Xiaomi 10 is a powerful device that not only accepts, but can also distribute the Internet to other gadgets. This feature, called hotspot mode, will come in handy when traveling, in the country or when the main router suddenly stopped working. However, many users face problems: slow speed, frequent connection breaks or inability to connect devices. In this article, we will discuss all the nuances of setting up, optimizing and troubleshooting when distributing Wi-Fi from Xiaomi 10.
It is important to understand that the process of distributing the Internet depends not only on the model of the phone, but also on the version. MIUI, carrier and even the type of SIM-We tested the instructions on the latest firmware versions (including: MIUI 14 and HyperOS) and took into account the peculiarities of working with different mobile operators, from MTS to Tele2. If you have previously tried to configure the access point and encountered errors, here you will find solutions.
Before you get to the settings, check two key points: the presence of mobile Internet on the phone (the icon 4G/5G in the status bar) and sufficient battery power (Wi-Fi distribution actively consumes energy).
1.Preparing the phone for the distribution of Wi-Fi
Before activating the access point, you need to follow several preliminary steps, which will help to avoid common mistakes, such as the lack of Internet on connected devices or automatic disabling of the distribution.
First, make sure your Xiaomi 10 has the latest firmware installed. Go to Settings → About Phone → System Update. Updates often contain fixes for Wi-Fi Direct and modem features, which directly affects the stability of the handset. If the update is available, install it and restart the device.
Second, check the mobile network settings:
- 📶 Network type: Go to Settings → SIM-maps and mobile networks → [Yours. SIM] → Network type and select 4G (preferably 5G, If your rate supports, the distribution is 3G It will work slower.
- 🔄 Data roaming: Turn off the data roaming option in the same menu if you are abroad – this will prevent unexpected costs.
- 📥 Traffic Limit: Make sure that Traffic Savings is not activated (located in Settings) → Connections and sharing → Traffic savings: It can block data transmission to connected devices.
⚠️ Note: If you use two of these SIM-maps, the access point will only distribute the Internet from the one selected as the Main for mobile data. → SIM-maps and mobile networks → Mobile Internet.
2. Activation of the access point mode on Xiaomi 10
Now, to the basic process, you can turn on the Wi-Fi distribution on Xiaomi 10 in two ways: through the notification panel or the settings menu. We recommend using the second method, since it allows you to immediately configure the network settings (name, password, frequency range).
Step-by-step:
- Open Settings (the gear icon on the main screen).
- Go to Connections and Sharing (in some versions of MIUI it may be called Network and Internet).
- Select modem modem and access point.
- Slip on the Wi-Fi hotspot.
- Activate the slider at the top of the screen, and then you'll see a notification that you're in mode.
By default, the network will have a standard name (for example, Xiaomi_10_XXXX) You can change them by clicking on Setting up the Wi-Fi hotspot. Here you will see the following settings:
| Parameter | Recommended value | Explanation |
|---|---|---|
| Network name (SSID) | Latin letters and numbers (e.g., Latin letters and numbers, Mi10_Hotspot) | Avoid Cyrillic and special characters – some devices don’t see these networks. |
| Security | WPA2-PSK | The most reliable and compatible option is WPA3, which may not be supported by older devices. |
| Password. | At least 8 characters, with numbers and letters | A password that is too simple (e.g., 12345678) will make the network vulnerable to hacking. |
| Frequency range | 2.4 GHz or 5 GHz | 5 GHz is faster but has a shorter range. 2.4 GHz is better at passing through walls. |
| Auto-disconnection | Never or in 10 minutes. | If you select 5 minutes later, the access point will often be shut down when inactivity is not present. |
⚠️ Warning: If the Connected, Unconnected Access error appears on connected devices after the hotspot is turned on, check if the phone has either Flight Mode or Battery Savings activated. Both options block data transmission.
Mobile Internet is working (there are) 4G/5G status-line)|
Battery charge over 30% |
Traffic Savings is disabled |
SIM-The card is selected as the main one for mobile data|
Phone's off-flight.
-->
3. Optimization of connection speed and stability
Even if the access point is turned on, the Internet speed on connected devices can be slow, due to operator restrictions, phone settings, or external interference.
1. Change the frequency range:
- 📶 If the devices are in another room, select 2.4GHz – this range is better through obstacles.
- ⚡ If connected gadgets support 5 GHz and are nearby, use it for maximum speed.
2. Limit the number of connected devices: Xiaomi 10 works steadily with 5-8 devices at a time. If you connect more, the speed will drop. To turn off unnecessary gadgets, go to Settings → Modem Mode → Wi-Fi Access Point → Connected devices and remove unnecessary ones.
Set Network Priority: Some operators (like MegaFon or Beeline) limit the speed of the distribution.
- 🔄 Restart the phone after the access point is turned on.
- 📱 Temporarily turn off the second. SIM-The card (if any) in the settings → SIM-maps and mobile networks.
- 🌐 Use it. VPN on a phone (e.g. Cloudflare) WARP), if the operator blocks the distribution.
💡
If the speed drops sharply through 1-2 GB of traffic, check your tariff limits. Some operators (such as Tele2) limit the speed after exhausting a high-speed packet, even if you distribute the Internet from your phone.
A critical feature of Xiaomi 10: when you distribute Wi-Fi through 5 GHz, the maximum speed is limited to 300 Mbps, even if your tariff supports 1 Gbps. This is the hardware limitation of the model associated with the Qualcomm Snapdragon 865 chip.
