Xiaomi Redmi 9 has proven to be a reliable budget device, but owners often face unstable mobile Internet or Wi-Fi connection speeds. Problems can be software failures of the MIUI operating system, incorrect access point settings, or even the physical limitations of the antenna module. Understanding the reasons for the slow network is the first step to effectively eliminate them.
In most cases, you can make a difference without going to the service center using the built-in tools of the system. Optimizing network settings allows you not only to increase the speed of loading pages, but also to reduce ping in games, which is critical for modern mobile applications. We will analyze proven methods that will help you to get the most out of the capabilities of your device.
Before we go to complex manipulations, it is worth eliminating trivial factors, such as overloading the communication channel or temporary failures at the provider. DNS-A server to a public server (e.g. Google or Cloudflare) often solves the problem of long server responses.
Diagnostics and basic network settings
The Redmi 9’s Internet speed up process starts with a deep diagnosis of the current connection status. Often, the system automatically selects the not optimal type of network or gets stuck in EDGE/3G mode due to a weak signal in a particular location. Switching modes can instantly change the situation.
Go to the settings menu and select a paragraph SIM-maps and mobile networks, and you need to consider the preferred type of network. LTE. If there is coverage in your area 4G unstable, the phone will constantly jump between standards, causing connection breaks.
- 📡 Check the signal strength: If there are less than two divisions, try changing the position of the phone or approaching the window.
- 🔄 Reboot the device: This will reset the temporary caches of the network module and re-register the SIM card on the network.
- ✈️ Use Flight Mode: Turn it on for 10 seconds, then turn it off for forced search of the nearest tower.
- 📱 Check the SIM card: make sure it is not damaged and sits tightly in the tray, contacts should be clean.
It is also important to check whether the traffic saving feature is activated, which can artificially limit background data transfer. In the Data Use section, make sure that there are restrictions on background activity for critical applications, but not on main traffic. Traffic limiting sometimes blocks the update of widgets and messengers.
Setting up APN access points
One of the most effective methods is manual adjustment of APN access points. Operators often provide standard settings that are not always optimal for modern high-speed tariffs. Creating a new access point with the right parameters allows you to bypass some software limitations.
To enter the settings menu, go on the Settings path → SIM-maps and mobile networks → Choose yours. SIM → Names of access points (APN). Here you'll see a list of existing profiles. Don't edit them directly, you'd better create a new one by clicking on the plus in the top right corner of the screen.
In the menu that opens, you need to enter the data that corresponds to your operator. Usually, just copy the name and APN from the current profile, but change the protocol type. In the APN Protocol and APN Roaming Protocol field, select IPv4/IPv6, which will ensure compatibility with all modern servers.
⚠️ Attention: Don't change the fields MMSC and MMS proxy, if you actively use multimedia messages, otherwise the function MMS It may stop working properly.
After filling in all the fields, be sure to save the configuration and select the profile you created as active. If the Internet is gone after that, return the default settings with the reset button to the APN menu. The correct APN is the foundation of a stable connection.
☑️ Checking settings APN
Optimizing Wi-Fi Connection
If problems are observed mainly when connecting to a wireless network, it is worth paying attention to the settings of the Wi-Fi module in Redmi 9. The smartphone may choose the wrong frequency range or use outdated encryption standards, which reduces the real bandwidth of the channel.
Modern routers often combine the 2.4GHz and 5GHz bands under one name. However, Xiaomi sometimes prefers a longer-range but slower 2.4GHz band, even when you are near the router. Forced switching or splitting networks can give you speed gains.
| Parameter | Range 2.4 GHz | 5 GHz range |
|---|---|---|
| Speed. | Up to 150 Mbps | Up to 866 Mbps |
| Range. | Tall. | Medium |
| Wall penetration | Good. | Low. |
| Workload | Tall (many neighbors) | Low. |
Also in the Wi-Fi settings on the phone, you should turn off the Wi-Fi Assistant (or Wi-Fi Assistant), a feature designed to automatically switch to mobile internet when the signal is weak, but in practice it often causes constant breaks and long reconnections, and disabling this option stabilizes the connection.
