How to turn on auto dial on Xiaomi Mi 9 Lite: instructions with pictures and tips

The auto dial feature on Xiaomi smartphones is a useful tool that automatically repeats dialing if a subscriber is busy or not responding. on the Mi 9 Lite model (also known as the Mi 9 Lite). CC9 In China, this option works through the standard Phone app, but its settings are not obvious, and many users have difficulty finding this feature, especially after the update. MIUI Up to new versions where the interface changes.

In this article, we will discuss in detail how to activate the auto dialer on Xiaomi Mi. 9 Lite, consider the nuances of the function on different versions of firmware (including: MIUI 12/13/14), We will also give recommendations on how to eliminate typical problems, and we will pay special attention to compatibility with telecom operators (MTS, Beeline, MegaFon, Television).2) Alternative ways of setting up through the engineering menu.

What is an autodialer and why you need it on Xiaomi Mi 9 Lite

Auto dialing (or automatic recalling) is a feature that makes it easier to communicate in situations where the subscriber is temporarily unavailable. Instead of manually dialing again, the smartphone does it itself at specified intervals. On the Mi 9 Lite, the function works according to the following principle:

• 📞 If the subscriber does not respond or his line is busy, the phone automatically repeats the call.
• ⏱️ The interval between attempts can be adjusted (usually from 5 to 30 seconds).
• 🔄 The number of repetitions is limited (by default - 3-5 times, depends on the firmware).
• 📵 The function is disabled if the subscriber dropped a call or turned off the phone.

The benefits of auto dialing are obvious for business users, taxi drivers, couriers or those who frequently call hotlines, such as when trying to call a bank or carrier's support, the feature will save time by eliminating the need for multiple manual dialing.

• ⚠️ Not all operators support auto dialing at the network level (depending on the tariff).
• ⚠️ The function may not work when active flight mode or disabled mobile Internet.
• ⚠️ On some versions MIUI The option is hidden in the engineering menu.

Where is the setting of the auto dial in MIUI

Depending on the firmware version, the path to setting up an auto dial on the Xiaomi Mi 9 Lite may differ. MIUI The 12-14 option is moved to the bottom of the menu, which causes confusion:

Method 1: Using the standard "Phone" application

This is the easiest method that works on most Xiaomi devices. MIUI 11 and newer. Follow the instructions:

1. Open the Phone app (the tube icon on the home screen).
2. Press three points (⋮) in the upper right corner and select Settings.
3. Scroll down to the Additional Settings section (or some versions).
4. Find Auto dial (may be called Automatic recalling).
5. Activate the slider and adjust the re-call interval (e.g., 10 seconds).

If the auto call is not on the menu, then your version MIUI It doesn’t support it directly – move on to the second method.

Method 2: Engineering menu (for advanced users)

On some firmware (especially custom or older versions) MIUI) The auto dialer is hidden in the engineering menu to activate it:

1. Open the phone app and enter the combination: ##4636##
2. In the menu that appears, select Phone Information (or Phone Information).
3. Scroll down to the Redial Settings section.
4. Set a tick against Enable Auto Redial and set the interval.

⚠️ Warning: Changes to the engineering menu can cause network failures. Do not edit other settings unless you are sure of their purpose!

Check the version of MIUI in Settings → About the phone

Make sure that SIM-The card is active and catches the network

Close all background applications that interfere with calls

Make a backup of settings (in case of failure)-->

Step-by-step instructions for the inclusion of an auto dial-up

Let’s analyze the activation process of the function on the example of Xiaomi Mi 9 Lite with MIUI 12.5 If you have a different firmware version, the steps may vary slightly, but the overall logic is maintained.

Step 1: Verification of operator support

Before setting up an auto dial on your phone, make sure your carrier doesn't block this option.Some rates (especially corporate or budget) limit automatic re-calling.

• 📱 Call any number and wait for the “busy” signal».
• 🔄 If after the call is completed, the phone itself offers to try again - the function is supported.
• 📵 If there is no re-call, please contact the operator (for example, MTS at 0890, Beeline - 0611).

