How to transfer an image from Xiaomi Redmi phone to a TV – all ways 2026

Broadcasting your smartphone screen to your big TV screen is one of the most popular features for Xiaomi owners. Whether you want to show photos from your vacation, run a mobile game on a 65-inch display or stream a movie from Redmi Note 12 to Xiaomi TV A2, there are many connectivity options, but not all of them are equally convenient: somewhere you need to buy an adapter, and somewhere there are enough built-in technologies like Miracast or Google Cast.

In this article, we will discuss all the current broadcast methods, taking into account the features of MIUI firmware and Xiaomi TVs (including Mi TV 4S, Redmi Smart TV models, etc.), you will learn how to avoid common errors like “failed to connect to the device”, why the image can slow down, and which method to choose for minimal delays. And also compare wired and wireless solutions on 5 key parameters: speed, quality, stability, cost and complexity of settings.

Spoiler: If you have a Xiaomi Redmi on MIUI 14+ and a TV in the same ecosystem, you're lucky that the manufacturer has made it as easy as possible. Owners of other brands will have to work a little harder, but there's a solution for them.

1. Wireless broadcast via Miracast (built-in MIUI function)

The easiest way for owners of Xiaomi Redmi and Xiaomi TV is to use Miracast technology, which is built into the MIUI firmware since version 12. It allows you to duplicate the screen of the smartphone on the TV without additional devices, but with some restrictions:

• 📱 It only works on devices with MIUI 12+ (Check in the settings → The phone).
• 📺 The TV should support Miracast (all Xiaomi models) TV After 2019, we support).
• 🔄 Maximum broadcast resolution — 1080p at 30 Hz (some models may have 60 Hz, but with artifacts).
• 🎮 Delay (input lag) - about 50-100 MS, which is critical for dynamic games.

To begin the broadcast:

1. On TV: open Settings → Connect and Sharing → Wireless Display (or Miracast).
2. On your smartphone: lower the notification curtain and click “Translation” → “Wireless Display” (or go to Settings → Connection and Sharing → Screen Broadcast).
3. Select your TV from the list of available devices. Confirm the connection on both devices.

⚠️ Note: If the TV is not listed, check if it is enabled with Visibility for All Devices in Miracast settings. Some Redmi models (e.g. Redmi 10) may require a phone restart to reset network settings.

Telephone and TV connected to the same Wi-Fi network|Miracast mode is on on the TV.|The phone's off. VPN|Distance between devices not more than 5 meters-->

2. Streaming via Google Cast (Chromecast) – for streaming content

If you don’t need to duplicate the entire screen, but only stream videos from apps (YouTube, Netflix, Movie Search), then Google Cast technology (aka Chromecast) will work better. It is more stable than Miracast, supports 4K resolution and has lower latency.

Important: Xiaomi TVs have built-in support for Google Cast, but the smartphone must have an app that can broadcast content (for example, YouTube or Google Photos).

1. Connect your phone and TV to the same Wi-Fi network (required!).
2. Open a supported app (e.g. YouTube).
3. Click on the broadcast icon (usually in the upper right corner) and select your Xiaomi TV.
4. The content will start playing on the TV, and the phone can be used for control (pause, volume).

Advantages of the method:

• 🎥 Support 4K HDR (If the TV and the content allow it).
• 🔋 Low power consumption (the phone does not transmit video, only commands).
• 🎮 You can continue to use your phone during the broadcast.

⚠️ Note: Some apps (e.g. Netflix) block streaming to non-certified devices. TV not appearing in the list, try using the official Chromecast or update the TV firmware.

Films and TV series|Games|Photos and video from the phone|Social media|Presentations and documents-->

3. Wired connection via HDMI (minimum delays)

If you want maximum quality and minimal latency (for example, for gaming or watching 4K@60fps video), then wired HDMI is the best choice.

• 📱 Xiaomi Redmi smartphone with support USB-C (All models after 2020).
• 🔌 adapter USB-C → HDMI (We recommend original from Xiaomi or certified Anker).
• 📺 HDMI-cable (usually complete with a TV).

Step-by-step:

1. Connect the adapter to the smartphone.
2. Connect the adapter to the TV through HDMI-cable (use the port) HDMI 2.0 or newer for 4K).
3. On the TV, select the appropriate signal source (HDMI 1/2/3).
4. On the smartphone may appear a request for permission to broadcast – confirm it.

Features of the method:

• ⚡ Delay less than 10ms (ideal for gaming).
• 🎬 Support 4K@60fps and HDR10 (if there is a supported cable).
• 🔋 Quick discharge of the phone battery (we recommend connecting charging).

💡

If HDMI-If you don't have the image, try restarting your phone with the adapter connected. Some Redmi models (e.g. Redmi Note 11) require you to turn on the mode "USB-Debugging in the developer settings.

4.Broadcast via Xiaomi Home (for the Mi ecosystem)

If you have Xiaomi smart devices (like Yeelight light bulbs or Mi Smart Speaker speakers), you can use the Mi Home app to stream.

• 📼 Showing photos in slideshow mode.
• 🎵 Music streaming to TV via Mi Smart Speaker.
• 📱 Managing TV as part of a smart home.

How to set up:

1. Install the Mi Home app and log in to your Xiaomi account.
2. Add TV to the ecosystem: Profile → Add device → TVs
3. In the "Scenarios" section, create a rule, for example: "When connecting your phone to Wi-Fi → turn on the broadcast on TV."

⚠️ Note: The feature doesn't work on all Redmi models, such as Redmi. 9A Mi Home may not be supported due to iron limitations.

5. Use of third-party applications (ApowerMirror, TeamViewer)

If the built-in methods don’t work (for example, on older Redmi models or TVs from other brands), you can use third-party applications.

• 🖥️ ApowerMirror – supports streaming from Android to Android TV, It requires the installation of server software on the PC.
• 🔄 TeamViewer QuickSupport – allows you to remotely control your phone from your TV (if you have Android installed on it) TV).
• 🎮 Steam Link – for streaming games from phone to big screen.

Cons of this approach:

• 🐢 Higher delay compared to HDMI.
• 💰 Some functions are paid (for example, 4K ApowerMirror).
• 🛠️ Requires settings on both devices.

Example of ApowerMirror configuration:

1. Download the app to your phone and TV (if you have Android TV on it).
2. Connect both devices to the same Wi-Fi network.
3. On your phone, select "Start broadcast" and scan QR-TV-screen.

6. Problem Solving: Why is the broadcast not working?

If the screen is not broadcasting or the connection is constantly breaking, check the following points:

A critical feature for owners of Redmi Note 8 Pro and older: these models can automatically turn off mobile Internet when broadcasting via Miracast. To avoid this, activate the "Always on mobile Internet" mode in the settings before connecting. SIM-map.

💡

If neither method works, upgrade your TV and phone firmware to the latest version. MIUI 14 and later fixes critical Miracast bugs for Redmi 10/11/12 models.

FAQ: Frequent questions about streaming from Redmi to Xiaomi TV