4. Solving common problems
Even with the right setup, there can be errors, and we've collected the most common problems and ways to fix them:
🔴 Access point is turned on, but devices are not connected
Causes and solutions:
- 🔑 Incorrect password: Make sure you enter it on the connected device without errors.The password is case sensitive!
- 📵 Conflict IP-Addresses: Go to Settings → Modem mode → Wi-Fi hotspot → In addition, turn on the option to use static IP.
- 📡 Interference from other networks: Change your Wi-Fi channel manually (in the same additional settings). For 2.4 GHz, choose channels 1, 6 or 11 - they least overlap.
🟡 The connection is there, but the internet is not working.
This is the most common problem. Check this out.
- The phone should have a 4G/5G icon in the status bar, not an H+ or E icon.
- Turn off the VPN on your phone (if it’s enabled) – it can block data transfers.
- Try switching. APN (Operator access point). Path: Settings → SIM-maps and mobile networks → [Yours. SIM] → Access points (APN). Choose. APN your operator or create a new one with options from his website.
🟢 The access point is permanently off.
If the distribution stops after a few minutes, the reasons may be:
- 🔋 Saving charge: Turn it off in Settings → Battery and productivity → Saving charge.
- ⏱️ Auto-Disable: In the access point settings, select Never instead of Through 5/10 minute.
- 📴 Problems with SIM-card: Try to re-extract and re-paste it. If that doesn't work, contact the operator - perhaps locking the distribution at the tariff level.
What to do if the operator blocks the distribution?
5. Alternative ways of distributing the Internet
If the Wi-Fi handout is not working or you need to connect a device without Wi-Fi support (such as an old printer or laptop), use alternative methods:
🔌 USB-modem
This method is suitable for connecting to computers running Windows, macOS or Linux. data transfer speed via USB is usually higher than over Wi-Fi, and the phone’s charge is consumed more slowly.
How to turn on:
- Connect Xiaomi 10 to your computer through the original USB-cable.
- In the phone, select File Transfer (MTP) mode (notification will appear).
- Go to Settings. → Modem mode and access point and activate USB-modem.
- A new network connection with Internet access will appear on the computer.
📶 Bluetooth modem
Less popular, but useful method for devices that do not support Wi-Fi or USB. speed will be lower (up to 10 Mbps), but battery consumption is minimal.
Instructions:
- Turn on Bluetooth on both devices.
- Connect them (in Bluetooth settings on your phone and plug-in gadget).
- In your phone, go to Settings → Modem Modem and Access Point → Bluetooth modem.
- On the connected device, select Xiaomi 10 as the source of the internet.
Bluetooth modem is convenient for connecting smart watches or fitness bracelets that do not need high-speed Internet.
💡
USB-The modem is the most stable and fastest way to distribute, but requires cable. Wi-Fi is more convenient for multiple devices, and Bluetooth is suitable for low-power gadgets.
6.Security in Wi-Fi distribution
Sharing the Internet from your phone opens up potential vulnerabilities for hacker attacks, and the following steps will help protect your data:
1. Use a complex password: Avoid simple combinations like 12345678 or qwerty.
- 🔐 Length of at least 12 characters.
- 🔤 Combination of upper and lowercase letters, numbers and special symbols (for example, Mi10_Hot$pot2026!).
2. Limit network visibility: In the access point settings (Settings → Modem Mode → Wi-Fi Access Point → Additional), turn on the option to Hide the Network, then only those who know the exact name (SSID) and password will be able to connect.
3. Control connected devices: Regularly check the list of connected gadgets in Settings → Modem Mode → Wi-Fi Access Point → Connected devices. If you see an unfamiliar device, immediately turn it off and change the password.
4. Disable the access point when it is not needed: Prolonged modem operation not only consumes charge, but also increases the risk of hacking. Always turn off the distribution after use.
⚠️ Warning: If you share the Internet in a public place (cafe, airport), never use an open network without a password, which will allow anyone to connect to your phone and potentially access personal data.
7. Battery consumption and how to reduce it
Wi-Fi distribution is one of the most energy-consuming features of a smartphone. Xiaomi 10 with a battery of 4780 mAh in hotspot mode discharges by 15-20% per hour when used actively. To extend the time, follow these tips:
1.Use charging during handout: If possible, connect your phone to a powerbank or outlet.This will not only prevent discharge, but can also increase data transfer speed (as the phone will not limit performance to save energy).
2. Reduce screen brightness: The screen is the second most power-efficient component after the Wi-Fi module. Set brightness by 30-50% and reduce the time of automatic shutdown of the display to 15 seconds.
3. disable background apps: Close all unnecessary programs, especially those that use geolocation or synchronization (e.g. Google Maps, Photos, Social Networks).
- 📱 Click on the recent apps button (square at the bottom of the screen).
- 🚫 Close all applications with swipe up.
- 🔄 Go to Settings. → Annexes → Autostart and disable Autostart for unnecessary programs.
4. Activate Power Saving Mode (but not Charge Saving!): In Settings → Battery and Performance, select Balanced Mode. It reduces energy consumption without having a strong impact on the speed of the dispensing.
5. Use 2.4 GHz instead of 5 GHz: The 5 GHz range is faster but requires more power to maintain the connection.If the speed is not critical, switch to 2.4 GHz.
💡
If you need to distribute the Internet for a long time (for example, at a picnic), bring an external battery with a capacity of at least 10,000 mAh. This will allow you to maintain the distribution of 6-8 hours without recharging.