For advanced users, a hidden Wi-Fi debugging mode is available. By entering the code ##6484## in the dial menu, you will be taken to the engineering menu, where you can check the signal quality and noise level. However, be careful: changing the parameters in the engineering menu without knowing can lead to the module inoperability.
Hidden codes for diagnosis
Resetting network settings
If software failures have accumulated over a long period of use, the best solution is to completely reset the network settings, which will return all Bluetooth, Wi-Fi and mobile Internet settings to factory values, removing possible configuration file conflicts.
Resets can be made via Settings menu → Connection & Sharing → Reset Wi-Fi, mobile networks and Bluetooth. The system will alert you that all saved passwords from Wi-Fi networks and Bluetooth pairs will be deleted. This is a necessary measure for a clean reconfiguration.
- 🔑 Remember or write down passwords from important Wi-Fi networks before resetting.
- 📵 Disable two-factor authentication on critical services if it is tied to SMS (during the procedure).
- 🔋 Make sure the battery is over 30% so that the phone doesn’t turn off during the process.
- 📲 After the reset, the user agreements of the telecom operators will need to be re-accepted.
Once rebooted, the phone will work like a new network connection, often solving problems when the Internet "seems to be there," but the pages are not loaded, and a clean network profile eliminates handwritten errors.
⚠️ Note: Network resets do not affect your personal files, photos or apps. Only Wi-Fi connection configurations and passwords are removed.
Using DNS to Accelerate
Replacement of the standard DNS-The faster and more reliable server is one of the most effective ways to speed up network response. Standard operator servers are often overloaded, which leads to a long wait for the page to load (TTFB).
MIUI (Xiaomi Redmi 9 shell) has a built-in private DNS feature. Go to Settings → Connection and Sharing → Private DNS. The default is Auto, but you can select Host Name of Private DNS Provider and enter the address.
The most popular and quickest options are servers from Google and Cloudflare. In the host name field, type dns.google or 1dot1dot1dot1.cloudflare-dns.com. This will allow encryption. DNS-requests and speed up their processing.
💡
Use Cloudflare's 1.1.1.1 or Google DNS from Play Market if manually entering the settings causes connection errors. These apps will automatically configure the optimal DNS.
The effect of changing the DNS is especially noticeable when visiting heavy media and in games. Ping can decrease by 10-20 ms, which is significant for online shooters. However, if the selected server is unavailable, the Internet may stop working altogether, so have the option to return the settings to automatic mode.
Impact of Updates and Background Processes
Remember that Android and MIUI are constantly updated. Sometimes new firmware may contain bugs that make the modem worse. Conversely, the lack of security updates can lead to vulnerabilities and instability.
Check for updates in the About Phone → MIUI menu. If an update is available, especially one marked “Improving System Stability,” it’s worth installing. However, if problems start immediately after the update, consider rolling back or waiting for a patch.
Also check which apps are consuming traffic in the background. Go to Settings → Data Use → Using Wi-Fi/Mobile Data. Apps that you don’t need right now but are downloading updates or syncing photos can choke the main stream.
⚠️ Note: Do not disable Google Play system services and system updates completely, otherwise some applications may stop working correctly or require a constant license recheck.
Background control saves not only traffic, but also battery power and processor computing resources for current tasks, and optimizing background processes is key to responsiveness when working on the network.
💡
Regularly checking system updates and monitoring background applications is a mandatory procedure to maintain high Internet speeds on Redmi 9.
Hardware constraints and external factors
The physical side of the matter cannot be ignored either: Xiaomi Redmi 9 has a module that supports 4G standards, but its antennas are located in the body specifically. Using dense cases with metal inserts or magnetic holders can shield the signal.
In addition, overheating of the device causes trotting (decreased performance) of all modules, including the radio module. If the phone is hot to the touch, the Internet speed can drop artificially to prevent damage to components.
In rare cases, the problem lies in the SIM-If your SIM is bigger than yours 5-7 It may not work properly in modern networks. 4G/LTE, If you're on a tariff, switching a SIM card from a new one to a new one from a carrier often works wonders.
To sum up, improving the internet on Redmi 9 is a set of measures: Start by checking your APN and DNS settings, then eliminate background downloads, and then consider hardware reasons. In most cases, software setup returns comfortable speed.