Step 2: Activate Auto dial in settings

If the operator does not block the function, follow the following steps:

1. Open the phone application → Settings (three points in the corner).
2. Go to Additional Settings → Auto dial.
3. Turn on the slider Automatic re-call.
4. Set the interval between attempts (recommended 10-15 seconds for a balance between persistence and battery saving).
5. Save the settings and exit.

Important: Some firmware requires a phone restart after activation of the auto dial to make the changes take effect.

Step 3: Testing the Function

Check if the auto-desk is working correctly:

1. Call a number that is guaranteed to not respond (like your second phone in Do Not Disturb mode).
2. After the signal "busy" wait for an automatic re-calling (a countdown timer should appear).
3. If the call does not repeat, check the settings again or refer to the "Problem Solving" section.

💡

If the auto dial doesn't work with a specific number, try adding it to Contacts and repeat the test, and sometimes the function ignores numbers that aren't saved in the phone book.

Setting the interval and the number of repetitions

By default. MIUI It sets the auto dial interval of 10 seconds and limits the number of repeats to 3 times, but you can change these parameters to suit your needs.

How to change the interval between calls

Most versions MIUI The following range options are available:

To change the interval:

1. Go to your phone settings. → Auto dial.
2. Click on the Interval field and select the appropriate value.
3. Save the changes.

Too short a time interval (for example, 5 seconds) can irritate the caller you are trying to reach, as well as drain the battery faster.

How to Increase the Number of Repeated Calls

Unfortunately, in the standard settings MIUI The number of repetitions is strictly limited (usually 3-5 times:

• 🔧 Use third-party apps (e.g. AutoRedial from Google Play).
• 📱 Enable auto dial through the engineering menu (see section above).
• 🔄 After the replay limit is exhausted manually press “Repeat the call” in the journal.

⚠️ Warning: Excessive number of automated calls may be considered as spam by the operator, which will lead to a temporary lock of your number!

Solving Auto dialing problems

If the auto dial on Xiaomi Mi 9 Lite does not work or does not work correctly, the reasons can vary from firmware failure to operator limitations.

Problem 1: Auto dialing is not activated

If the Slider Auto dial in the settings is inactive or absent:

• 📌 Check if your version supports it. MIUI This function (on some custom firmware it is disabled).
• 📌 Update the phone app via Google Play or MIUI App Store.
• 📌 Reset the settings of the Phone application in Settings → Annexes → Phone. → Warehouse → Drop it.

Problem 2: Auto dialing works, but not dialed

If the phone repeats the call but the connection is not established:

• 📡 Check the signal level of the network (you may be in a poor coverage area).
• 📡 Switch from 4G on 3G In Settings → SIM-maps and mobile networks → Preferred type of network.
• 📡 Make sure you have enough money in your account (some operators block outgoings with zero balance).

Problem 3: The function itself is shut down

If the auto dial is periodically deactivated:

• 🔄 Check if the app is disabling it to save battery (like Security or Battery Saver).
• 🔄 Add the Phone app to optimisation exclusions in Settings → Battery → Optimizing the battery.
• 🔄 Update the firmware to the latest version MIUI (In new builds, bugs are often corrected).

Alternative ways to set up an auto dial

If the standard methods don't work, you can use third-party solutions, and let's look at two reliable options.

Method 1: Application AutoRedial

AutoRedial is a popular automatic recalling app that works even on devices where the standard function is disabled.

• 🔧 Flexible interval settings and number of repetitions.
• 📱 It works on all versions of Android (including Android). MIUI).
• 📊 Keeps a repeat call log.

To set up:

1. Download AutoRedial from Google Play.
2. Open the app and give permission to call.
3. Set the interval and the number of repetitions.
4. Add the app to the autoboot so that it works after the phone restarts.

Method 2: USSD-operator

Some operators (for example, MTS or Beeline) offer their own auto dialing services through the Internet. USSD-To activate commands:

• 📞 For MTS: send a team *111*555# and follow the instructions.
• 📞 For Beeline: dial *110*09#.
• 📞 For MegaFon: the service is called “Autophone” and is activated through the personal account.

Operator services are usually paid (from 1-3 rubles / day), but they work more stable than software solutions.

💡

Standard auto dial in MIUI limited to 3-5 repetitions, while third-party applications allow you to configure up to 10 or more Attempts.

FAQ: Frequent questions about auto dialing on Xiaomi Mi 9 Lite