How to properly connect Honor headphones with Xiaomi phone: 5 proven ways

Matching Honor headphones with Xiaomi phones only seems like a simple task. In practice, users face connection errors, communication interruptions or the inability to find the device in the list of available ones. Qualcomm/Broadcom and even versions of the operating system MIUI. Honor Magic Ears headphones with Kirin chip A1 It may be in conflict with Xiaomi. 12T Pro on Snapdragon 8+ Gen 1 because of different codec standards (LC3 vs AAC).

In this article, we will not just give the instruction “turn on Bluetooth and click connect”, but will analyze all possible scenarios: from basic pairing to solving rare bugs, when the phone “sees”, but does not connect to the headphones. You will also learn how to check model compatibility, update the headphone firmware, and even use alternative protocols like LE Audio (if your Xiaomi supports it) is half the success of getting ready.

If you have already tried to connect and received an error such as “Device failed to hide” or “Connection interrupted”, skip the first section and go straight to solving the problems.

1.Preparation: What to do before connecting

Before you press the pairing button, make sure both devices are ready to communicate. 70% of failures occur due to basic omissions: discharged headphones, outdated phone firmware or power saving mode enabled, which blocks background Bluetooth processes.

Start by checking the charge of Honor headphones.Most models (like the Honor Choice) X1 or Magic3 Pro) have a charge indicator on the case or voice alert. If the indicator flashes red, connect the headphones to charge for 10-15 minutes. Minimum charge level for stable pairing: 20%.

Next, update the firmware of the Xiaomi phone. Go to Settings → The phone. → Update the system and install the latest patches, especially critical for models on the MIUI 13/14, where were the bugs with Bluetooth support 5.2+. If there are no updates, check the version. MIUI In Settings → The phone. → Version. MIUI — It should be no lower. 12.5 (For stable work with Honor).

Finally, disable all extraneous Bluetooth devices connected to your phone (fitness bracelets, speakers, keyboards) that can interfere with pairing. VPN Power saving modes – they sometimes block scanning of new devices.

Headphone charge ≥20%|Updated firmware Xiaomi (MIUI 12.5+)|Other Bluetooth devices disabled|Power saving mode is off|Deactivated VPN (if used)-->

2. Basic pairing via Bluetooth: step-by-step instructions

The most common way is to connect via standard Bluetooth protocol, which works for all Honor models. AM61 magic V2) Xiaomi phones (starting with the Redmi Note 8 Pro) follow the instructions carefully, as the order of action is important.

Step 1. Turn Honor headphones into pairing mode:

• 🔋 For Honor. Choice/Magic Ears: Press the power button on 5–7 seconds until the indicator starts flashing blue and white.
• 🎧 For Honor FlyPods: Open the case cover and press the touch panel for 3 seconds (sound beeping).
• 📦 For Honor. AM61: Hold the button on the back until you hear "Pairing mode".

Step 2: Activate Bluetooth on Xiaomi:

1. Open Settings → Bluetooth.
2. Move the slider to the on position.
3. Click Device Search (or Add a new device).

Step 3. Find the headphones in the list and connect:

• 🔍 The name of your model (e.g. Honor Magic Ears-XXX) will appear in the list.
• ✅ Confirm the pairing on the phone (if necessary).
• 🎵 Wait for the sound in your headphones (usually "Connected" or a tune).

If the headphones don't appear on the list, go to the problem solving section. If the connection is successful but the sound is interrupted, check the stability settings.

💡

On some Xiaomi models, for example, POCO F4) There's a bug: Bluetooth won't find a device if Developer Mode is enabled. Turn it off in Settings. → Additionally. → For developers.

3. Quick connection through NFC (if maintained)

Honor Magic Ears 3, FlyPods Pro and some flagship Xiaomi smartphones (e.g. Xiaomi 13 Ultra or Mix Fold 3) support NFC-This method is 3 times faster than the standard and eliminates device search errors.

How to connect through NFC:

1. 📱 Turn it on. NFC on the phone: Settings → Connections → NFC (or through the notification panel).
2. 🎧 Get your headphones out of the case (if that's it) TWS) or turn them on.
3. 🔗 Apply the back cover of the headphones (or case) to NFC-phone chip (usually located at the top of the back panel).
4. ✅ Confirm the pairing on the phone screen.

Advantages of the method:

• ⚡ Instant connection (2-3 seconds vs. 20-30 seconds via Bluetooth).
• 🔒 Automatic codec configuration (optimal selection is selected: AAC or).
• 🔄 Easy reconnection - just put the headphones back on the phone.

Limitations:

• ❌ It only works with supported models (check the specifications of your devices).
• ⚠️ On Xiaomi with custom firmware (for example, Pixel Experience) NFC It may not recognize Honor devices.

4.Pairing through the proprietary Honor application (alternative method)

If the standard methods didn’t work, try using the official Honor app. AI Life (formerly Huawei) AI It allows you to connect Honor headphones even to incompatible devices, bypassing the limitations of the Bluetooth stack.

