In the era of ubiquitous digitalization, the local network is becoming the foundation for the exchange of data between devices. If you own a Xiaomi smartphone, you may need to access its network identifiers to set up a file sharing service, organize remote access, or diagnose connection issues. IP-addressing within your home network, opens up ample opportunities for managing gadgets.
Often users are faced with the need to skip ports or configure a static address, but do not know where to start searching for current parameters. MIUI Or HyperOS, this information is hidden in multiple menu levels, which can be confusing to an inexperienced owner. We'll look at all the current ways to get this data, from standard settings to advanced methods for obtaining the data. IT-specialist.
Knowing your device's current address on the network is the first step to properly administering your home Wi-Fi space. FTP-Or you can stream video to your TV, and let's take a look at the algorithms that will help you get the numbers you want quickly.
Search for IP through standard Android settings
The easiest and most affordable way to find out the current IP-The address of your Xiaomi is to use the built-in interface of the operating system, so you don't have to install third-party utilities or connect the cable to your computer, just unlock the screen and go to the settings menu, which is the control center of the entire device.
The MIUI interface may vary slightly depending on the firmware version, but the logic remains the same across all models. You need to find the wireless connection section that displays the status of the current network, and that's where the system stores all the technical connection information, including the default gateway and the subnet mask.
The algorithm of actions is as follows:
- 📱 Open “Settings” and select “Wi-Fi».
- 📡 Click on the name of the network you are currently connected to or the arrow next to it.
- ℹ️ In the window open, find the field «IP-address where the required data is displayed.
- 🔄 If the address is not visible immediately, click the “More” or “More” button».
⚠️ Note: If you see an address that starts with 169.254.x.x, This means that the device has not been able to get the correct IP In this case, the Internet connection will not work, and you need to restart the router.
It’s worth noting that modern versions of Android often display addresses of both IPv4 and IPv6. For most LAN tasks, such as port browsing or FTP setting, you’ll need an IPv4 address, which usually consists of four numbers separated by dots. Make sure you copy or remember it.
Using the Wi-Fi Settings app for details
Xiaomi smartphone owners have access to an extended wireless network management menu that is hidden deeper than the standard switch. DHCP-This is especially useful if you are setting up a static distribution of addresses on a router.
To get into this menu, you need to do a few taps. First go to the Wi-Fi settings, then click on the gear icon or the arrow on the right for the active network. In the settings list that opens, scroll down to "Additional" or "IP settings." Here you can switch from DHCP to "Static" to fix the address manually.
When entering data manually, be extremely careful:
- 🔢 The gateway address must match your router’s address (often 192.168.1.1).
- 🛡️ The network prefix is usually 24 bits long (mask 255.255.255.0).
- 🌐 DNS-servers can be manually specified, for example, from Google (8.8.8.8.8).
💡
Before changing the settings IP Static, write down the current values DNS-servers. Use of incorrect DNS This could cause the phone to stop working even though Wi-Fi is connected.
Changing these settings may be necessary for game servers or specific remote management applications. However, in most cases, standard DHCP settings are sufficient for stable operation. If you do change your settings and lose access to the network, just select the option “DHCP” in the same menu to reset the settings to factory ones.
Check IP through the About Phone menu and status
The classic path through the About Phone menu also allows access to network information, although less obvious to beginners. This section contains all the aggregate information about the device, including the information that is available to the user. IMEI, firmware MAC-interface addresses. IP Here, a few additional steps will be required.
Search the "About Phone" section of the main settings menu and go to "All Features" or "Status" section, and here you'll see a list of all active interfaces. If Wi-Fi is connected, it's a hotline. IP-The good thing about this method is that it works even if the Wi-Fi settings interface is temporarily unavailable or is glitchy.
The table below shows the main parameters that can be found in this section:
| Parameter | Description | Example of meaning |
|---|---|---|
| IP-Wi-Fi address | Current address on the local network | 192.168.1.45 |
| MAC-Wi-Fi address | Physical address of the network interface | A4:5E:60:C2:11:22 |
| State of the network | Connection status | Connected. |
| Connection speed | Current link speed | 72 Mbps |
The use of the "Status" section is especially important when diagnosing problems when you need to verify the MAC-address with the ones listed on the router's whitelist. Sometimes the system may display randomized MAC-Address to improve privacy, which should be considered when setting up filtering on the access point.
Why? MAC-address may change?
Use of ADB and Command Line for Experts
For advanced users and system administrators, the most accurate way to get network information is to use the Android Debug Bridge (ADB) debugging tool, which allows you to interact with the operating system at a low level, receiving data that is not displayed in the GUI. You will need a computer with an ADB installed and a USB-connected smartphone.
Before you start, you need to activate the developer mode. Go to About Phone and quickly click on the MIUI build number seven times. Then a new "Developers" option will appear in the settings menu, where you need to turn on "Debugging by USB." Connect the phone to your PC and confirm the request for debugging permission on your smartphone screen.
For receipt IP-Enter the following command in the terminal:
adb shell ip addr show wlan0This command will provide detailed information about the interface wlan0, You'll see the output line "inet" followed by the address you're looking for. If you're using the mobile Internet, replace it with the output line. wlan0 on rmnet_data0 or similar cellular network interface.
⚠️ Note: When connecting to USB In debugging mode, always check the name of the computer you're connecting to. Connecting to unknown PCs can theoretically allow you to access data if the device is not locked with a strong password.
Using ADB also allows real-time tracking of network changes, which is indispensable for debugging network applications. You can run a command in a loop or use adb logcat to monitor network events of the Android system.
Defining the address through the terminal on the device itself
If you can't connect to a computer, but you need command line data, you can use a terminal emulator directly on Xiaomi, and you'll need to install any terminal application from Google Play, like Termux, which will turn your phone into a full-fledged Linux-like console.
Once you install the application, run it and type in the ip addr or ifconfig command. The system will give you a list of all network interfaces. Find a block starting with wlan0 for Wi-Fi or ccmni/rmnet for mobile Internet. Next to the inet label will be your current IP.
Advantages of using the terminal on the device:
- 🚀 Instant access without the need to connect cables.
- 💻 The ability to use scripts to automatically configure the network.
- 📂 Access to system logs and network configuration files.
☑️ Checking the terminal settings
It is worth considering that some teams may require root rights for full access to all information, but basic browsing is a good idea. IP-And the average user can access the address, and it's a great way to quickly check the network configuration without leaving the screen.
Viewing Connected Devices in the Router
The most reliable way to see the whole picture is to look into your router’s admin panel, which shows all the devices that are currently online, including your Xiaomi, and it’s good because it shows how the router sees your phone and lets you check if there’s a conflict. IP-addresses with other gadgets.
Log into the router interface (usually at 192.168.0.1 or 192.168.1.1) and look for the Customer List, DHCP Clients, or Network Map section. Find the device by name (often called Xiaomi or a phone model) and look at the assigned IP. Here you can pin the address so that it doesn’t change after the reboot.
The static DHCP address fix provides:
- 🔒 Stable operation of remote access to files.
- 🎮 Correct operation of game servers and hosts.
- 📹 Uninterrupted recording with IP-camera-recording.
💡
Fixing IP-postage MAC-The best way to ensure constant access to the device on the local network without manual settings on the smartphone itself.
If you can’t find your device on the list, try turning off and re-enable Wi-Fi on your phone to initiate a new request to the phone. DHCP-Also make sure that the phone does not have the random function on it. MAC-address" which may interfere with the identification of the device by the router.