How to distribute the Internet from Xiaomi on iPhone: 3 working ways + fixing

Distributing the Internet from Xiaomi smartphone to iPhone is a task that users face when you urgently need to connect your iPhone to the network, and there is no router nearby. While it may seem simple, the process can be complicated by the specifics of Wi-Fi protocols on devices of different brands, carrier restrictions or security settings. In this article, we will discuss all the current ways of distributing the Internet, including hidden features. MIUI, Common errors that interfere with stable connection.

It's important to understand that the iPhone has very stringent network requirements, such as that it can refuse to connect to an access point with an outdated encryption type or a non-standard frequency range. MIUI 14/15 iOS 17/18, Therefore, the instructions are relevant to 2026 If you are using a device older than the year 2020 In the year of release, some items may require adaptation – we will also mention this.

Before you start, check two key points: your Xiaomi should be enabled mobile Internet (not only Wi-Fi!), and iPhone – disabled automatic connection to other networks in Settings. → Wi-Fi. This will eliminate conflicts when setting up.

1. Standard method: access point via settings menu

The most obvious method is to use the built-in modem function in MIUI. It works on all Xiaomi smartphones regardless of the model, but can be blocked by the operator (for example, Tele2 or Yota sometimes need to connect an additional option:

1. Open Settings on Xiaomi and go to the SIM Cards and Mobile Networks section.
2. Choose an active one SIM-card (if there are two) and tap on the access point and modem.
3. Activate the Wi-Fi Access Point slider and wait for the launch notification to appear.
4. On iPhone, open Settings → Wi-Fi, find the network with your Xiaomi name (like Redmi Note 12 Pro) and connect by entering a password.

By default. MIUI It generates a complex password of 8 characters, but it can be changed:

• 🔐 In the Wi-Fi Access Point menu, click Access Point Settings.
• 📝 Enter a new password in the field (we recommend using at least 10 characters with numbers and letters).
• 🔄 In the Security section, select WPA2-PSK — It is the only protocol that works with the iPhone.

Xiaomi smartphone is connected to the mobile Internet (icon) 4G/5G status-line)

On the iPhone disabled mode "In the plane"

Xiaomi has enabled data transfer for SIM-map

Password from the access point copied or recorded-->

If the iPhone doesn't connect, try rebooting the hotspot: turn it off and turn it back on in Xiaomi's settings. Also check if the connection is blocking the firewall or VPN on iPhone – temporarily turn them off in Settings → VPN and control.

MTS

Beeline

MegaFon

Tele2.

iota

Other-->

Alternative method: USB-modem (if Wi-Fi is not working)

If the Wi-Fi distribution is constantly cut off or the iPhone persistently does not see the network, you can use the USB-This method is less convenient (requires cable), but it provides a more stable speed and lower battery consumption Xiaomi!).

Instructions for MIUI 14/15:

1. Connect Xiaomi to iPhone via USB-C/Lightning cable (may require an adapter).
2. On Xiaomi, select File Transfer Mode (not Charging) in the notification.
3. Go to Settings → SIM cards and mobile networks → Access Point and modem.
4. Activate the slider USB-modem.
5. On the iPhone will appear a notification about the new network connection – confirm trust in the device.

Note that some iPhone models (such as the iPhone 14 Pro) may have a "Cell phone failed" error.

• 🔌 Try another cable (the original Apple cable usually works better).
• 🔄 Reboot both devices.
• 📱 On Xiaomi in the Developer (Settings) → The phone. → Version. MIUI — Tap it 7 times) turn on the debugging by USB.

Critical nuance: USB-The modem consumes significantly less battery power than the Wi-Fi point, but can limit speeds to a high. 10-15 Mbps due to protocol specifics USB 2.0 on older iPhones (up to iPhone) 12).

Modem mode via Bluetooth (economical option)

If you want to share the Internet on an iPhone with minimal charge consumption of both devices, a Bluetooth modem will do. 3-5 Mbps), but that's enough for instant messengers or mail, and the main advantage is low power consumption and no connection problems that are typical of Wi-Fi.

How to set up:

1. On Xiaomi, turn on Bluetooth in the notification curtain or through Settings → Connections and sharing → Bluetooth.
2. On your iPhone, also activate Bluetooth and find your Xiaomi device list (model name will automatically appear).
3. Confirm the pairing on both devices (code must match).
4. Back to Settings → SIM cards and mobile networks → Access Point and Modem on Xiaomi and Enable Bluetooth Modem.

After that, the iPhone will display a Bluetooth icon with a data indicator in the status bar, if the connection is interrupted:

• 🔳 Make sure the distance between the devices is less than 10 meters (walls and obstacles reduce the radius).
• 🔋 Check the charge level on Xiaomi – at a charge below 15%, the Bluetooth modem can turn off.
• 🔄 Reconnect devices, having previously "forgot" Xiaomi in the Bluetooth settings on the iPhone.

💡

If the speed over Bluetooth is too low, try disabling the iPhone background app update in Settings. → Mainstream → Background content updates.This will free up the channel for priority traffic.

4. Table of comparison of ways of distribution of the Internet

And you can see from the table that Wi-Fi is the fastest, but the most voracious method. If you have to give away the Internet for a few hours (for example, on a trip), you better use it. USB Also note that some operators (for example, MegaFon) may limit the speed when distributing the Internet, in which case a change in tariff or use will help. VPN Xiaomi.

