Change of change IP-Addresses on a smartphone can be required for a variety of reasons, from solving connection problems to the router to providing basic anonymity on the network. Owners of Xiaomi, Redmi and Poco devices often face the need to change the digital ID to bypass local restrictions of the provider or fix errors. DNS. In the operating system MIUI and the new HyperOS, this process is implemented quite flexibly, allowing you to manage network parameters without installing third-party software.
It is worth noting that there is a difference between changing your local IP (within your home network) and global IP (your Internet address). While the former is available to everyone through Wi-Fi settings, the latter requires more complex manipulation or the use of special tunnels. In this article, we will discuss both options, focusing on the standard Android shell tools adapted by engineers of the Chinese company.
Before you make any changes, it's important to realize that misconfiguring a static address can lead to loss of access to the Internet. However, don't panic: the system has built-in security mechanisms, and in the event of a conflict of addresses, the device will simply stop transmitting data, but will not fail.
Difference Between Static and Dynamic IP on Android
By default, any smartphone that connects to an access point requests an address automatically, a mode called DHCP (Dynamic Host Configuration Protocol), which the router itself allocates to the device a free number from the pool, and after a certain time can give another one, which is convenient for most users, because it requires no configuration and ensures that there are no conflicts on the network.
However, there are times when automatic distribution is not working correctly or you need a fixed address to set up port port port port port porting, print or access to a media server. This is where manual mode comes to the rescue. By switching to Static IP, you prescribe all the numbers yourself, which gives you full control over the network interface of your Xiaomi.
It is important to note that changing your local IP will not hide your location from websites on the Internet. Your ISP will still see your real output address. Changes to your external ID will require other methods, which will be discussed below. For now, we will focus on local settings that often help solve problems with the "hang" of the connection.
How to Change Local IP Through Wi-Fi Settings
The easiest and safest way to change the address of the device on the local network is to use the standard menu of MIUI settings. This method does not require root rights and works on all current models, from the budget series Redmi Note to the flagship Xiaomi 14.
To start, you need to get into the extended menu of the current network. The standard path is usually hidden in the submenus of the connection details. Find the desired network in the list of available and click on the arrow or gear next to the name. In the window that opens, find the section responsible for IP parameters, which is the default position "DHCP".
☑️ Algorithm of shifting IP
After switching, the fields will become active for editing, and you will need to enter a new address, gateway, and DNS. Be careful: if you specify an address that is already occupied by another device (for example, a TV or a laptop), there will be a conflict, and one of the devices will shut down, so you better choose numbers at the end of the range that are less commonly used by the router for distribution.
⚠️ Note: When manually entering the gateway, make sure it matches the address of your access point. Usually it is 192.168.1.1 or 192.168.0.1. A single digit error will completely terminate the connection to the Internet.
Step-by-step: manually adjusting a static address
So let's take a look at the data entry process in detail, and when you switch to static, the system will ask you to fill in a few fields"IP-The "address" is what we change, leaving the first three groups of digits unchanged (e.g. 192.168.1), and the last one replaced by any 2 to 254, excluding those that are already occupied.
Next comes the Gateway, which should be your router's address, and most of the time, the system automatically substitutes it when you switch mode, but if the field is empty, type in the router's address. The network prefix is usually 24, which is 255.255.255.0. This is the standard for home networks.
DNS is the default server for your ISP or router, and Google’s public DNS (8.8.8.8) or Cloudflare (1.1.1.1) can be used to speed up and improve security, which often helps if pages load slowly or don’t open at all.
Example of correct settings:
IP- Address: 192.168.1.158
Gateway: 192.168.1.1
Length of prefix: 24
DNS 1: 8.8.8.8
DNS 2: 8.8.4.4Once you have entered all the data, make sure to click the Save button. The smartphone reconnects to the network. If done correctly, the Wi-Fi icon will appear without warning, and the Internet will work. If the connection does not establish, the system will give an error. IP-Address or "Authentication Error".
What to do if the IP is not suitable?
