How to stream your iPhone screen to your Xiaomi TV via Bluetooth: The Complete Guide

Wireless streaming of content from an iPhone to a large screen on a Xiaomi TV is a convenient way to enjoy videos, games or presentations without unnecessary wires. Many users try to use Bluetooth for this, but face limitations: the standard protocol does not support video streaming. In this article, we will discuss why live streaming over Bluetooth is impossible, what alternative ways exist for models of Mi TV 4/5, Redmi Smart TV and newer ones, and how to avoid typical errors when connecting.

Let me warn you right away: if you’re looking for a way to mirror your iPhone on Xiaomi TV exclusively via Bluetooth (without Wi-Fi or adapters), there’s no such solution. However, there are workarounds that give the same result at minimal cost. Next, a detailed review of each method, their pros and cons, and instructions for different versions of iOS and MIUI TV firmware.

To avoid wasting time on useless attempts, first check the compatibility of your devices. for example, AirPlay only works on Xiaomi TVs with a high-end phone. MIUI TV 3.0+ Apple support TV-Apps (see the list of models in the table below). If your TV is not included in this list, consider options with the following: HDMI-Adapters or consoles – they are often cheaper and more reliable than buying a new TV.

Why Bluetooth is not suitable for streaming video from iPhone to Xiaomi TV

Bluetooth is technically a protocol for short-distance data, but it's not originally designed for video streaming. Here are the key limitations:

🔹 bandwidth: The maximum speed of Bluetooth 5.0 is up to 2 Mbps, whereas for video broadcasting as a video 1080p At least 5-10 Mbps is required. Even the compressed stream will slow down or “decay” into artifacts.

🔹 Latency: When transmitting over Bluetooth, the delay reaches 100-300 ms, making it impossible to watch movies or games (picture and sound will not be synchronized).

🔹 iOS restrictions: Apple blocks Bluetooth video streaming for battery safety and optimization purposes.The only exception is audio transmission (e.g., wireless headphones or speakers).

⚠️ Warning: If you see apps on the App Store promising “Bluetooth Bluetooth broadcast to Xiaomi” TV», It's a fraud. It either requires payment for a function that's not working, or it installs malware.

However, Bluetooth can be used to transmit audio from an iPhone to a Xiaomi TV if the TV supports an A2DP profile.

1. Open the Settings. → Bluetooth on TV.
2. Activate the device search mode.
3. On iPhone, go to Settings → Bluetooth and select your Xiaomi TV from the list.
4. Confirm the conjugation (if necessary, enter the PIN-code, usually 0000 or 1234).

Method 1: AirPlay is the official method for new Xiaomi TV models

AirPlay is a protocol from Apple that allows you to broadcast the iPhone screen to compatible devices over Wi-Fi. Many Xiaomi TVs (starting with the Mi TV 4S 2020 and later) support this feature out of the box.

📌 Requirements:

• 📱 iPhone with iOS 12.3+ (Errors are possible on older versions).
• 📺 Xiaomi TV with MIUI TV 3.0+ Apple support TV-applications.
• 🌐 Both devices must be connected to the same Wi-Fi network (5GHz recommended for stability).

🔧 Step-by-step instruction:

1. On the Xiaomi TV remote, click the Home button, then go to Settings → Devices and Connections → AirPlay.
2. Enable AirPlay and set access mode (recommended for all or devices on this network).
3. On your iPhone, swipe down from the top right corner of the screen to open Control Point.
4. Click Screen Duplication (or Screen Mirroring), then select your Xiaomi TV from the list.
5. Confirm the connection on the TV (coding may be required).

⚡ Advantages of the method:

• 🎮 Minimum latency (up to 50 ms) suitable for gaming.
• 🔊 Both video and sound are transmitted without additional settings.
• 📶 Stable operation with a good Wi-Fi signal.

⚠️ Typical problems and solutions:

• 🔴 TV not appearing on AirPlay list: Check that AirPlay is on TV and both devices are on the same network.
• 🟡 Video slows down: Switch to 5GHz in router settings or reduce broadcast resolution in AirPlay Settings on TV.
• 🟢 No Sound: On your iPhone, check that the Control Point has the correct sound source (not Bluetooth headphones).

Both devices in the same Wi-Fi network|AirPlay is on TV.|On the iPhone included Wi-Fi and Bluetooth|Updated iOS firmware and MIUI TV-->

Method 2: Miracast – an alternative to older Xiaomi TV models

If your Xiaomi TV doesn’t support AirPlay, but you have Miracast, you can try this method. However, it has a caveat: Apple doesn’t support Miracast at the system level, so you’ll need a third-party app.

