How to give away the Internet from the phone Xiaomi: full instructions for all models

Xiaomi smartphones (including the Redmi line, POCO and Mi) allow you to distribute mobile Internet to other devices through the Wi-Fi hotspot function, which is convenient when there is no router at hand and access to the network is needed for a laptop, tablet or other phone. The access point is off, devices are not connected, or the internet is too slow.

In this article you will find step-by-step instructions for all versions. MIUI (including MIUI 14 and HyperOS), tips for fixing common bugs and ways to optimize Internet distribution, and we will also discuss how to save battery power while running the access point for long periods of time, this is true for models with small batteries (for example, the Redmi Note 12 or the Redmi Note 12). POCO X5).

If you’ve never set up a Wi-Fi appliance on Xiaomi, start with the first section.Savvy users can jump straight to problem solving or connectivity optimization.

What is a Xiaomi hotspot and how does it work?

The Wi-Fi Hotspot function turns your smartphone into a mini-router that distributes mobile internet (3G/4G/5G) It works like this, technically:

• 📶 The phone is connected to the network of the mobile operator (for example, MTS, Beeline, Tele2).
• 🔄 Smartphone creates a local Wi-Fi network that can connect to other devices.
• 🌐 All traffic from connected gadgets passes through your phone and tariff plan.

On Xiaomi, this feature is called “Modem Modem” or “Access Point” (depending on the version). MIUI). It is supported on all models, starting with Redmi. 4A (2016) and newer. But there are nuances:

• ⚡ The speed of distribution depends on the generation of the mobile network: 5G (up to 1 Gbps), 4G (up to 150 Mbps), 3G (up to 42 Mbps).
• 🔋 The access point is very expensive battery - up to 20-30% One hour with active use.
• 📱 The number of connected devices is limited: usually up to 10, but on budget models (for example, Redmi). A2) Maybe just 5.

Important: some operators (e.g. Yota or Tinkoff Mobile) block the distribution of the Internet at separate rates. If the access point is turned on but the Internet does not work, check the terms of your tariff.

Step-by-step setting up the access point on Xiaomi

The instructions are suitable for all Xiaomi, Redmi and POCO s MIUI 12 and later (including HyperOS) If you have an older firmware version, update it via Settings. → The phone. → Updating the system.

To turn on the Wi-Fi distribution:

1. Open Settings (the gear icon on the main screen).
2. Go to Network and Internet (or Connections and Sharing on HyperOS).
3. Select Access Point or Modem Modem.
4. Activate the Wi-Fi Access Point switch.
5. Click Access Point Settings to set a network name (SSID) and password.

By default, the network will be called Xiaomi_XXXX (where XXXX — last-minute IMEI Your phone, and your password is automatically generated:

• 🔐 Set a password no shorter than 8 characters with numbers and letters (for example, MiHotspot2026!).
• 📛 Change the name of the network (SSID) unique so as not to be confused with other access points.
• 🔄 In the Security section, select WPA2-PSK (most reliable protocol).

After setting up, connect other devices to the network you created by entering a password. If the connection does not occur, check:

• ✅ Is mobile data on the phone enabled.
• ✅ Is the tariff traffic limit exceeded.
• ✅ Does not block the distribution of your antivirus or firewall.

Features of settings for different Xiaomi models

Although the principle of the access point is the same for all Xiaomi smartphones, there are nuances for specific lines and versions. MIUI. Below are the key differences.

On flagship models (Xiaomi 14 Ultra, Mix Fold 3), the "Intelligent Access Point" function is available.

• 🔄 Switches Wi-Fi range (2.4 GHz or 5 GHz) for better compatibility.
• ⚡ Optimize battery consumption when handing out.
• 📊 Shows detailed statistics of connected devices.

On budget smartphones (Redmi) A2, POCO C51) There are no options, but you can manually:

• 🔋 Disable background applications through Settings → Battery.
• 📶 Select the power saving mode for the access point (if available).

Common Problems and Their Solutions

If the access point on Xiaomi is not working, first check the obvious:

• 📵 Make sure that the mobile internet is on and there is network coverage.
• 💳 Check your balance – you may have run out of gigabytes or money in your account.
• 🔄 Reboot your phone (sometimes helps when crashes) MIUI).

If the problem persists, use our solutions for specific errors:

1. Access point is turned on, but the Internet is not working

Possible causes and ways of correction:

• 🚫 Operator blocks distribution: Call support (e.g. *111# for MTS) and check if the feature is allowed on your tariff. Some operators (e.g. Yota) require you to connect the option "Modem / Access Point".
• ⚙️ Wrong settings APN: Go to Settings. → SIM-maps and mobile networks → Access points (APN) For most operators, a standard profile is suitable, but sometimes manual input is required: Name: Internet APN: Internet.mts.ru (for MTS) Proxy: not specified Port: not specified Username: mts Password: mts Authentication type: PAP
• 🔒 firewall VPN Interfering with distribution: Turn off VPN-programs (e.g. 1.1.1.1 or ProtonVPN) and check the firewall settings in the antivirus.