Changing mobile Internet IP (3G/4G/5G)
The situation is different with a mobile operator. You can't manually prescribe static IP for a cellular network in Xiaomi's standard settings, because the address is completely controlled by the carrier. Your phone gets a dynamic address every time you register on the network. However, there are ways to "update" this address.
The most effective method is to switch on the flight mode for a short time, which causes the phone modem to completely reconnect to the cell tower. When the network registers again, it often (but not always) assigns a new external one. IP-This is not a method that works for all operators, because some people link the address to a particular session for a long time.
To implement this method, perform the following actions:
- 📶 Lower the notification curtain and activate "Flight Mode" (aircraft icon).
- ⏳ Wait. 10-15 seconds until the icon goes off. 4G/LTE.
- ✈️ Turn off flight mode and wait for the network to appear.
- 🌐 Check yours. IP specialized site.
If a simple reset of the communication module didn't work, you can try a more radical method, resetting the network settings, which would remove all stored APN access points, passwords from Wi-Fi and Bluetooth pairs, but return network settings to factory values, often when the operator's access point settings are lost.
⚠️ Note: Before resetting your network settings, make sure you remember passwords from your Wi-Fi networks, as they will have to be re-entered. Also check if important pairs of Bluetooth devices are saved that you will have to re-pair.
Using proxy and VPN to change external IP
If your goal is to hide the real thing IP-If you change your address from sites and services to another country or city, you don't get local Wi-Fi settings. You need traffic tunneling tools. Xiaomi has a built-in private feature. DNS, but for a full shift IP better VPN proxy.
Unlike computers, on Android, VPN applications run at the system level, redirecting all traffic through a remote server, allowing you to unlock content and hide location. Google Play or GetApps (Xiaomi store) have many such utilities.
You can also prescribe Wi-Fi settings. HTTP-Proxy: This is a more narrowly configured method that only works for browser traffic or certain applications that support system proxies.
- 🔗 Go to the settings of an active Wi-Fi network.
- ⚙️ Find the item "Proxy" (usually worth "No").
- 📝 Select Manual and enter the address and port of the proxy server.
- ✅ Save the changes.
💡
Use HTTPS for proxy if possible, and this will provide encryption between your phone and the proxy server, which is especially important when connecting Wi-Fi to cafes or airports.
Comparison of methods of changing IP-address
To make it easier for you to choose the right way, we have prepared a comparison table that will help you assess the complexity of implementation and the effectiveness of each method depending on your goals.
| Method | Difficulty | Changing the external IP | Demands a P. |
|---|---|---|---|
| Static IP (Wi-Fi) | Low. | No (local only) | No. |
| Flight mode | Very low. | Occasionally (depends on operator) | No. |
| Resetting network settings | Medium | Yes (on reconnection) | No. |
| VPN-applications | Low. | Yes (guaranteed) | Yes. |
| Set up a proxy | Tall. | Partially (browser/applications only) | No (needs server) |
As you can see from the table, for simple tasks of stabilizing a connection, manually entering a static address is enough. If anonymity is required, you can not do without third-party solutions. Xiaomi’s built-in tools are great at managing a local network, but are not designed to mask traffic on the WAN.
💡
To change your digital passport on the Internet (external) IP) setting up a router or phone is not enough – you need to access through an intermediate server (VPN/Proxy).
Possible problems and solutions
Users can encounter a number of errors during the setup process, the most common being "Save but no Internet access." This means that the phone has connected to the router but cannot access the external network. Check whether the gateway and DNS are entered correctly. A single character error makes the address unworkable.
Another problem is that there's a permanent disconnect, and this can happen if the static IP you choose falls within the range that the router actively distributes to other devices via DHCP. This results in an address conflict. Solution: change the last digit of the address to another, like 200 or higher.
Sometimes, when you change your settings, some applications, especially those that are geolocated or secure (banks), can stop working if you find non-standard network settings or proxy, and then you just need to return your IP settings to DHCP to restore full functionality.
⚠️ Note: If you use a corporate network or a network of an educational institution, manual change IP This can be interpreted by security as an attempt to gain unauthorized access.