see Section 3).

• 🔧 Update MIUI: Go to Settings. → The phone. → Update the system and install the latest version.
• 📲 Install a patch for the modem: some firmware has modem bugs (for example, Redmi Note 10 Pro on the MIUI The patches can be found on the forum. 4PDA.
• 🔄 Enable data roaming: strange, but sometimes helps – activate the option of data roaming in the settings SIM-cards, even if you are not roaming.

💡

Network resets are the most effective way to fix software failures, but only use them after checking the APN and the signal, and 30 percent of the time, this is the method that solves the problem.

⚠️ Note: If after the reset of the network the phone stopped seeing SIM-If you have a card at all, this may indicate a hardware malfunction of the slot. In this case, contact the service center - self-repair can lead to loss of warranty.

6.Problems with the tariff or blocking of the operator

Sometimes the problem isn't the phone, it's the TELE2 side.

• 📊 Tariff activity: send out USSD-request *115# and make sure you have an Internet packet connected. Even if the tariff is unlimited, sometimes you need to activate it.
• 🔒 Lock-in IMEI: If the phone was bought by hand, the previous owner could have put it on the wanted list. IMEI at imei.info.
• 🌍 Regional restrictions: TELE2 In some regions (for example, Crimea) it is limited.

If you suspect a lock on the part of the operator, call support TELE2 611 (free of charge with your SIM-You can reset your profile remotely on the server, which sometimes solves the problem without additional settings on the phone.

7. Alternative ways of connecting to the Internet

If the mobile Internet has not worked, but urgently need access to the network, use temporary solutions:

• 📶 Modem mode: connect the phone to the computer USB activate USB-modem in the settings Access Point and modem. Sometimes this bypasses the lock operator.
• 🔄 Wi-Fi from another device: Enable the access point on the second phone (e.g., with a SIM MTS or MegaFon and connect to it.
• 📡 Public Wi-Fi: Use open networks in cafes or malls as a last resort (but don’t enter bank passwords!).

For Xiaomi models with Dual support 4G (for example, POCO F4 GT) You can try to insert the second one. SIM-card of another operator and use it for the Internet until you solve the problem with the TELE2. The main thing is to specify in the settings which SIM data-transmitting.

Frequently Asked Questions (FAQ)