How to turn on Bluetooth on Xiaomi scooter: full instructions for all models

Why Xiaomi’s Bluetooth Scooter May Not Work The First Time

Xiaomi’s electric scooters are some of the most popular urban mobility devices, but their functionality goes far beyond simple driving. The built-in Bluetooth module allows you to connect a scooter to a smartphone to monitor speed, battery level, mileage and even adjust driving parameters. However, many users are faced with the fact that Bluetooth on scooters Xiaomi M365, Pro, 1S and newer models often requires pre-activation through a hidden menu or reset settings.

Complicating the problem, Xiaomi’s official documentation doesn’t always detail how to turn on Bluetooth, especially for older firmware versions. In addition, after a software update or prolonged downtime, the scooter can “forget” pairing with the smartphone, which requires re-configuration. In this article, we’ll look at all possible ways to activate Bluetooth, from standard connection via the app to manual methods for power users.

What models of scooters Xiaomi supports Bluetooth

Not all Xiaomi electric scooters are equipped with a Bluetooth module, here is a full list of models that support wireless connection to a smartphone:

  • 🛴 Xiaomi M365 — The first mass model with Bluetooth 4.0 (limited functionality)
  • 🛴 Xiaomi M365 Pro – improved version with advanced settings through the application
  • 🛴 Xiaomi 1S — Added firmware support via Bluetooth
  • 🛴 Xiaomi Pro 2 – Bluetooth 4.2 with a stable connection
  • 🛴 Xiaomi 3 Lite/3 – modern models with Bluetooth 5.0 and improved power consumption
  • 🛴 Xiaomi 4 Pro/4 Ultra – Latest Versions with Support for Xiaomi Home

If your model is not listed, it is likely that it is either not equipped with Bluetooth (for example, budget versions for children's use), or requires hardware improvements.

📊 What kind of scooter Xiaomi you have?
M365
Pro 2
1S
3 Lite
4 Pro
Another model

Method 1: Enabling Bluetooth via the official application

The easiest and most recommended method is to use the Mi Home app (for older models) or Xiaomi Home (for newer ones), which is suitable for most users and does not require technical skills.

Step instructions:

  1. Download and install the application: 📱 For Android: Xiaomi Home on Google Play 🍎 For iOS: Xiaomi Home in the App Store

Xiaomi

Settings → Bluetooth

Add device (+)

Transportation

Electric scooter

Follow the instructions on the screen: turn on the scooter (press the power button for 2 seconds) and wait for detection.

If the scooter is not present, try:

  • 🔄 Reboot Bluetooth on your phone.
  • 📱 Make sure that the distance between the devices does not exceed 5 meters.
  • 🔋 Check the charge level of the scooter (at a discharge below 20%, Bluetooth may be turned off).

Charge the scooter to at least 30% |

Turn on Bluetooth on your smartphone |

Install the latest version of Xiaomi Home|

Stay within radius. 3-5 scooter-->

Method 2: Manual activation of Bluetooth via scooter buttons

If the app doesn’t see the scooter or you prefer to do without a smartphone, you can turn on Bluetooth manually using a combination of buttons.This method works for most Xiaomi models, except for the newest ones (for example, the 4 Pro, where firmware is required).

Step-by-step:

  1. Turn off the scooter (hold the power button for 5 seconds).
  2. Hold it together: 🔘 Power button 🔄 Drive mode button (if any)

3-5 seconds before the beep.

blue

Bluetooth settings

Mi Scooter XXX

⚠️ Note: On some firmware, after manual activation of Bluetooth, the scooter can automatically turn off the module after 5 minutes of inactivity.

What to do if the scooter does not emit an audible signal?
If the scooter does not scream or flash blue after holding the buttons, the following reasons are possible: 1. Discharged battery - charge the scooter to 50% and try again. 2. Controller freeze - turn off the scooter, wait 10 minutes and try again. 3. Firmware failure - it may require flashing through the service center. 4. Mechanical breakage of the buttons - check if the buttons stick (especially after rain).

Method 3: Update firmware to restore Bluetooth

If Bluetooth was working before, but Suddenly was no longer detectable, the problem may be in outdated firmware. Xiaomi regularly releases updates to correct communication errors.

Steps to update:

  1. Connect the scooter to the Xiaomi Home app (if possible via USB or a temporary Bluetooth connection).
  2. Go to the device section → Settings (⚙️) → Firmware update.
  3. If the update is available, click Download and Install.
  4. Wait until the process is complete (the scooter will reboot automatically).

💡

Bluetooth on a Xiaomi scooter is not only a convenience, but also a potential vulnerability.Regularly update your firmware and monitor for suspicious activity in the application (for example, unauthorized connections).

FAQ: Frequent questions about Bluetooth on Xiaomi scooters

Can I connect a Xiaomi scooter to multiple phones at the same time?
No, Xiaomi scooters only support pairing with one device at a time. To connect to another smartphone, first break the connection in the Bluetooth settings on the first phone, then repeat the pairing procedure on the second.
Why did Bluetooth stop working after the firmware update?
This is a typical problem when switching to new software versions. Try: Reset the scooter to factory settings (power button 10 seconds); Remove the scooter from the list of devices in the Xiaomi Home app and add again; roll back the firmware to the previous version (only for power users!). If nothing helps, contact the service center - you may need to flash the controller.
How to check if Bluetooth is on a scooter without a smartphone?
On most Xiaomi models, active Bluetooth is signaled by a blue flash of the indicator on the control panel. You can also hear a short beep when the module is turned on (double beeping).
Can I use a scooter without Bluetooth?
Yes, Bluetooth is only for communication with your smartphone. All the basic functions (driving, brake, backlight) are autonomous. However, without connection, you can't: Update the firmware "over the air", view the statistics of trips, adjust the engine parameters (for example, speed limit). For basic use, Bluetooth is not necessary.
What if the scooter connects to Bluetooth, but the application does not see the data?
This problem is usually related to a software version conflict. Try: Reinstall the Xiaomi Home app. Update the scooter firmware to the latest version. Clear the app cache (phone settings → Apps → Xiaomi Home → Memory → Clear the cache). Try another smartphone (sometimes changing the device helps). If the problem persists, check if the antivirus or VPN connection to Xiaomi servers is blocked.