How to turn on auto dialer on Xiaomi Redmi 8T: Complete guide with pictures and tips

Xiaomi Redmi 8T — One of the brand’s most popular budget smartphones, but its functionality is often underrated, and Auto dialing (or automatic recalling) is a useful option for those who regularly encounter busy lines or communication failures. Unlike flagship models, where this feature can be hidden in the depths. MIUI, on the Redmi 8T Its activation has its own characteristics.

In this article, we will not only show where the auto dial switch is located, but also analyze the nuances of its operation on different versions of the firmware, explain why the feature may not work, and give recommendations for optimization. We will pay special attention to the differences between the standard phone application and alternative calls - this is critical for users who like to customize their Xiaomi.

If you have previously tried to enable auto call through Settings → System applications → Phone, but you didn't find anything -- don't be surprised. Depending on the regional firmware and version. MIUI We've tested every possible scenario on Redmi. 8T (codename willow and ready to share working solutions.

What is an auto dialer and why you need it on Xiaomi

Auto dial (or automatic re-call) is a feature that automatically calls back to a subscriber if the first call has been interrupted or the line has been occupied. 8T It works on two main scenarios:

• 📞 Busy – if the subscriber does not respond or his line is busy, the smartphone repeats the call at a given interval (usually 30-60 seconds).
• 🔄 Communication failure – when a connection breaks (for example, due to a weak network signal), the phone automatically tries to connect again.
• ⏱️ Time limit – you can adjust the number of attempts or the total duration of the auto dial.

In practice, the function is indispensable for:

• 🏢 Corporate users, where it is important to reach colleagues in poor communication.
• 👨‍👩‍👧‍👦 Relatives whose older parents often don't hear the first call.
• 🚗 Drivers who call on speakerphone in unstable coverage.

However, there are pitfalls: some mobile operators (e.g., mobile operators, Tele2 Or Yota, which can block frequent re-calls like spam, and auto dialing drains the battery faster on Redmi. 8T With its modest battery of 4000 mAh, this is noticeable when used intensively.

⚠️ Attention: On some firmware MIUI for Redmi 8T (Especially global versions) Auto dialing is disabled by default due to conflicts with Google services. If you don't find this option, check the version. MIUI In Settings → The phone.

Where is the setting of the auto dial in MIUI on the Redmi 8T

Depending on the firmware version, the path to setting up an auto dialer may vary, and we tested three of the most common scenarios:

If you don’t see the “Cover” item on the menu, try the following:

1. Update the Phone app via Google Play (if you use global firmware).
2. Check for a function in Settings → Special facilities → Communication services - on some firmware it is hidden there.
3. Install an alternative call (such as Truecaller or Google Phone) where auto dialing is implemented by default.

On the firmware MIUI 12.5 for Russia, auto dialing can be blocked by the operator - check this by inserting SIM-card of another provider (for example, MTS or Beeline).

Step-by-step instruction: how to turn on auto dial

Consider a universal way to activate an auto dialer that works on most versions. MIUI for Redmi 8T:

1. Open the standard application "Phone" (icon with a handset).
2. Press three points (⋮) in the upper right corner and select "Settings».
3. Scroll down to the "Additional" or "Director" section (depending on firmware).
4. Find the Auto-redial item and move the slider to the right.
5. Set up the parameters: 🔢 Number of attempts (recommended 3-5). ⏲️ Interval (optimum 45-60 seconds). 📵 Exceptions (you can add numbers for which an auto dialer is not required).

Once activated, the function will be active for all outgoing calls. To check its performance, call a busy number (for example, your second phone) - at a given interval, an automatic re-call should occur.

Call a busy number.|Wait for the first reset.|Make sure you have an automatic re-call|Check the number of attempts (should be in accordance with the settings)

-->

⚠️ Note: At some carrier rates (e.g. Tinkoff Mobile), frequent re-calls may be charged as separate connections.

What to do if the autophone is not working

If you have enabled a function but it does not work, the reasons may be as follows:

If none of these methods worked, try an alternative method through the engineering menu:

1. Open the Phone app and type ##4636##.
2. Go to the section "Phone Information".
3. Scroll down to the dialing settings block and turn on Auto redial.
4. Save the changes and restart the phone.

How to set up:

1. Install Google Phone from the Play Market.
2. Open the application and go to ⋮ → Settings → Calls. → Auto dial.
3. Activate the function and set the number of attempts (maximum 10).

2. Truecaller

Advantages:

• 🔹 Auto dial + spam-blocking.
• 🔹 Identification of unfamiliar numbers.
• 🔹 Customizable interval between attempts (from 10 seconds).

Disadvantages:

• ⚠️ Requires registration by phone number.
• ⚠️ Shows ads in the free version.

3. ExDialer

Advantages:

• 🔹 Lightweight application (total 5 MB).
• 🔹 Support for design themes.
• 🔹 Auto dial with the log of attempts.

How to set up:

1. Download ExDialer from Play Market or APKMirror.
2. Set the application to default in Settings → Annexes → By default. → Phone appendix.
3. In the call settings, turn on Auto Redial and specify the number of attempts.

Important: When using alternative calls, Xiaomi’s standard Phone app must be disabled (but not removed!) or conflicts may occur.

Optimizing Auto Dial: Tips for Redmi 8T

To auto dialer works more efficiently and does not drain the battery, follow these recommendations:

• 🔋 Limit the number of attempts — 3-5 times is enough for most scenarios. More attempts put the battery down hard.
• ⏳ Increase the interval to 60-90 seconds if you call mobile numbers (operators can block frequent calls).
• 📴 Use Wi-Fi Calling if you call over the Internet – this reduces the load on the operator’s network and reduces the risk of blocking.
• 📱 Add important numbers to your favorites – some calls (like Google Phone) allow you to set up separate rules for your favorite contacts.

It's also useful to know:

• 🔊 If during the auto dial the "In the plane" mode is turned on, the function will not work.
• 📶 With weak network signal (2G or EDGE) Automatic call may be triggered with delay.
• 🔄 If you use two of them SIM-The card will only work for the one that is currently active.

For advanced users: if you frequently call international numbers, you can enable the option “Ignore prefixes” in your auto dial settings, which will help you avoid problems with formatting numbers (for example, for example, for the first time, +7 vs 8).

💡

On the Redmi. 8T firmware MIUI 12.5 and later auto dialer consumes up to 5% battery power per hour when used actively. To reduce consumption, disable the function for unimportant contacts.

Frequent mistakes and their solutions

Even after setting up the auto dialer correctly, it can malfunction, and let's look at the typical errors and how to fix them:

⚠️ Warning: If the phone starts calling the last numbers spontaneously after activating the auto dial, it is a sign of a virus.

If none of the solutions worked, try resetting your network settings:

1. Go to Settings. → SIM-maps and mobile networks → Resetting network settings.
2. Confirm the action (this will not delete your contacts or files).
3. Reboot the phone and reset the auto dial.

In the extreme case, you can take advantage of ADB-command to force the function to be enabled (unlocked bootloader required):

adb shell settings put global auto_redial_enabled 1


adb shell settings put global auto_redial_delay 60000

Where 60,000 is the interval in milliseconds (in the example of 60 seconds).

FAQ: Answers to popular questions