📌 Requirements:

• 📺 Xiaomi TV with Miracast support (check Settings menu) → Screen. → Wireless display).
• 📱 iPhone with iOS 11+ and an installed Miracast application (e.g. Screen Mirroring for Miracast or ApowerMirror).
• 🌐 Wi-Fi Direct or shared Wi-Fi network (depending on the TV model).

🔧 Instructions:

1. On the TV, turn on Miracast: Settings → System → Wireless display.
2. Install the Miracast app on your iPhone (see links at the end of the article).
3. Launch the app and select your Xiaomi TV from the list of available devices.
4. Confirm the connection on the TV (may be required) PIN-code).

⚠️ Miracast's restrictions on iPhone:

• 🔴 Delays up to 200-500 ms (not suitable for dynamic games).
• 🟡 Possible image artifacts with a weak signal.
• 🟢 Some apps (such as Netflix or YouTube) may block streaming due to the fact that they are not available. DRM-defense.

Important: Miracast apps on iOS often require a subscription (from 300+) ₽/Before paying, check out the free trial – some features may be limited.

💡

If Miracast is not working, try turning it off. VPN on iPhone – some applications block the broadcast when active VPN-linkage.

Method 3: HDMI-Adapters – a universal solution without Wi-Fi

If wireless methods are not suitable (for example, due to weak Wi-Fi or an old TV model), HDMI-The adapter will be a reliable alternative. It is the only way to broadcast the iPhone screen on Xiaomi. TV with minimum delay and maximum quality (up to the 4K@60fps).

🛒 Which adapters are suitable:

🔧 How to connect:

1. Connect the adapter to the iPhone.
2. Connect the adapter to Xiaomi TV through HDMI-cable (use the port) HDMI 2.0 4K).
3. On the TV, select the appropriate signal source (HDMI 1/2/3).
4. On the iPhone, confirm your trust in the device (if you receive a request).

✅ Adapters' advantages:

• 🎬 No delays and loss of quality.
• 🔋 Does not drain the battery of the iPhone (if the adapter is powered).
• 🛡️ It works on all Xiaomi models. TV, even without smart features.

❌ Cons:

• 🔌 Physical connection required (inconvenient for continuous use).
• 💰 More expensive than wireless solutions (but cheaper than buying a new TV).

Method 4: Configures (Apple TV, Xiaomi Mi Box) - for advanced features

If you stream content from your iPhone to your TV often, it makes sense to consider buying a media set-top box, which will not only solve the broadcast problem, but also add new features (like access to Apple TV+ or Google Play Movies).

📺 Comparison of consoles:

🔧 How to set up a broadcast through Apple TV:

💡 Advice for Xiaomi Mi Box:

If you have a console from Xiaomi, install the ApowerMirror or LocalCast app from Google Play.They allow you to stream your iPhone screen over a local network, but with a delay of ~300 ms.

💡

Apple TV is the most reliable solution for iPhone owners, but if the budget is limited, Xiaomi Mi Box S + Miracast app will give a similar result for less money.

Problem Solving: What to Do When the Broadcast is Not Working

Even when you set it up properly, you can get errors, and here are the most common problems and ways to fix them:

🔴 TV not visible on the list of devices:

• 🔄 Reboot iPhone and Xiaomi TV.
• 📶 Make sure both devices are connected to the same Wi-Fi network (not the guest network!).
• 🔧 Update the TV firmware (Settings) → On TV. → Update of the PO).

🟡 Video slows or tears:

• 📶 Switch the router to 5GHz (less interference).
• 🔌 Connect iPhone to charging – with low battery levels, iOS limits performance.
• 🎮 Reduce the resolution of the broadcast in the settings of AirPlay on TV.

🟢 No sound when broadcasting:

• 🔊 On iPhone, check that the correct sound source is selected at the Control Point.
• 🔕 Turn off Bluetooth headphones or speakers.
• 🔄 Reconnect to the TV.

🔴 Miracast app requires payment:

• 🆓 Try the free versions: Screen Mirroring for Samsung TV (It also works with Xiaomi, or TV Cast for Xiaomi.
• 🛡️ Do not enter card details in unknown applications – many of them are fraudulent.

⚠️ Note: If after the update MIUI TV AirPlay is missing, reset your network settings on your TV (Settings) → Network → Network resetting. This often solves the compatibility problem.

FAQ: Frequent questions about streaming from iPhone to Xiaomi TV