5. Typical errors and their solutions

Even if you set up the connection correctly, it may not work because of hidden problems, and we've collected some of the most common errors and ways to fix them:

⚠️ Note: If the message “Impossible to join the network” appears on your iPhone, check if your Xiaomi is using a non-standard Wi-Fi channel (for example, for example, if you are using a non-standard Wi-Fi channel, 165 MHz in the range 5 GHz. iPhones don't support these channels -- switch to this channel. 2.4 GHz or standard 5 GHz (channels) 36-48).

Error 1: iPhone connects to the hotspot, but the internet doesn’t work.

• 🌐 Check if the data transmission is enabled for SIM-Maps on Xiaomi (Settings) → SIM cards. → Transfer of data).
• 🔄 Reboot both devices.
• 📶 Make sure that Xiaomi has network coverage (Icon) 4G/5G active).

Mistake 2: The access point on Xiaomi is permanently shut down.

• 🔋 Check the charge level - at a discharge below 20% MIUI can force the modem to shut down.
• 🛠️ In the developer settings (Settings) → The phone. → Version. MIUI — Tap 7 times) turn off the automatic access point.
• 📴 Check if your operator is blocking the distribution (call support to activate the option "Modem / Access Point").

Error 3: The “wrong password” message appears on the iPhone, even though you type it correctly.

• 🔑 Reset the access point password on Xiaomi (remove all special characters, use only Latin and numbers).
• 📱 On iPhone, “forget” the network (Settings) → Wi-Fi → Click on the "i" next to the network → Forget this network and connect again.
• 🔄 Switch the security type to Xiaomi with WPA3 on WPA2-PSK.

💡

If none of these methods work, check to see if your plan blocks the Internet distribution. Some operators (such as Tele2) require an additional option to connect to the Modem, even for unlimited rates.

6. Optimization of connection speed and stability

Users often complain about slow speeds or interruptions when distributing the Internet, and here's how to improve the quality of communication:

For Wi-Fi access point:

• 📶 Switch to 5GHz (if your iPhone supports it) – it’s less loaded but has a smaller range.
• 🔄 In the settings of the access point (Settings) → Wi-Fi hotspot → Set up the frequency band: 20 MHz – this will reduce interference.
• 📵 Disable the Smart Wi-Fi Switching feature on Xiaomi (Settings) → Wi-Fi → In addition) to avoid conflicts.

For USB-modem:

• 🔌 Use a support cable USB 3.0 (usually marked in blue connector color – this will increase the speed to 30-40 Mbit/s.
• 🖥️ On Xiaomi in the developer settings, turn on Debugging by USB and Data transmission by USB.

For Bluetooth modem:

• 📱 On iPhone, turn off other Bluetooth devices (earphones, smartwatches) to free up the channel.
• 🔄 In Xiaomi Settings, select Bluetooth 5.0 (if available) for a more stable connection.

If the speed is low, check if the operator is limiting it.

1. Connect Xiaomi directly to your laptop via USB Check the speed on the Speedtest.
2. Compare the result with the speed when handing out on the iPhone.
3. If the difference is significant (over 30%), the problem is with the settings of Xiaomi or iPhone. If the speed is equally low, the operator is to blame.

7 Hidden MIUI functions for Internet distribution

MIUI It contains several hidden options that can make it easier to share the Internet or improve its quality:

1. Forced range 5 GHz

If your iPhone supports 5 GHz, but Xiaomi stubbornly distributes the network only 2.4 GHz, you can force the desired range:

1. Activate Developer Mode (7 taps according to MIUI version in Settings → About Phone).
2. Go to Settings → Additional → For developers.
3. Find Forced to Use 5GHz Wi-Fi and turn it on.
4. Reset the access point.

2. Disconnecting the speed limit

Some operators (like Beeline) artificially limit the speed of the Internet distribution, to get around this:

• 📲 Install the NetGuard app on Xiaomi (root rights required) and block network access for the operator’s application (for example, My Beeline).
• 🔄 Or use it. VPN Xiaomi (e.g. ProtonVPN) – this sometimes resets the restrictions.

3.Amendment MTU stability

If the connection is broken every time 5-10 The problem may be incorrect in the minutes. MTU (maximum package size, to change it:

1. Connect Xiaomi to your PC via ADB (The instruction for setting is on XDA Developers).
2. Adb shell settings put global settings tether_dun_required 0
3. Reset the device.

That'll turn off the check. DUN (Dial-Up Networking, which sometimes conflicts with iOS.

8. Security in the distribution of the Internet

Sharing the Internet with Xiaomi opens up potential vulnerabilities for attackers. Follow these rules to protect your data:

1. Password setting

• 🔐 Use a password at least as long as 12 mixed case symbols, numbers and special characters (e.g. Xiaomi)@iPhone2026!).
• 🔄 Change your password once a month if you are giving out the internet frequently in public places.

2. Limitation of connections

By default. MIUI It allows you to connect up to 10 devices at a time to reduce the risk of unauthorized access:

1. Go to Settings → Wi-Fi Access Point → Adjust the access point.
2. Install Max. connected devices: 1 (if you only give out on iPhone).

3. Disconnection of distribution in case of inaction

To save charge and prevent the connection of foreign devices:

• ⏱️ Enable the option to Disable the Access Point in case of inactivity (available in Settings) → Wi-Fi hotspot → Additionally).
• ⚡ Set the timer on 5-10 Minutes – enough for temporary use.

⚠️ Warning: Never share the Internet over an open network (without a password) in public places. Attackers can intercept your traffic, including logins from social networks and banking applications. Even if you urgently need to connect your iPhone, always use a strong password.

FAQ: Frequent questions