Instructions:

1. 📥 Download Honor AI Life from AppGallery or APKMirror (if not Google Play).
2. 🔧 Open the app and allow Bluetooth and location access (required for scanning devices).
3. 🔍 Click Add Add the device → Headphones and choose your Honor model.
4. 🔗 Follow the instructions on the screen (usually you need to confirm the connection on the headphones with a button).

Advantages of the method:

• 🛠️ Bypasses bugs MIUI Bluetooth.
• 🔄 Allows you to update the firmware headphones directly from the phone.
• 🎛️ Provides access to advanced settings (for example, adjustment) ANC codec-change).

Disadvantages:

• ⚠️ The app may not work on Xiaomi with Google Mobile Services blocked (e.g., Chinese versions).
• 📴 Requires constant background access, which consumes battery power.

Through standard Bluetooth.|Through NFC|Through a branded app|In other ways.-->

5. Problem Solving: Headphones don't plug in or turn off

If the pairing fails, use this table for diagnosis:

If the problem persists, perform a hard reset of headphones:

1. Put the headphones in the case (if that's it). TWS).
2. Open the case cover and press the reset button (usually located on the back of the case) for 15 seconds until the indicator flashes red.
3. Close the lid, wait 30 seconds and try to reconnect.

💡

If the Honor headphones were previously paired with the device on EMUI (Huawei, they can block the connection to the MIUI. In this case, the reset to the factory settings is mandatory!

For Xiaomi models on the Snapdragon 8 Gen 2 (for example, Xiaomi 13 Pro) there is a specific bug: Honor headphones connect, but the sound goes only to one channel.

1. Go to Settings. → Sound. → Bluetooth sound quality.
2. Select Compatibility Priority instead of Quality Priority.
3. Reconnect the headphones.

💡

Xiaomi with HyperOS (new models 2026) has a hidden setting for a forced connection. Enter the phone app code ##284##, then select Bluetooth Test. → Force Pairing and enter MAC-Headphone address (printed on the case).

6.How to ensure stable connection without breaks

Even if the pairing is successful, Honor headphones can periodically turn off or interfere. MIUI And the hardware limitations of the chips. Here's how to minimize the problems:

Optimizing the phone settings:

• 📵 Turn off Adaptive Bluetooth in Settings → Bluetooth → Additionally (this will reduce automatic codec switching).
• 🔋 Add the Honor app AI Life (if you use) in battery optimization exceptions: Settings → Battery → Optimizing the battery → All applications.
• 🎛️ Turn on Absolute Volume in Developer Settings (this synchronizes volume levels between phone and headphones).

Headphone settings:

• 🎧 For models with ANC (For example, Honor Magic Ears 3) turn off noise cancellation in noisy places – this reduces the load on Bluetooth.
• 🔊 Set the bitrate at 256-320 kbit / s (in the Honor application) AI Life), if interference is heard.
• 🔄 Regularly (every 2-3 months) update the firmware of headphones through the proprietary application.

Critical information: Honor headphones with Kirin chip A1 (Like Magic Ears. 2) It is a conflict with Xiaomi on Snapdragon 888/8 Gen 1 Due to different protocol implementations LE Audio. In this case, force the codec to select. SBC Bluetooth is the only stable option.

If the breaks occur when you listen to music through Spotify or YouTube Music, the problem may be in the app.

• Clear the app cache: Settings → Annexes → [Title of the annex] → Warehouse → Clear the cache.
• Turn off audio processing in the application settings (for example, volume normalization in Spotify).

7. Advanced methods: LE Audio, Dual Audio and custom firmware

If you own a flagship device (Xiaomi 14 Ultra) + Honor Magic V2), You can use advanced features to improve sound and stability.

LE Audio (LC3):

• 🎵 Supported on Xiaomi with Snapdragon 8 Gen 2+ Honor headphones with Kirin chip A2.
• 🔧 Included in the Developer Settings → Bluetooth → Turn on LE Audio.
• ⚡ Benefits: Less power consumption, better synchronization of sound with video.

Dual Audio (Simultaneous connection to two devices):

• 📱 Works on MIUI 14+ Honor headphones with Multipoint support (for example, FlyPods Pro).
• 🔗 To turn on: Connect the headphones to the first device, then activate Multipoint mode in the Honor app AI Life and connect the second device.

Castom firmware (for experienced users):

• 🛠️ On Xiaomi with unlocked bootloader, you can install firmware with a modified Bluetooth stack (for example, crDroid or Pixel Experience).
• ⚠️ Risks: loss of warranty, possible bugs with microphone in headphones.
• 📌 Instructions: run through TWRP Firmware with Bluetooth Stack Patch (search for the XDA Developers).

💡

Xiaomi with HyperOS has a hidden Bluetooth FastConnect feature. To activate it, type setprop persist.bluetooth.fastconnect true into the engineering menu (#4636##) and reboot your phone. This will speed up the reconnection of the headphones.

Frequent questions