How fast to find MAC-Xiaomi TV address: all working methods

When you need to connect a Xiaomi TV to a local network with filtering by MAC-The first thing you need to do is to get to the address or prioritize the traffic on the router, and you need to know that unique identifier. MAC It is displayed in two clicks, on Smart. TV The path to this information isn't always obvious, especially if you're talking about PatchWall models or older firmware versions, where the settings menu is different from standard Android. TV.

In this article, we will discuss 5 Proven ways to find MAC-Address on Xiaomi Mi TVs TV (including the Mi series TV 4/4S/4A/4C/5/5X/Q1/Q2 From the classic way through settings to little-known life hacks using a router or a mobile app, and we'll also find out why sometimes you're a part of the world. MAC-The address on the label and in the system do not match – and what to do about it.

1. Method: through settings of the TV (most reliable)

It's a universal method that works on all Xiaomi models, regardless of the firmware version. The interface may be slightly different, but the logic remains the same. You don't need any additional devices, just a remote control.

Step-by-step:

• 📺 Turn on the TV and go to the main screen (Home button on the remote).
• ⚙️ Open Settings (the gear icon in the upper right corner).
• 🌐 Select the Network and Internet section (or Wi-Fi and Networks on older models).
• 🔗 Click on the name of your current network (connected via Wi-Fi or cable).
• 📋 Scroll down to the Additional Information block - here will be a line MAC-Address (may be called Wi-Fi Address or Physical Address).

Turn off and connect again |Reboot the TV |Check out if the partition is hidden in child mode |Update the firmware to the latest version-->

On some firmware (e.g. PatchWall 3.0+), the path might look like: Settings → Device → About TV → Network Status. If you have a Mi TV Stick or Mi Box, the algorithm is similar, but the menu item is called About Device.

⚠️ Note: On TVs with dual Wi-Fi (2.4 GHz) + 5 GHz) can be displayed two MAC-Addresses are different for each range. Use the one that corresponds to the current frequency to connect to the router.

2. Method: Look at the back of the TV

Fastest, but not always accurate, method: the factory label (usually on the back cover or stand) is listed. MAC-The Wi-Fi address of the module may be different from what the system shows if:

• 🔧 TV repaired with the replacement of Wi-Fi module.
• 🔄 The manufacturer used backup addresses (found on early Mi batches) TV 4A).
• 📡 There are two network interfaces in the device (e.g, eth0 for Ethernet and wlan0 wifi).

How to find the label:

• 📏 On the Mi models TV Q1/Q2 The sticker is located on a metal frame at the back, closer to the ports.
• 🖼️ On Mi. TV 4S/5X — under a plastic cover covering the connectors (need to be carefully screwdriver).
• 📺 On Mi. TV Stick or Mi Box – on the underside of the case.

MAC-The address on the label is usually indicated as:

• Wi-Fi MAC or WLAN MAC
• MAC Address (unspecified)
• ETH MAC is a wired connection address (Ethernet), it is not suitable for Wi-Fi settings!

3. Method: via the router's web interface

If the TV is already connected to your network, you can recognize it. MAC-address through the router control panel. This method is suitable when:

• 🔌 No access to the TV's remote or menu.
• 🔍 You need to check several devices at the same time.
• 🛠️ You set up the filtering by MAC router.

Instructions for popular routers:

If the TV is connected by cable, look for it in the Local Area Network or Ethernet Clients section. MAC-wire-dress (eth0) It will be different from Wi-Fi (wlan0)!

⚠️ Note: Some routers are cloning MAC-Addresses of connected devices to circumvent the provider's restrictions, in which case the list of customers may appear MAC It's a router, not a TV. To check this, compare the address to what's on the router's label.

Xiaomi/Redmi|TP-Link|ASUS|Keenetic|D-Link|Other-->

4. Method: via the Mi Home app (for smart TVs)

If your Xiaomi TV is integrated into the Mi Home ecosystem (e.g., Mi AIoT-enabled models), you can find out more about the phone. MAC-This is a convenient way to use the mobile app when the TV is connected to your Xiaomi account, but the remote is not available.

Step-by-step:

1. Open the Mi Home app on your smartphone and log in.
2. Go to the Devices tab and find your TV (e.g. Mi TV Q1 75).
3. Slip on the device, then select Settings (⚙️ top-right).
4. Scroll down to the device information block - here will be a line MAC-address.

Please note:

• 🔄 The appendix may be displayed MAC-Bluetooth address (if the TV supports Mi Remote) is different from Wi-Fi MAC!
• 📱 If the TV doesn’t show up in Mi Home, make sure it’s tied to the same account as the phone.
• 🔌 For models without Mi AIoT (e.g. old Mis) TV (3) This method does not work.

💡

If the TV doesn't connect to the Mi Home, try resetting it to factory settings, then re-bind. To do this, press the Power button on the remote for 10 seconds until the recovery menu appears.

5. Method: via ADB (for advanced users)

This method is suitable if the standard methods did not work and the TV is running on Android TV (for example, Mi TV 4S or Mi Box S).

• 🖥️ Computer with installed ADB and drivers for Xiaomi.
• 🔌 USB-cable (to connect the TV to the PC).
• 📱 Included debugging by USB TV settings.

Instructions:

1. Turn on USB Debugging on TV: Settings → About TV → Software Version → Click 7 times on the build number → Return to Settings → For developers → Debugging on USB
2. Connect the TV to your computer via USB (USB 3.0 port on your TV).
3. Open the command line on your PC and execute: adb devices If the device is defined, type: adb shell ip link show wlan0 or for wired connection: adb shell ip link show eth0
4. Find the line in the conclusion link/ether — after that MAC-address.

Example of team withdrawal:

wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DORMANT group default qlen 1000


link/ether 1c:ab:34:d5:67:ef brd ff:ff:ff:ff:ff:ff

⚠️ Note: Some Xiaomi firmware debugging USB It's disabled by default and doesn't turn on through the menu, and in this case, you'll have to use Fastboot to unlock, which can lead to a loss of warranty.

Frequent problems and solutions

Sometimes. MAC-Xiaomi's TV address can't be found in the standard way. Let's look at typical situations and their solutions:

Problem 1: MAC-The address is not displayed in the network settings

Possible causes and actions:

• 🔄 Reset Network Settings: Go to Settings → Network → Reset network settings and reconnect.
• 📡 Wi-Fi module disabled: On some models (Mi) TV 4A) The module can shut down when it's overheated.
• 🔧 Damaged firmware: Update the software through Settings → Updating the system.

Problem 2: MAC-The address on the label is not the same as the real one.

This is normal for devices with:

• 🔧 Replaced Wi-Fi module (for example, after repair).
• 📦 Clone MAC (squirrel).
• 🔄 Dynamic Address Generation (on PatchWall 4.0 firmware)+).

Solution: Use MAC-Address from the TV settings, not the label.

Problem 3: TVs are not connected to the network after changing the MAC

If you've manually changed MAC-address (e.g. through ADB), The router can block the device:

• ⚙️ Restart router and TV.
• 🔄 Drop it. MAC-filter on the router or add a new address to the whitelist.
• 📡 Connect the TV over cable (Ethernet) and check MAC via adb shell ip link show eth0.

💡

If the TV stops connecting to Wi-Fi after updating the firmware, reset the network settings to factory. To do this, press the Menu + Volume Down buttons on the remote when you turn on the TV.

FAQ: Answers to Frequent Questions