2. the devices do not connect to the access point

If a laptop or other phone can see the network but cannot connect:

• 🔑 Wrong password: Make sure you enter it correctly (registration is important!). Try changing your password to a simpler temporary one.
• 📶 Wi-Fi Channel Overload: If there are many networks on the 2.4 GHz channel nearby, switch to 5 GHz (available on flagships.
• 📱 Restriction on MAC-Addresses: In some firmware MIUI There's a device filtering function. Turn it off in the Access Point Settings. → Extended. → Filter MAC.

3. The access point itself is off.

If the Internet is interrupted in a few minutes:

• ⏱️ Time-out inaction: In MIUI 14 and HyperOS have an automatic shutdown option. To cancel it, go to Access Point Settings. → Additionally. → Turn off when inactive and choose Never.
• 🔋 Battery savings: If Super Power Saving is enabled, it can block background processes. Turn it off in Settings. → Battery.
• 📡 Weak network signal: If the phone loses communication with the operator tower, the access point also turns off.

💡

If the access point is turned off when the screen is locked, add the Settings app to the battery optimization exception list: Settings → Battery → Optimizing the battery → All applications → Settings → No restrictions.

How to speed up Wi-Fi distribution and save charge

By default, the access point on Xiaomi is not running at maximum speed, here's how to optimize its performance and reduce battery consumption:

1. Increasing Internet speed

• 📶 Choose the right Wi-Fi range: 2.4 GHz: better through walls, but slower (up to 150 Mbps). 5 GHz: faster (up to 866 Mbps), but worse works at a distance. On flagships (Xiaomi 13, POCO F5) You can enable simultaneous distribution on two bands (option Dual band access point).
• 🔄 Change Wi-Fi channel: If there are many networks nearby, choose the least loaded channel. Use applications like Wi-Fi Analyzer (available on Google Play).
• 🚀 Turn off the speed limit: In some firmware MIUI There's a speed limit. Check the access point settings. → Additionally. → Speed limit.

2. Reduced battery consumption

Wi-Fi distribution can be eaten up to 20-30% to reduce the consumption of energy per hour:

• 🔋 Activate Power Saving Mode for the Access Point (if available in your model).
• 📴 Turn off background apps, especially instant messengers and social media.
• 🔌 Connect your phone to charge when you’re on a long hand (for example, if you use it as a laptop router at work).
• 🌡️ Watch out for overheating: If the phone heats up above 45°C, Internet speeds may be falling. Take off your case and avoid direct sunlight.

💡

On HyperOS models (such as Xiaomi 14), there is a hidden option, Optimized Access Point, which automatically balances speed and battery consumption. → Special facilities → Developer functions → Optimization of the access point.

3. Traffic Limitation for Connected Devices

If you have multiple devices connected to your access point, one of them can eat up all the traffic.

• 📊 Turn traffic into the access point settings, and that's going to show you how much data each device is using.
• ⏱️ Set a time limit for guest connections (e.g., 1 hour).
• 🚫 Block unwanted devices through the filter MAC-address.

Security for Wi-Fi with Xiaomi

Open access points are a risk to your privacy and wallet, and here's how to protect yourself:

1. Set up a strong password

Don't use simple passwords like 12345678 or qwerty.

• 🔐 Length: 12-16 symbolism.
• 🔤 Combination: capital + lowercase + figure + symbols (e.g. MiHot)$pot2026!).
• 🔄 Update your password once in a while. 1-2 A month if you often give out the Internet in public places.

Restriction of access

To prevent outsiders from connecting to your network:

• 👥 Turn on the filter. MAC-Addresses (available on most Xiaomi models:

Turn off the access point.

Hide. SSID

Access point settings → Hide the net.

💡

If you often give out Wi-Fi in a cafe or transport, use it. VPN on connected devices (such as Cloudflare’s ProtonVPN or Warp) this will protect your data from being intercepted.

3. Protection against fraudsters

Attackers can create a fake hotspot with a name similar to yours (e.g., a fake hotspot, Xiaomi_1234 instead Xiaomi_1235). To avoid connecting to such a network:

• 🔍 Always check the exact name of the network before connecting.
• 🔒 Turn off auto-connection to open networks on your devices.
• 📱 Xiaomi can enable notification of new connections: Access Point settings → Notifications → Notify about new devices.

💡

Never use a Xiaomi hotspot to transfer sensitive data (such as logging in to an internet bank) without VPN. Attackers can intercept traffic if they connect to your network.

Alternative ways to distribute the Internet with Xiaomi

If Wi-Fi doesn’t work for some reason, you can distribute the Internet in other ways:

1. USB-modem

Suitable for connecting a laptop or PC. Advantages:

• ⚡ More stable connection (no interference like Wi-Fi).
• 🔋 Lower battery consumption (the phone is charged from the USB).