How to give away the Internet with Xiaomi Redmi Note 8 Pro: 3 ways + error solving

Xiaomi Redmi Note 8 Pro is still a popular choice thanks to the powerful Mediatek Helio G90T processor and support for modern networks. But not everyone knows that the device can work as a full-fledged Wi-Fi router, distributing mobile Internet to a laptop, tablet or other phone, this feature will come in handy when traveling, in the country or when the main router suddenly stopped working.

In this article, you’ll find three proven ways to enable the access point on the Redmi Note 8 Pro, including hidden MIUI settings that not everyone knows. We’ll also look at common bugs (like when devices don’t connect or speeds drop) and give unique recommendations for optimizing your Internet experience that you won’t find in standard instructions. All methods tested on MIUI 12–14 and are relevant for firmware in 2026.

1. Standard method: through the settings menu

The most reliable method is to use the built-in MIUI settings, which are suitable for most firmware versions and do not require superuser rights.

1. Open the Settings app (the gear icon on the home screen).
2. Go to the section Network and Internet → Access Point and modem.
3. Slip on the Wi-Fi Access Point.
4. Activate the slider at the top of the screen.

After activation, the system automatically assigns a network name (usually Redmi Note). 8 Pro_XXXX) You can change them by clicking on Setting up the access point:

• 🔒 Set a password no shorter 8 symbols with numbers and letters (for example, MiWiFi_2026!).
• 📡 Selecting a 5GHz band if your devices support it will reduce interference.
• 🔄 Disable the option to disable inactivity if you plan a long connection.

Make sure that mobile data is included

Check balance (at a tariff with limited traffic)

Disable VPN (can block distribution)

Reboot your phone when you have connection errors-->

If after switching on the access point, other devices do not see the network, check:

• 📶 Signal level of the mobile network (must be at least 2-3 divisions).
• 🔋 Battery charge (at a level below 15% MIUI It can automatically disable the access point).
• 🛡️ Firewall settings (antiviruses like Avast or 360 Security sometimes block the distribution).

2. Quick access through the notification panel

If you need to give the Internet without digging into the menu, use the Quick Settings Panel, which works even on a locked screen (if the appropriate option is enabled in the security settings).

Instructions:

1. Swipe your finger down to open the notification panel.
2. Find the Access Point icon (usually next to Wi-Fi and Bluetooth). If it's not available, click on the pencil (Edit) and add it.
3. Hold your finger on the icon 1-2 seconds – the settings menu will open.
4. Activate the slider and change the name/password of the network if necessary.

The advantage of this is speed, but be careful.

⚠️ Attention: On some firmware MIUI If you turn on quickly through the panel, the access point only works for 10 minutes, if you don't connect any devices.

Every day.

1-2 times a week

Only in emergency cases.

Never used it.-->

3. Hidden settings for experienced users

If standard methods do not work (for example, after updating the firmware), you can use the engineering menu or ADB-These are ways that require caution, but sometimes they save in difficult situations.

Method 1: Engineering menu (to diagnose problems)

1. Open the Phone app and enter the combination: ##4636##.
2. Select Phone Information → scroll down to the Wi-Fi information block.
3. Check the status of the Wi-Fi AP (should be Enabled).

Method 2: ADB-commands (for forced inclusion)

If the access point is turned off by itself, try:

adb shell settings put global tether_dun_required 0


adb shell svc wifi enable




adb shell svc tether start

These commands are resetting the operator's restrictions on Internet distribution, and attention: they require developer rights and PC connectivity. USB-debugging.

4. Optimization of speed and stability of distribution

Many users complain that when you distribute the Internet with the Redmi Note 8 Pro, the speed drops or the connection breaks.

For maximum speed:

• 📶 Use it. SIM-support-card 4G+ or VoLTE (check with the operator).
• 🔌 Connect your phone to charge – with low battery levels MIUI limit productivity.
• 🛠️ Update the firmware to the latest version (in Settings) → The phone. → Updating the system).

💡

If you're giving the Internet to a laptop, turn off the Wi-Fi adapter settings in the laptop's settings, the Allow Shutdown option to save power, and this will reduce data latency.

5. Common mistakes and their solutions

Even after you set it up properly, you can have problems, and here are the most common ways to fix them:

Error 1: "I failed to turn on the access point"

Reasons:

• 🚫 The operator blocks the distribution (relevant for tariffs with unlimited Internet).
• 🔄 Conflict with VPN proxy.
• 📱 Failure of the Wi-Fi module.

Decision:

1. Reboot the phone.
2. Turn off VPN in Settings → Connections → VPN.
3. Try resetting your network settings: Settings → System → Settings Reset → Reset your Wi-Fi, mobile network, and Bluetooth settings.

Mistake 2: Connected devices don’t have access to the Internet

This happens when:

• 🌐 Mobile data disabled on the main phone.
• 🔒 Static set up IP proxy.
• 🛡️ Activated mode In the plane.

Decision:

1. Check that the mobile internet is enabled (Settings) → SIM-maps and mobile networks).
2. In the access point settings, select IP → DHCP settings.
3. Turn off the In-plane mode and restart the access point.

⚠️ Attention: On some firmware MIUI After the update, the access point settings are reset. If the distribution stops working after the update, reset the network settings (see above) or reset to the factory settings (pre-made backup).

6. Alternative ways of distributing the Internet

If Wi-Fi doesn’t work for some reason, you can use other methods:

1. USB-modem

Suitable for connecting a laptop or PC:

1. Connect the phone and computer with the original USB-cable.
2. In the phone settings, select Access Point and modem → USB-modem.
3. On the PC in Network connections will appear a new device.

Advantages: more stable Wi-Fi, less battery consumption.

Disadvantages: requires cable, works with only one device.

2. Bluetooth modem

Suitable for tablets or older laptops without Wi-Fi:

1. Turn on Bluetooth on both devices.
2. Then, put them together (input the same one). PIN-code).
3. On the phone, activate the Bluetooth modem in the modem settings.

Advantages: Low battery consumption.

Disadvantages: low speed (up to 3 Mbps), suitable only for mail and instant messengers.

💡

USB-The modem is the most reliable way to distribute the Internet with minimal delays. Use it for online games or video conferencing.

7. Security in the distribution of the Internet

By sharing Wi-Fi from your Redmi Note 8 Pro, you're opening up your local network to avoid the risks of:

• 🔐 Always set a strong password (do not use date of birth or simple combinations like 12345678).
• 🕵️ Turn off the access point when you don’t need it.
• 📵 Limit the number of connected devices (optimally no more than 5).
• 🛡️ Use it. VPN on your main phone, if you are giving out the internet in public places.

Also note:

• 📊 Traffic monitoring: C Settings → SIM-maps and mobile networks → Traffic usage can be seen as how much data each connected device consumes.
• 🚨 Warnings about suspicious activity: If your phone starts to warm up for no apparent reason, check the list of connected devices – it may be that a stranger has connected to your network.

If you often give out the Internet in cafes or transportation, consider installing network control applications like NetGuard or GlassWire, which show what data is being transmitted through your hotspot.

FAQ: Frequent questions about giving away the internet