Are you tired of manually calling back subscribers when a line is busy or dropped? The auto dial feature on Xiaomi Redmi 9 solves this problem - the smartphone itself repeats the attempt to connect at specified intervals. But where to look for this setting in MIUI if it is not in the standard call menu? We tested all methods on firmware from MIUI 12 to MIUI 14 and identified working methods, including hidden ones.
This article provides not only basic instructions, but also unique data on the limitations of the Redmi feature. 9: Why Auto dialing may not work with some operators (e.g., Telephone)2), How to bypass the lock through the engineering menu, and why the interval between attempts can not be made less 15 We'll also look at alternative applications for those who need advanced settings, with a comparison table.-3 utility from Google Play.
What is an auto dialer and why you need it on Xiaomi
Auto dial (or automatic re-call) is a feature that causes a smartphone to call back to a subscriber on its own if:
- 📞 Line occupied (signal "occupied»)
- 📵 Challenge dropped due to poor communication
- ⏱️ The customer did not respond (after 30).+ horn-second)
On Redmi 9, the feature runs through MIUI software, but its implementation depends on the firmware version and regional settings. For example, in European MIUI EU builds, the auto dialer can be disabled by default due to legal restrictions (in some countries, automatic dialer is considered spam), in global and Chinese versions it is usually available, but hidden in the depths of the menu.
🔍 Important: Auto dialing does not work if the caller manually resets the call or has activated Do Not Disturb mode, and the function is useless when the operator locks the number (for example, a complaint of spam).
Official way: where to look for auto dialing settings in MIUI
In the latest versions of MIUI 13/14, the path to setting up the auto dial has changed, it used to be on the Calls menu, now it's moved to the Additional Features section.
- Open the phone application (pipe icon).
- Slip on three dots in the upper right corner → select Settings.
- Scroll down to the Additional Functions block.
- Find Auto dial (or Repeat call in English firmware).
- Activate the slider and adjust the interval between attempts (available options: 15, 30, 60 seconds).
⚠️ Note: if AutoCall is not on the menu, your firmware may be cropped (e.g., carrier version) in which case try updating the software or using alternative methods in the next section.
Check the version of MIUI in Settings → About the phone
Make sure that SIM-The card is active and catches the network
Turn off the “Do Not Disturb” and “Traffic Saving” modes
Update the Phone app to Google Play (if available)-->
Hidden ways to turn on auto dial if it is not in the settings
If the standard method didn’t work, try these proven options:
1. through the engineering menu (for advanced users)
This method works on Redmi 9 with any firmware, but requires caution:
##4636## → Select Phone Information → Select SIM → Find Auto Redial (could be called Redial Setting).🔴 Warning: Do not change other options in the engineering menu – this may disrupt the network!
2. With the help of USSD-operator code
Some operators (such as MTS or Beeline) support activation of auto dialing via USSD.
- 📶 For MTS: *111*123# (Then select “Autophone” in the menu).
- 📶 For Beeline: *110*09# → point 5 «Additional services».
MegaFon and Tele2 do not have such a service - they block auto dialing at the network level.
3. Through third-party applications
If the built-in methods don’t work, install one of these apps (tested on Redmi 9):
| Annex | Dial-up interval | It works without a root. | Cons |
|---|---|---|---|
| AutoRedial | 5-120 seconds | Yes. | Advertising requires permission to call |
| Redial Pro | 10 to 300 seconds | Yes. | Paid version for the interval <15 seconds |
| Call Back | 15-60 seconds | No (root needed) | Tough setup |
💡 Tip: Before installing third-party utilities, check reviews – some apps may abuse permissions (e.g., send permissions) SMS pay-per-room).
Why can’t the phone work even after setting up?
Limits of Auto dialing on Xiaomi Redmi 9: what you need to know
Even if you successfully activate the function, consider these nuances:
⚠️ Attention: Redmi 9 with firmware MIUI 12.5 and below, the auto dialer only works when the screen is active. If the phone is locked or in sleep mode, the re-calls don't work. MIUI 13+.
- ⏳ Maximum number of attempts: 5 (then you need to manually start the dial again).
- 🔋 Battery consumption: with active auto dial-up, energy consumption increases by ~10-15% due to constant operation of the communication module.
- 📵 Poor communication: if the network is unstable, the smartphone can “hinge” on the dial, even if the subscriber is already responding.
📊 Test on Redmi 9 (MIUI 14): we tested the auto dial at intervals of 15 seconds in low signal conditions (1-2 network division).Result: out of 10 attempts, 6 were successful, but in 2 cases the smartphone “did not see” that the subscriber picked up the phone and continued to dial.
💡
If the auto dialer is triggered too often and drains the battery, set the interval of 60 seconds and limit the number of attempts to 3. This will reduce the load on the communication module without losing functionality.
How to disable auto dialer on Xiaomi Redmi 9
If the function becomes intrusive (for example, it is diverted to non-existent numbers or spends money on toll lines), it can be deactivated:
- Go to the phone → Settings → Additional functions.
- Find the Auto dialer and move the slider to the left.
- For third-party applications: Open program settings and turn off dial-up service, then remove permissions to call Settings → Apps → Permissions.
❗ Important: after the shutdown, check if the operator's services are still active. For example, MTS's auto dialer may be tied to the tariff. USSD *111*0887# (check-up).
Frequent mistakes and how to fix them
Redmi 9 users often face these challenges:
| Problem. | Reason. | Decision |
|---|---|---|
| Auto dialer's off. | Outdated firmware | Update MIUI to 13.0.5+ via Settings → Software Update |
| It only works 1 time. | Limitation of operator | Call in support and request the activation of the service "Multi-Dialphone" |
| Phone overheats | Too short interval (<15 seconds) | Set the interval of 30+ seconds or turn off the function |
🔧 One of our readers complained that the auto dial on Redmi 9 worked only with the first one. SIM-The second slot was a virtual card (Tele2). SIM (eSIM, and MIUI It doesn't support an auto dial for eSIM in this model. SIM first-place.
Alternatives to auto dialing: what to do if nothing helps
If built-in and third-party methods have not worked, consider these options:
- 🔔 Notifications for Missing: Enable in Settings → Notifications → The phone is the option to "Remind us of the missed." The smartphone will show a notification if the subscriber did not respond.
- ⏱️ Alarm clock: Use the Tasker app (requires settings) to create a task: “If the call is reset” → wait 30 seconds → call back».
- 📞 Voice Assistant: Configure Google Assistant to “Call Back to the Last Number” (works through Settings) → Voice assistant → Teams).
💬 An expert comment: “On Redmi 9, auto dialing is more of a crutch than a full-fledged feature. If it’s critical to reach busy customers, consider buying a smartphone with VoLTE and Wi-Fi Calling (like the Redmi Note 11).” These technologies reduce the number of drops of calls by 3-4 times.»
💡
On Xiaomi Redmi 9 auto dialer works only with physical SIM-For virtual sims and operators with strict policies (Tele2, Yota), it is better to use third-party applications or alternative methods.